openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Nicolas Thill 0aeed7e525 getver: don't use "-r COMMITTED" arg which needs network access to the repository, use the "Last Changed Rev:" line instead SVN-Revision: 17864		15 years ago
docs	Add documentation for passphrase option.	15 years ago
include	adjust pointer size from 4 to 8 bytes in x86_64 site config	15 years ago
package	gdb: have both gdb & gdbserver share defaults	15 years ago
scripts	getver: don't use "-r COMMITTED" arg which needs network access to the repository, use the "Last Changed Rev:" line instead	15 years ago
target	ramips: remove unneccesary ifdefs from the rt288x pci code	15 years ago
toolchain	dump 2.6.25 support	15 years ago
tools	gmp: upgrade to 4.3.1 and fix compile on 64-bit mac os x	15 years ago
.gitignore	add logs/ to .gitignore	15 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	add external toolchain support, enhance native toolchain support (special thanks to Luigi Mantellini for his help... and patience ;)	15 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	15 years ago
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	16 years ago
feeds.conf.default	switch to LuCI 0.9.x branch	15 years ago
rules.mk	add external toolchain support, enhance native toolchain support (special thanks to Luigi Mantellini for his help... and patience ;)	15 years ago

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org