You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ramips
Davide Fioravanti 8c13ebd3ad ramips: add support for Edimax Gemini RE23S
Hardware
--------
SoC:   Mediatek MT7621AT (880 MHz, 2 cores 4 threads)
RAM:   128MB
FLASH: 16MB NOR (Macronix MX25L12805D)
ETH:   1x 10/100/1000 Mbps Ethernet (MT7530)
WIFI:
  - 2.4GHz: 1x MT7615 (4x4:4)
  - 5GHz:   1x MT7615 (4x4:4)
  - 4 antennas: 2 external detachable and 2 internal
BTN:
  - 1x Reset button
  - 1x WPS button
LEDS:
  - 1x Green led (Power)
  - 1x Green-Amber-Red led (Wifi)
UART:
  - 57600-8-N-1

Everything works correctly.

Installation
------------
Flash the factory image directly from OEM web interface.
(You can login using these credentials: admin/1234)

Restore OEM Firmware
--------------------
Flash the OEM "bin" firmware directly from LUCI.
The firmware is downloadable from the OEM web page.
Warning: Remember to not keep settings!
Warning2: Remember to force the flash.

Restoring procedure tested with RE23_1.08.bin

MAC addresses
-------------
factory 0x4     *:24
factory 0x8004  *:25
Cimage  0x07    *:24
Cimage  0x0D    *:24
Cimage  0x13    *:24
Cimage  0x19    *:25

No other addresses were found in factory partition.

Since the label contains both the 2.4GHz and 5GHz mac address I decided
to set the 5GHz one as label-mac-device. Moreover it also corresponds
to the lan mac address.

Notes
-----
The wifi led in the OEM firmware changes colour depending on the signal
strength. This can be done in OpenWrt but just for one interface.
So for now will not be any default action for this led.

If you want to open the case, pay attention to the antenna placed on
the bottom part of the front cover.
The wire is a bit short and it breaks easily. (I broke it)

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
[fix two typos and add extended MAC address section to commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
..
base-files/etc treewide: drop shebang from non-executable target files 4 years ago
dts ramips: add support for Edimax Gemini RE23S 4 years ago
files/drivers ramips: fix sd polling 4 years ago
image ramips: add support for Edimax Gemini RE23S 4 years ago
mt76x8 ramips: add support for TP-Link RE220 v2 4 years ago
mt7620 treewide: drop shebang from non-executable target files 4 years ago
mt7621 ramips: add support for Edimax Gemini RE23S 4 years ago
patches-4.14 kernel: Update kernel 4.14 to version 4.14.187 4 years ago
patches-5.4 kernel: bump 5.4 to 5.4.48 4 years ago
rt288x ramips: remove default switch setup in 02_network 4 years ago
rt305x treewide: drop shebang from non-executable target files 4 years ago
rt3883 treewide: drop shebang from non-executable target files 4 years ago
Makefile ramips: add 5.4 as testing kernel 4 years ago
modules.mk ramips: fix path for dma-ralink and mtk-hsdma 4 years ago