You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target
Leon M. George 377e8942b2 ipq40xx: add cpximg to flash Compex WPJ428 via bootloader
Generate a cpximg that is compatible with the cpximg loader in Compex' u-boot.
The cpximg loader can be started either by holding the reset button during power
up or by entering the u-boot prompt and entering 'cpximg'.
Once it's running, a TFTP-server under 192.168.1.1 will accept an image
appropriate for the board revision that is etched on the board (e.g. 6A04).

The image can be pushed using tftp:
  tftp -v -m binary 192.168.1.1 -c put openwrt-ipq40xx-generic-compex_wpj428-squashfs-cpximg-6a04.bin

cpximg files can also be used with the sysupgrade utility in stock images.
(add SSH key in luci for root access)

In mkmylofw_32m, the calculation of the "partition size" has been preferred
to just padding the partition as this will result in less block transfers
during flashing (while the additional complexity is bearable).

Signed-off-by: Leon M. George <leon@georgemail.eu>
Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
..
imagebuilder target/imagebuilder: use multi-thread support for xz compression 5 years ago
linux ipq40xx: add cpximg to flash Compex WPJ428 via bootloader 4 years ago
sdk sdk: use bundle-libraries.sh to ship kernel objtool tools 5 years ago
toolchain toolchain: wrapper.sh: harmonize leading whitespaces 5 years ago
Config.in build: add a config option for enabling a testing version of the target kernel 5 years ago
Makefile build: make <subdir>/install opt-in, use it for target/ only 7 years ago