You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
69 lines
2.5 KiB
Diff
69 lines
2.5 KiB
Diff
From: Sven Eckelmann <sven.eckelmann@openmesh.com>
|
|
Date: Thu, 11 May 2017 08:21:45 +0200
|
|
Subject: [PATCH] set mcast_rate in mesh mode
|
|
|
|
The wpa_supplicant code for IBSS allows to set the mcast rate. It is
|
|
recommended to increase this value from 1 or 6 Mbit/s to something higher
|
|
when using a mesh protocol on top which uses the multicast packet loss as
|
|
indicator for the link quality.
|
|
|
|
This setting was unfortunately not applied for mesh mode. But it would be
|
|
beneficial when wpa_supplicant would behave similar to IBSS mode and set
|
|
this argument during mesh join like authsae already does. At least it is
|
|
helpful for companies/projects which are currently switching to 802.11s
|
|
(without mesh_fwding and with mesh_ttl set to 1) as replacement for IBSS
|
|
because newer drivers seem to support 802.11s but not IBSS anymore.
|
|
|
|
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
|
|
Tested-by: Simon Wunderlich <simon.wunderlich@openmesh.com>
|
|
|
|
--- a/src/drivers/driver.h
|
|
+++ b/src/drivers/driver.h
|
|
@@ -1546,6 +1546,7 @@ struct wpa_driver_mesh_join_params {
|
|
#define WPA_DRIVER_MESH_FLAG_SAE_AUTH 0x00000004
|
|
#define WPA_DRIVER_MESH_FLAG_AMPE 0x00000008
|
|
unsigned int flags;
|
|
+ int mcast_rate;
|
|
};
|
|
|
|
struct wpa_driver_set_key_params {
|
|
--- a/src/drivers/driver_nl80211.c
|
|
+++ b/src/drivers/driver_nl80211.c
|
|
@@ -9959,6 +9959,18 @@ static int nl80211_put_mesh_id(struct nl
|
|
}
|
|
|
|
|
|
+static int nl80211_put_mcast_rate(struct nl_msg *msg, int mcast_rate)
|
|
+{
|
|
+ if (mcast_rate > 0) {
|
|
+ wpa_printf(MSG_DEBUG, " * mcast_rate=%.1f",
|
|
+ (double)mcast_rate / 10);
|
|
+ return nla_put_u32(msg, NL80211_ATTR_MCAST_RATE, mcast_rate);
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
static int nl80211_put_mesh_config(struct nl_msg *msg,
|
|
struct wpa_driver_mesh_bss_params *params)
|
|
{
|
|
@@ -10017,6 +10029,7 @@ static int nl80211_join_mesh(struct i802
|
|
nl80211_put_basic_rates(msg, params->basic_rates) ||
|
|
nl80211_put_mesh_id(msg, params->meshid, params->meshid_len) ||
|
|
nl80211_put_beacon_int(msg, params->beacon_int) ||
|
|
+ nl80211_put_mcast_rate(msg, params->mcast_rate) ||
|
|
nl80211_put_dtim_period(msg, params->dtim_period))
|
|
goto fail;
|
|
|
|
--- a/wpa_supplicant/mesh.c
|
|
+++ b/wpa_supplicant/mesh.c
|
|
@@ -460,6 +460,7 @@ int wpa_supplicant_join_mesh(struct wpa_
|
|
|
|
params->meshid = ssid->ssid;
|
|
params->meshid_len = ssid->ssid_len;
|
|
+ params->mcast_rate = ssid->mcast_rate;
|
|
ibss_mesh_setup_freq(wpa_s, ssid, ¶ms->freq);
|
|
wpa_s->mesh_ht_enabled = !!params->freq.ht_enabled;
|
|
wpa_s->mesh_vht_enabled = !!params->freq.vht_enabled;
|