You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Santiago Rodriguez-Papa ed087cba8a ramips: add support for Linksys EA7300 v1
Specifications:

* SoC:      MediaTek MT7621A              (880 MHz 2c/4t)
* RAM:      Nanya NT5CC128M16IP-DIT       (256M DDR3-1600)
* Flash:    Macronix MX30LF1G18AC-TI      (128M NAND)
* Eth:      MediaTek MT7621A              (10/100/1000 Mbps x5)
* Radio:    MT7615N                       (2.4 GHz & 5 GHz)
            4 antennae: 1 internal and 3 non-deatachable
* USB:      3.0 (x1)
* LEDs:
    White   (x1 logo)
    Green   (x6 eth + wps)
    Orange  (x5, hardware-bound)
* Buttons:
    Reset   (x1)
    WPS     (x1)

Everything works! Been running it for a couple weeks now and haven't had
any problems. Please let me know if you run into any.

Installation:

Flash factory image through GUI.

This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.

Reverting to factory firmware:

Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.

Signed-off-by: Santiago Rodriguez-Papa <contact@rodsan.dev>
[use v1 only, minor DTS adjustments, use LINKSYS_HWNAME and add it to
DEVICE_VARS, wrap DEVICE_PACKAGES, adjust commit message/title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
..
apm821xx apm821xx: add support for the Netgear WNDAP620 and WNDAP660 6 years ago
ar71xx uboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifi 4 years ago
ath79 uboot-envtools: ath79: update ubootenv partion index for gl-ar300m 4 years ago
cns3xxx treewide: use the generic board_name function 7 years ago
imx6 uboot-envtools: remove erasesize from MMC config 5 years ago
ipq40xx ipq40xx: add support for Buffalo WTR-M2133HP 4 years ago
ipq806x ipq806x: add support for Linksys EA7500 V1 4 years ago
kirkwood kirkwood: add support for Check Point L-50 4 years ago
lantiq lantiq: use the compatible string as board name 7 years ago
layerscape uboot-envtools: add configuration for Traverse LS1043 boards. 6 years ago
mpc85xx mpc85xx: add support for OCEDO Panda 5 years ago
mvebu mvebu: add support for MACCHIATObin Single Shot 4 years ago
mxs uboot-envtools: mxs: add support for olimex, imx23-olinuxino 4 years ago
oxnas uboot-envtools: fix fw_env.config for ox820/stg-212 5 years ago
pistachio pistachio: remove custom board detection override 7 years ago
ramips ramips: add support for Linksys EA7300 v1 4 years ago
uboot-envtools.sh uboot-envtools: check for config prior to append 5 years ago