You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
c8115167f9
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN: 1x Reset
LED: 1x LED blue
1x LED red
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad)
Header is located next to reset-button
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: David Bauer <mail@david-bauer.net>
|
6 years ago | |
|---|---|---|
| .. | ||
| lzma-loader | 6 years ago | |
| Makefile | 6 years ago | |
| common-buffalo.mk | 6 years ago | |
| common-netgear.mk | 6 years ago | |
| common-tp-link.mk | 6 years ago | |
| generic-tp-link.mk | 6 years ago | |
| generic-ubnt.mk | 6 years ago | |
| generic.mk | 6 years ago | |
| nand.mk | 6 years ago | |
| tiny-netgear.mk | 6 years ago | |
| tiny-tp-link.mk | 6 years ago | |
| tiny.mk | 6 years ago | |