You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ath79/dts/qca9531_comfast_cf-e5.dts

145 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca953x.dtsi"
/ {
compatible = "comfast,cf-e5", "qca,qca9531";
model = "COMFAST CF-E5/E7";
aliases {
label-mac-device = &eth0;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
wan {
label = "cf-e5:blue:wan";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
lan {
label = "cf-e5:blue:lan";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
wlan {
label = "cf-e5:blue:wlan";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
rssi0 {
label = "cf-e5:blue:rssi0";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
rssi1 {
label = "cf-e5:blue:rssi1";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
rssi2 {
label = "cf-e5:blue:rssi2";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
};
&uart {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x010000>;
read-only;
};
art: partition@10000 {
label = "art";
reg = <0x010000 0x010000>;
read-only;
};
partition@20000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x020000 0xfd0000>;
};
partition@ff0000 {
label = "art-backup";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&art 0x0>;
phy-handle = <&swphy4>;
};
&eth1 {
mtd-mac-address = <&art 0x6>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
};
&pinmux {
led_wan_pin: pinmux_led_wan_pin {
pinctrl-single,bits = <0x4 0x0 0xff>;
};
};