You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ath79/image
Davy Hollevoet 394f54ee62 ath79/nand: add support for Netgear WNDR4300TN
This patch adds support for the WNDR4300TN, marketed by Belgian ISP
Telenet. The hardware is the same as the WNDR4300 v1, without the
fifth ethernet port (WAN) and the USB port. The circuit board has
the traces, but the components are missing.

Specifications:
* SoC: Atheros AR9344
* RAM: 128 MB
* Flash: 128 MB NAND flash
* WiFi: Atheros AR9580 (5 GHz) and AR9344 (2.4 GHz)
* Ethernet: 4x 1000Base-T
* LED: Power, LAN, WiFi 2.4GHz, WiFi 5GHz, WPS
* UART: on board, to the right of the RF shield at the top of the board

Installation:

* Flashing through the OEM web interface:
  + Connect your computer to the router with an ethernet cable and browse
    to http://192.168.0.51/
  + Log in with the default credentials are admin:password
  + Browse to Advanced > Administration > Firmware Upgrade in the Telenet
    interface
  + Upload the Openwrt firmware: openwrt-ath79-nand-netgear_wndr4300tn-squashfs-factory.img
  + Proceed with the firmware installation and give the device a few
    minutes to finish and reboot.

* Flashing through TFTP:
  + Configure your wired client with a static IP in the 192.168.1.x range,
    e.g. 192.168.1.10 and netmask 255.255.255.0.
  + Power off the router.
  + Press and hold the RESET button (the factory reset button on the bottom
    of the device, with the gray circle around it, next to the Telenet logo)
    and turn the router on while keeping the button pressed.
  + The power LED will start flashing orange. You can release the button
    once it switches to flashing green.
  + Transfer the image over TFTP:
    $ tftp 192.168.1.1 -m binary -c put openwrt-ath79-nand-netgear_wndr4300tn-squashfs-factory.img

Signed-off-by: Davy Hollevoet <github@natox.be>
[use DT label reference for adding LEDs in DTSI files]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
..
bin ath79: add support for PISEN WMB001N 5 years ago
lzma-loader ath79: move lzma-loader to the end of available RAM 4 years ago
Makefile treewide: simplify inclusion of subtarget image files 4 years ago
common-buffalo.mk ath79: sort device definitions in image/* 5 years ago
common-mikrotik.mk ath79/mikrotik: create shared device definitions for nor and nand 4 years ago
common-netgear.mk ath79: reorganize common image definitions for Netgear 4 years ago
common-tp-link.mk ath79: replace custom uImageArcher generation 4 years ago
common-yuncore.mk ath79: add support for YunCore TFTP image generation 4 years ago
generic-tp-link.mk ath79: add support for TP-Link CPE610 v2 4 years ago
generic-ubnt.mk ath79: harmonize model names for Ubiquiti devices 4 years ago
generic.mk ath79: reorganize common image definitions for Netgear 4 years ago
mikrotik.mk ath79/mikrotik: create shared device definitions for nor and nand 4 years ago
nand.mk ath79/nand: add support for Netgear WNDR4300TN 4 years ago
tiny-netgear.mk ath79: disable default build for devices with 4M flash 4 years ago
tiny-tp-link.mk ath79: fix dsa binding for TP-Link TL-WR941ND v2 4 years ago
tiny.mk ath79: Do not build buffalo_whr-g301n by default 4 years ago