You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/package/mac80211/patches/404-ath9k-uninline-ath9k_io...

105 lines
3.6 KiB
Diff

From dd51972ba5d11df434faf9171fe02c0cc48d35c1 Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 29 Apr 2009 08:52:16 +0200
Subject: [PATCH] ath9k: uninline ath9k_io{read,write}32 routines
The spin_lock handling uses lots of instructions on some archs.
With this patch the size of the ath9k module will be significantly
smaller.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
Example results on different platforms:
xscale: 468344 -> 293022 (62.6%)
mips32: 549847 -> 389421 (70.8%)
mips32r2: 510520 -> 394020 (77.2%)
ppc40x: 365153 -> 296928 (81.3%)
drivers/net/wireless/ath9k/ath9k.h | 33 +------------------------------
drivers/net/wireless/ath9k/hw.c | 32 +++++++++++++++++++++++++++++++
2 files changed, 34 insertions(+), 31 deletions(-)
--- a/drivers/net/wireless/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath9k/ath9k.h
@@ -721,36 +721,7 @@ void ath9k_wiphy_pause_all_forced(struct
bool ath9k_wiphy_scanning(struct ath_softc *sc);
void ath9k_wiphy_work(struct work_struct *work);
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-static inline void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
-{
- if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
- unsigned long flags;
- spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
- iowrite32(val, ah->ah_sc->mem + reg_offset);
- spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
- } else
- iowrite32(val, ah->ah_sc->mem + reg_offset);
-}
-
-static inline unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
-{
- u32 val;
- if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
- unsigned long flags;
- spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
- val = ioread32(ah->ah_sc->mem + reg_offset);
- spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
- } else
- val = ioread32(ah->ah_sc->mem + reg_offset);
- return val;
-}
+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);
#endif /* ATH9K_H */
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -84,6 +84,38 @@ static u32 ath9k_hw_mac_to_clks(struct a
return ath9k_hw_mac_clks(ah, usecs);
}
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
+{
+ if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ iowrite32(val, ah->ah_sc->mem + reg_offset);
+}
+
+unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
+{
+ u32 val;
+ if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+ unsigned long flags;
+ spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
+ } else
+ val = ioread32(ah->ah_sc->mem + reg_offset);
+ return val;
+}
+
bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
{
int i;