You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
6256ca3232
This patch adds support for the 8devices Habanero development board. Specs are: CPU: QCA IPQ4019 RAM: DDR3L 512MB Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it and some without) WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2 WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2 Ethernet: 5x Gbit LAN (QCA 8075) USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019) MicroSD slot (Uses SD controller built into IPQ4019) SDIO3.0/EMMC slot (Uses the same SD controller) Mini PCI-E Gen 2.0 slot (Built into IPQ4019) 5x LEDs (4 GPIO controllable) 2x Pushbutton (1 is connected to GPIO, other to SoC reset) LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no driver support) 1x UART 115200 rate on J18 2x breakout development headers 12V DC Jack for power DIP switch for bootstrap configuration Installation instructions: Since boards ship with vendors fork of OpenWrt sysupgrade can be used. Signed-off-by: Robert Marko <robimarko@gmail.com> |
4 years ago | |
|---|---|---|
| .. | ||
| Makefile | 4 years ago | |
| board-8dev_habanero-dvk.qca4019 | 4 years ago | |
| board-aruba_ap-303.qca4019 | 4 years ago | |
| board-avm_fritzrepeater-1200.qca4019 | 5 years ago | |
| board-dlink_dap2610.qca4019 | 4 years ago | |
| board-engenius_eap2200.qca4019 | 4 years ago | |
| board-engenius_eap2200.qca9888 | 4 years ago | |
| board-engenius_emd1.qca4019 | 4 years ago | |
| board-ezviz_cs-w3-wd1200g-eup.qca4019 | 4 years ago | |
| board-linksys_ea8300.qca4019 | 5 years ago | |
| board-linksys_ea8300.qca9888 | 5 years ago | |
| board-qxwlan_e2600ac.qca4019 | 4 years ago | |