You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/package/boot
David Bauer e36f8b3f39 ar71xx: add support for OCEDO Koala
This commit adds support for the OCEDO Koala

SOC:	Qualcomm QCA9558 (Scorpion)
RAM:    128MB
FLASH:  16MiB
WLAN1:  QCA9558 2.4 GHz 802.11bgn 3x3
WLAN2:  QCA9880 5 GHz 802.11nac 3x3
INPUT:  RESET button
LED:    Power, LAN, WiFi 2.4, WiFi 5, SYS
Serial: Header Next to Black metal shield
        Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
        The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet
 - 2.4 GHz WiFi
 - 5 GHz WiFi
 - TFTP boot from ramdisk image
 - Installation via ramdisk image
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Installation seems to be possible only through booting an OpenWRT
ramdisk image.

Hold down the reset button while powering on the device. It will load a
ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8.

Note: depending on the present software, the device might also try to
pull a file called 'koala-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.

Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.

Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with

 > fw_setenv bootcmd run bootcmd_1

Afterwards you can reboot the device.

Signed-off-by: David Bauer <mail@david-bauer.net>
6 years ago
..
apex ixp4xx: put apex images into image staging directory 7 years ago
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: use release build and bump version 6 years ago
at91bootstrap at91: Add SAMA5D2 PTC EK board 6 years ago
fconfig treewide: clean up download hashes 8 years ago
grub2 grub2: disable building platform code for target utility 6 years ago
imx-bootlets treewide: clean up download hashes 8 years ago
kexec-tools kexec-tools: bump version to 2.0.16 6 years ago
kobs-ng kobs-ng: add header for integer definitions 7 years ago
rbcfg rbcfg: Implement CPU frequency control 7 years ago
uboot-ar71xx uboot-ar71xx: fix build error 7 years ago
uboot-at91 at91: Add SAMA5D2 PTC EK board 6 years ago
uboot-envtools ar71xx: add support for OCEDO Koala 6 years ago
uboot-fritz4040 ipq40xx: add target 6 years ago
uboot-imx6 uboot-imx6: fix build with GCC 7 6 years ago
uboot-kirkwood uboot-kirkwood: update to 2018.03 6 years ago
uboot-lantiq lantiq: rename gphy firmware 6 years ago
uboot-layerscape layerscape: support ubifs rootfs in u-boot env 6 years ago
uboot-layerscape-armv8_32b layerscape: support ubifs rootfs in u-boot env 6 years ago
uboot-mvebu uboot-mvebu: fix build on hosts lacking pkg-config 6 years ago
uboot-mxs uboot-mxs: fix build on hosts lacking pkg-config 6 years ago
uboot-omap packages/uboot-omap: bugfix: serial using ns16550 fifo not enabled 6 years ago
uboot-oxnas oxnas: bring in new oxnas target 6 years ago
uboot-sunxi sunxi: add build for sopine 6 years ago
uboot-xburst treewide: clean up download hashes 8 years ago
uboot-zynq uboot-zynq: update to 2017.03 6 years ago
yamonenv packages: mark packages depending on a target as nonshared 7 years ago