You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/bcm27xx/patches-4.19/950-0801-mmc-sdhci-iproc-Fi...

47 lines
1.7 KiB
Diff

From 5ee0de9d7abd644d4cb678fe26ac5130a1a8075f Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Fri, 2 Aug 2019 15:20:11 +0100
Subject: [PATCH] mmc: sdhci-iproc: Fix vmmc regulators on iProc
The Linux support for controlling card power via regulators appears to
be contentious. I would argue that the default behaviour is contrary to
the SDHCI spec - turning off the power writes a reserved value to the
SD Bus Voltage Select field of the Power Control Register, which
seems to kill the Arasan/iProc controller - but fortunately there is a
hook in sdhci_ops to override the behaviour. Borrow the implementation
from sdhci_arasan_set_power.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
---
drivers/mmc/host/sdhci-iproc.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -162,6 +162,17 @@ static void sdhci_iproc_writeb(struct sd
sdhci_iproc_writel(host, newval, reg & ~3);
}
+static void sdhci_iproc_set_power(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd)
+{
+ if (!IS_ERR(host->mmc->supply.vmmc)) {
+ struct mmc_host *mmc = host->mmc;
+
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ }
+ sdhci_set_power_noreg(host, mode, vdd);
+}
+
static const struct sdhci_ops sdhci_iproc_ops = {
.set_clock = sdhci_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
@@ -178,6 +189,7 @@ static const struct sdhci_ops sdhci_ipro
.write_w = sdhci_iproc_writew,
.write_b = sdhci_iproc_writeb,
.set_clock = sdhci_set_clock,
+ .set_power = sdhci_iproc_set_power,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,