You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
646d95c374
TP-Link Archer C60 v3 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. It seems to be identical to the v2 revision, except that it lacks a WPS LED and has different GPIO for amber WAN LED. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 6x LED, 2x button - UART header on PCB Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed IP address 192.168.0.66 2. Download *-factory.bin image and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery While TFTP works for OpenWrt images, my device didn't accept the only available official firmware "Archer C60(EU)_V3.0_190115.bin". In contrast to earlier revisions (v2), the v3 contains the (same) MAC address twice, once in 0x1fa08 and again in 0x1fb08. While the partition-table on the device refers to the latter, the firmware image contains a different partition-table for that region: name device firmware factory-boot 0x00000-0x1fb00 0x00000-0x1fa00 default-mac 0x1fb00-0x1fd00 0x1fa00-0x1fc00 pin 0x1fd00-0x1fe00 0x1fc00-0x1fd00 product-info 0x1fe00-0x1ff00 0x1fd00-0x1ff00 device-id 0x1ff00-0x20000 0x1ff00-0x20000 While the MAC address is present twice, other data like the PIN isn't, so with the partitioning from the firmware image the PIN on the device would actually be outside of its partition. Consequently, the patch uses the MAC location from the device (which is the same as for the v2). Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> |
4 years ago | |
|---|---|---|
| .. | ||
| autoconf | 7 years ago | |
| automake | 5 years ago | |
| b43-tools | 5 years ago | |
| bc | 5 years ago | |
| bison | 4 years ago | |
| cbootimage | 5 years ago | |
| cbootimage-configs | 5 years ago | |
| ccache | 4 years ago | |
| cmake | 4 years ago | |
| coreutils | 5 years ago | |
| dosfstools | 7 years ago | |
| e2fsprogs | 4 years ago | |
| elftosb | 7 years ago | |
| expat | 5 years ago | |
| findutils | 6 years ago | |
| firmware-utils | 4 years ago | |
| flex | 6 years ago | |
| flock | 8 years ago | |
| genext2fs | 7 years ago | |
| gengetopt | 5 years ago | |
| gmp | 4 years ago | |
| include | 4 years ago | |
| isl | 5 years ago | |
| kernel2minor | 6 years ago | |
| libelf | 5 years ago | |
| libressl | 4 years ago | |
| libtool | 7 years ago | |
| lzma | 7 years ago | |
| lzma-old | 6 years ago | |
| m4 | 6 years ago | |
| make-ext4fs | 4 years ago | |
| missing-macros | 9 years ago | |
| mkimage | 5 years ago | |
| mklibs | 5 years ago | |
| mm-macros | 6 years ago | |
| mpc | 6 years ago | |
| mpfr | 5 years ago | |
| mtd-utils | 5 years ago | |
| mtools | 5 years ago | |
| padjffs2 | 8 years ago | |
| patch | 5 years ago | |
| patch-image | 7 years ago | |
| patchelf | 4 years ago | |
| pkgconf | 4 years ago | |
| qemu | 4 years ago | |
| quilt | 5 years ago | |
| sdimage | 5 years ago | |
| sed | 4 years ago | |
| sparse | 6 years ago | |
| squashfs | 7 years ago | |
| squashfskit4 | 5 years ago | |
| sstrip | 6 years ago | |
| tar | 5 years ago | |
| upslug2 | 5 years ago | |
| wrt350nv2-builder | 4 years ago | |
| xz | 5 years ago | |
| zip | 5 years ago | |
| zlib | 6 years ago | |
| Makefile | 4 years ago | |