You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ramips
Chuanhong Guo a4c84b2d73 ramips: add support for Phicomm K2P
It uses one MT7615D radio chip with DBDC mode enabled. This mode allows
this single chip act as an 2x2 11n radio and an 2x2 11ac radio at the
same time. However mt76 doesn't  support it currently so there is no
wireless available.

Specification:
- SoC: MediaTek MT7621AT
- Flash: 16 MB
- RAM: 128 MB
- Ethernet: 1 x WAN (10/100/1000Mbps) and 4 x LAN (10/100/1000 Mbps)
- Wireless radio: MT7615D on PCIE0
- UART: 1 x UART on PCB - 57600 8N1

Issue:
- Wireless radio doesn't work due to the lack of driver.

Flash instruction:
Using UART:
1. Configure PC with a static IP address and setup an TFTP server.
2. Put the firmware into the tftp directory.
3. Connect the UART line as described on the PCB.
4. Power up the device and press 2,then follow the instruction to
   set device and tftp server IP address and input the firmware
   file name.U-boot will then load the firmware and write it into
   the flash.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
7 years ago
..
base-files ramips: add support for Phicomm K2P 7 years ago
dts ramips: add support for Phicomm K2P 7 years ago
files-4.9/drivers/net/ethernet/mtk ramips: add jumbo frame support for v4.9 7 years ago
image ramips: add support for Phicomm K2P 7 years ago
mt7620 kernel: cleanup CONFIG_SCHED_HRTICK 7 years ago
mt7621 ramips: bump to v4.9 7 years ago
mt7628 ramips: add support for TP-Link TL-WR840N v4 and TL-WR841N v13 7 years ago
mt7688 kernel: cleanup CONFIG_SCHED_HRTICK 7 years ago
patches-4.9 kernel: update kernel 4.9 to 4.9.37 7 years ago
rt288x kernel: cleanup CONFIG_SCHED_HRTICK 7 years ago
rt305x kernel: cleanup CONFIG_SCHED_HRTICK 7 years ago
rt3883 kernel: cleanup CONFIG_SCHED_HRTICK 7 years ago
Makefile ramips: bump to v4.9 7 years ago
modules.mk ramips: sound-mt7620: fix dependencies for kernel 4.9 7 years ago