dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
39,680 Commits
2 Branches
0 Tags
653 MiB
Diff 68.3%
C 21%
Makefile 4.7%
Shell 2.3%
Roff 1.6%
Other 2%
 
 
 
 
 
 
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '22d982ea00'
${ noResults }
Go to file
Felix Fietkau 22d982ea00 ramips: add support for switching between 3-byte and 4-byte addressing on w25q256 flash 
On some devices the flash chip needs to be in 3-byte addressing mode during
reboot, otherwise the boot loader will fail to start.
This mode however does not allow regular reads/writes onto the upper 16M
half. W25Q256 has separate read commands for reading from >16M, however
it does not have any separate write commands.
This patch changes the code to leave the chip in 3-byte mode most of the
time and only switch during erase/write cycles that go to >16M
addresses.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
 		7 years ago
.github github: include pull request template 7 years ago
config mpc85xx: Enable initramfs for p1020 subtarget 7 years ago
include build: actually fix the creation of PKG_INFO_DIR 7 years ago
package nghttp2: switch to release tarball 7 years ago
scripts treewide: fix shellscript syntax errors/typos 7 years ago
target ramips: add support for switching between 3-byte and 4-byte addressing on w25q256 flash 7 years ago
toolchain build: use KERNEL_MAKE_FLAGS for kernel file compilations 7 years ago
tools tools/squashfs4: include sysmacros.h explicitly 7 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 12 years ago
.gitignore gitignore: add /overlay 7 years ago
BSDmakefile add missing copyright header 17 years ago
Config.in branding: add LEDE branding 8 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile build: prepare config.seed before package compilation 7 years ago
README README: Update project README 8 years ago
feeds.conf.default Add video feed to feeds.conf.default 7 years ago
rules.mk rukes.mk: this patch broken grub2 builds 7 years ago

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org