dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
14,182 Commits
2 Branches
0 Tags
653 MiB
Diff 68.3%
C 21%
Makefile 4.7%
Shell 2.3%
Roff 1.6%
Other 2%
 
 
 
 
 
 
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '15e8d2e0b7'
${ noResults }
Go to file
Florian Fainelli 15e8d2e0b7 add net5501 support 
This patch brings up the net5501 platform.

Note that the x86/ target included support for all x86/ class
processors.  That's not technically correct.  This should be constrained
only to the "generic" subtarget.  Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.

It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't.  Again, moving
that to the generic subtarget.

Fortunately, this was a fairly benign tweak.

The net5501 board includes the following logic:

Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C

Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>

SVN-Revision: 20794
 		14 years ago
docs Add documentation for passphrase option. 15 years ago
include netfilter: extension fixes (partially closes: #7045) * add missing xt_owner (2.6) * enable ipt_quota (2.4), disabled in [8499] is building fine with recent iptables * add missing ipt_nat_tftp (2.4) * add missing nf_nat_amanda (2.6) 14 years ago
package add net5501 support 14 years ago
scripts rework board detection 14 years ago
target add net5501 support 14 years ago
toolchain toolchain/binutils: building gas for arm-*-uclibc systems requires linking with -lm 14 years ago
tools flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. 14 years ago
.gitignore .gitignore: ignore vim swap files 15 years ago
BSDmakefile add missing copyright header 18 years ago
Config.in select LZMA compressed initramfs by default for ramips 14 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 15 years ago
README remove bison requirement (see [10398] & [14900]) 14 years ago
feeds.conf.default add a src-link example to feeds.conf.default 15 years ago
rules.mk fix path to libgcc.a in LIBGCC_S 14 years ago

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org