openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Andrey Bondar 326e488c7b ath79: add support for 8devices Rambutan board Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 2x USB2.0 host - 2x UART - SPI, I2C, GPIO Flash instructions: Upgrade from ar71xx target: sysupgrade -F /tmp/openwrt-ath79-nand-8dev_rambutan-squashfs-sysupgrade.tar or upgrade from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 openwrt-ath79-nand-8dev_rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Petr Štetiar <ynezz@true.cz> [copy&pasted missing commit description] Signed-off-by: Andrey Bondar <a.bondar@8devices.com>		4 years ago
.github	build: Update README & github help	6 years ago
config	kernel: rename CONFIG_NETPRIO_CGROUP to CONFIG_CGROUP_NET_PRIO	4 years ago
include	build: conditionally enable testing-kernel feature	4 years ago
package	dropbear: make rsa-sha2-256 pubkeys usable again	4 years ago
scripts	build,json: fix build failure in case no data is found	4 years ago
target	ath79: add support for 8devices Rambutan board	4 years ago
toolchain	toolchain: remove gcc libssp and use libc variant	4 years ago
tools	ramips: add support for TP-Link RE500 v1	4 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	Revert ".gitignore: ignore more scripts/config output"	4 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	merge: base: update base-files and basic config	6 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	build: refactor JSON info files to `profiles.json`	4 years ago
README	build: switch to Python 3	5 years ago
feeds.conf.default	feeds: add freifunk feed	4 years ago
rules.mk	rules.mk: remove "$(STAGING_DIR)/include"	5 years ago

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org