You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Michal Cieslakiewicz 9b6f89c37f ath79: add support for Netgear WNDR4300
This patch adds ath79 support for Netgear WNDR4300.
Router was previously supported by ar71xx target only.
Note: device requires 'ar934x-nand' driver in kernel.

Specification
=============
  * Description: Netgear WNDR4300
  * Loader: U-boot
  * SOC: Atheros AR9344 (560 MHz)
  * RAM: 128 MiB
  * Flash: 128 MiB (NAND)
	- U-boot binary: 256 KiB
	- U-boot environment: 256 KiB
	- ART: 256 KiB
	- POT: 512 KiB
	- Language: 2 MiB
	- Config: 512 KiB
	- Traffic Meter: 3 MiB
	- Firmware: 25 MiB
	- ART Backup: 256 KiB
	- Reserved: 96 MiB
  * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327)
  * Wireless:
	- 2.4 GHz b/g/n (internal)
	- 5 GHz a/n (AR9580)
  * USB: yes, 1 x USB 2.0
  * Buttons:
	- Reset
	- WiFi (rfkill)
	- WPS
  * LEDs:
	- Power (amber/green)
	- WAN (amber/green)
	- WLAN 2G (green)
	- WLAN 5G (blue)
	- 4 x LAN (amber/green)
	- USB (green)
	- WPS (amber/green)
  * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1
  * Power supply: DC 12V 2.5A
  * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2

Installation
============
  * TFTP recovery
  * TFTP via U-boot prompt
  * sysupgrade
  * Web interface

Note about partitioning: firmware partition offset (0x6c0000) is
hardcoded into vendor's u-boot, so this partition cannot be moved
and resized to include Netgear-specific flash areas (pot, language,
config, traffic_meter) not used by OpenWrt.

Test build configuration
========================
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_nand=y
CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300=y
CONFIG_ALL_KMODS=y
CONFIG_DEVEL=y
CONFIG_CCACHE=y
CONFIG_COLLECT_KERNEL_DEBUG=y
CONFIG_IMAGEOPT=y

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
5 years ago
..
apm821xx apm821xx: add support for the Netgear WNDAP620 and WNDAP660 6 years ago
ar71xx uboot-envtools: Add domywifi dw33d support 6 years ago
ath79 ath79: add support for Netgear WNDR4300 5 years ago
cns3xxx treewide: use the generic board_name function 7 years ago
imx6 uboot-envtools: remove erasesize from MMC config 5 years ago
ipq40xx ipq40xx: Add support for Linksys EA8300 (Dallas) 5 years ago
ipq806x uboot-envtools: adds r7800 uboot env support 6 years ago
kirkwood kirkwood: add support for Iomega Storcenter ix2-200 6 years ago
lantiq lantiq: use the compatible string as board name 7 years ago
layerscape uboot-envtools: add configuration for Traverse LS1043 boards. 6 years ago
mpc85xx mpc85xx: add support for OCEDO Panda 5 years ago
mvebu mvebu: uDPU: add sysupgrade support 5 years ago
mxs uboot-envtools: fix configuration for I2SE Duckbills 6 years ago
oxnas uboot-envtools: fix fw_env.config for ox820/stg-212 5 years ago
pistachio pistachio: remove custom board detection override 7 years ago
ramips uboot-envtools: Apply ramips device renames 5 years ago
uboot-envtools.sh move boot related packages to their own folder 12 years ago