openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Piotr Dymacz 31952dbd1c ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N As we already have support for CF-E316N v2 and many devices from this vendor look similar, the support was included in existing mach-*.c file, with few cleanups and fixes. All 3 devices are based on Qualcomm/Atheros QCA9531 v2. COMFAST CF-E320N v2 is a ceiling mount AP with PoE support. Short specification: - 650/393/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, both with PoE support - 64 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - 2x internal antennas - 1x RGB LED, 1x button - UART (J1), GPIO (J9) and USB (J2) headers on PCB - external watchdog (Pericon Technology PT7A7514) COMFAST CF-E520N/CF-E530N are in-wall APs with USB and PoE support. They seem to have different only the front panel. Short specification: - 650/393/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, WAN with PoE support - 1x USB 2.0 (in CF-E520N covered by panel, available on PCB) - 32 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - 2x internal antennas - 1x LED, 1x button - UART (J1) headers on PCB Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		8 years ago
.github	Add Issue submission template (redirect to bugs.lede-project.org)	8 years ago
config	x86: bump default kernel partition size to 16M	8 years ago
docs	build: Prevent more gzip timestamps	9 years ago
include	build: add support code for appending metadata to images	8 years ago
package	base-files: validate metadata of sysupgrade images	8 years ago
scripts	scripts/feeds: use git rev-parse for getting revision	8 years ago
target	ar71xx: add support for COMFAST CF-E320N v2 and CF-E520N/CF-E530N	8 years ago
toolchain	toolchain: fix MIPS softfloat build issue for gcc-5.4.0	8 years ago
tools	firmware-utils: tplink-safeloader: keep per-device info on trailing char	8 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	build: add integration for managing opkg package feed keys	9 years ago
BSDmakefile	add missing copyright header	18 years ago
Config.in	branding: add LEDE branding	8 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	build: move merged package directory from bin/ to staging_dir	8 years ago
README	README: Update project README	8 years ago
feeds.conf.default	feeds: switch from github to lede-project.org mirrors	8 years ago
rules.mk	rules.mk: add STAGING_DIR_HOSTPKG variable	8 years ago

README

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org