You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/layerscape/patches-5.4/701-net-0368-Revert-net-dsa...

441 lines
13 KiB
Diff

From 9ee918eb911853c7b46cd84779d857988366e845 Mon Sep 17 00:00:00 2001
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Mon, 6 Jan 2020 14:30:24 +0200
Subject: [PATCH] Revert "net: dsa: felix: Add PCS operations for PHYLINK"
This reverts commit 1082a3ef9e832cc52c4b0053c7c52453376f4830.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
drivers/net/dsa/ocelot/felix.c | 23 +--
drivers/net/dsa/ocelot/felix.h | 7 +-
drivers/net/dsa/ocelot/felix_vsc9959.c | 292 +--------------------------------
3 files changed, 8 insertions(+), 314 deletions(-)
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -265,7 +265,7 @@ static int felix_get_ts_info(struct dsa_
static int felix_init_structs(struct felix *felix, int num_phys_ports)
{
struct ocelot *ocelot = &felix->ocelot;
- resource_size_t switch_base;
+ resource_size_t base;
int port, i, err;
ocelot->num_phys_ports = num_phys_ports;
@@ -281,8 +281,7 @@ static int felix_init_structs(struct fel
ocelot->ops = felix->info->ops;
ocelot->quirks = felix->info->quirks;
- switch_base = pci_resource_start(felix->pdev,
- felix->info->switch_pci_bar);
+ base = pci_resource_start(felix->pdev, felix->info->pci_bar);
for (i = 0; i < TARGET_MAX; i++) {
struct regmap *target;
@@ -293,8 +292,8 @@ static int felix_init_structs(struct fel
res = &felix->info->target_io_res[i];
res->flags = IORESOURCE_MEM;
- res->start += switch_base;
- res->end += switch_base;
+ res->start += base;
+ res->end += base;
target = ocelot_regmap_init(ocelot, res);
if (IS_ERR(target)) {
@@ -328,8 +327,8 @@ static int felix_init_structs(struct fel
res = &felix->info->port_io_res[port];
res->flags = IORESOURCE_MEM;
- res->start += switch_base;
- res->end += switch_base;
+ res->start += base;
+ res->end += base;
port_regs = devm_ioremap_resource(ocelot->dev, res);
if (IS_ERR(port_regs)) {
@@ -343,12 +342,6 @@ static int felix_init_structs(struct fel
ocelot->ports[port] = ocelot_port;
}
- if (felix->info->mdio_bus_alloc) {
- err = felix->info->mdio_bus_alloc(ocelot);
- if (err < 0)
- return err;
- }
-
return 0;
}
@@ -384,10 +377,6 @@ static int felix_setup(struct dsa_switch
static void felix_teardown(struct dsa_switch *ds)
{
struct ocelot *ocelot = ds->priv;
- struct felix *felix = ocelot_to_felix(ocelot);
-
- if (felix->imdio)
- mdiobus_unregister(felix->imdio);
/* stop workqueue thread */
ocelot_deinit(ocelot);
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -10,7 +10,6 @@
struct felix_info {
struct resource *target_io_res;
struct resource *port_io_res;
- struct resource *imdio_res;
const struct reg_field *regfields;
const u32 *const *map;
const struct ocelot_ops *ops;
@@ -18,10 +17,8 @@ struct felix_info {
const struct ocelot_stat_layout *stats_layout;
unsigned int num_stats;
int num_ports;
- int switch_pci_bar;
- int imdio_pci_bar;
+ int pci_bar;
unsigned long quirks;
- int (*mdio_bus_alloc)(struct ocelot *ocelot);
};
extern struct felix_info felix_info_vsc9959;
@@ -36,8 +33,6 @@ struct felix {
struct pci_dev *pdev;
struct felix_info *info;
struct ocelot ocelot;
- struct mii_bus *imdio;
- struct phy_device **pcs;
};
#endif
--- a/drivers/net/dsa/ocelot/felix_vsc9959.c
+++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
@@ -2,7 +2,6 @@
/* Copyright 2017 Microsemi Corporation
* Copyright 2018-2019 NXP Semiconductors
*/
-#include <linux/fsl/enetc_mdio.h>
#include <soc/mscc/ocelot_sys.h>
#include <soc/mscc/ocelot.h>
#include <linux/iopoll.h>
@@ -391,15 +390,6 @@ static struct resource vsc9959_port_io_r
},
};
-/* Port MAC 0 Internal MDIO bus through which the SerDes acting as an
- * SGMII/QSGMII MAC PCS can be found.
- */
-static struct resource vsc9959_imdio_res = {
- .start = 0x8030,
- .end = 0x8040,
- .name = "imdio",
-};
-
static const struct reg_field vsc9959_regfields[] = {
[ANA_ADVLEARN_VLAN_CHK] = REG_FIELD(ANA_ADVLEARN, 6, 6),
[ANA_ADVLEARN_LEARN_MIRROR] = REG_FIELD(ANA_ADVLEARN, 0, 5),
@@ -579,291 +569,13 @@ static int vsc9959_reset(struct ocelot *
return 0;
}
-void vsc9959_pcs_validate(struct ocelot *ocelot, int port,
- unsigned long *supported,
- struct phylink_link_state *state)
-{
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
- if (state->interface != PHY_INTERFACE_MODE_NA &&
- state->interface != PHY_INTERFACE_MODE_GMII &&
- state->interface != PHY_INTERFACE_MODE_SGMII &&
- state->interface != PHY_INTERFACE_MODE_QSGMII &&
- state->interface != PHY_INTERFACE_MODE_USXGMII) {
- bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
- return;
- }
-
- /* No half-duplex. */
- phylink_set_port_modes(mask);
- phylink_set(mask, Autoneg);
- phylink_set(mask, Pause);
- phylink_set(mask, Asym_Pause);
- phylink_set(mask, 10baseT_Full);
- phylink_set(mask, 100baseT_Full);
- phylink_set(mask, 1000baseT_Full);
- phylink_set(mask, 1000baseX_Full);
- phylink_set(mask, 2500baseT_Full);
- phylink_set(mask, 2500baseX_Full);
- phylink_set(mask, 1000baseKX_Full);
-
- bitmap_and(supported, supported, mask,
- __ETHTOOL_LINK_MODE_MASK_NBITS);
- bitmap_and(state->advertising, state->advertising, mask,
- __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static void vsc9959_pcs_an_restart(struct ocelot *ocelot, int port)
-{
- struct felix *felix = ocelot_to_felix(ocelot);
- struct phy_device *pcs = felix->pcs[port];
-
- if (!pcs)
- return;
-
- phy_set_bits(pcs, MII_BMCR, BMCR_ANRESTART);
-}
-
-static void vsc9959_pcs_init_sgmii(struct phy_device *pcs,
- unsigned int link_an_mode,
- const struct phylink_link_state *state)
-{
- /* SGMII spec requires tx_config_Reg[15:0] to be exactly 0x4001
- * for the MAC PCS in order to acknowledge the AN.
- */
- phy_write(pcs, MII_ADVERTISE, ADVERTISE_SGMII | ADVERTISE_LPACK);
-
- /* Set to SGMII mode, use AN */
- phy_write(pcs, ENETC_PCS_IF_MODE, ENETC_PCS_IF_MODE_SGMII_AN);
-
- /* Adjust link timer for SGMII */
- phy_write(pcs, ENETC_PCS_LINK_TIMER1, ENETC_PCS_LINK_TIMER1_VAL);
- phy_write(pcs, ENETC_PCS_LINK_TIMER2, ENETC_PCS_LINK_TIMER2_VAL);
-
- phy_write(pcs, MII_BMCR, BMCR_SPEED1000 |
- BMCR_FULLDPLX |
- BMCR_ANENABLE);
-}
-
-#define ADVERTISE_USXGMII_FDX BIT(12)
-
-static void vsc9959_pcs_init_sxgmii(struct phy_device *pcs,
- unsigned int link_an_mode,
- const struct phylink_link_state *state)
-{
- /* Configure device ability for the USXGMII Replicator */
- phy_write_mmd(pcs, MDIO_MMD_VEND2, MII_ADVERTISE,
- ADVERTISE_SGMII |
- ADVERTISE_LPACK |
- ADVERTISE_USXGMII_FDX);
-}
-
-static void vsc9959_pcs_init(struct ocelot *ocelot, int port,
- unsigned int link_an_mode,
- const struct phylink_link_state *state)
-{
- struct felix *felix = ocelot_to_felix(ocelot);
- struct phy_device *pcs = felix->pcs[port];
-
- if (!pcs)
- return;
-
- if (link_an_mode == MLO_AN_FIXED) {
- phydev_err(pcs, "Fixed modes are not yet supported.\n");
- return;
- }
-
- pcs->interface = state->interface;
- if (pcs->interface == PHY_INTERFACE_MODE_USXGMII)
- pcs->is_c45 = true;
- else
- pcs->is_c45 = false;
-
- /* The PCS does not implement the BMSR register fully, so capability
- * detection via genphy_read_abilities does not work. Since we can get
- * the PHY config word from the LPA register though, there is still
- * value in using the generic phy_resolve_aneg_linkmode function. So
- * populate the supported and advertising link modes manually here.
- */
- linkmode_set_bit_array(phy_basic_ports_array,
- ARRAY_SIZE(phy_basic_ports_array),
- pcs->supported);
- linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, pcs->supported);
- linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, pcs->supported);
- linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, pcs->supported);
- linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, pcs->supported);
- phy_advertise_supported(pcs);
-
- switch (pcs->interface) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_QSGMII:
- vsc9959_pcs_init_sgmii(pcs, link_an_mode, state);
- break;
- case PHY_INTERFACE_MODE_USXGMII:
- vsc9959_pcs_init_sxgmii(pcs, link_an_mode, state);
- break;
- default:
- dev_err(ocelot->dev, "Unsupported link mode %s\n",
- phy_modes(pcs->interface));
- }
-}
-
-static void vsc9959_pcs_link_state(struct ocelot *ocelot, int port,
- struct phylink_link_state *state)
-{
- struct felix *felix = ocelot_to_felix(ocelot);
- struct phy_device *pcs = felix->pcs[port];
- int err;
-
- if (!pcs)
- return;
-
- /* Reading PCS status not yet supported for USXGMII */
- if (pcs->is_c45) {
- state->link = 1;
- return;
- }
-
- pcs->speed = SPEED_UNKNOWN;
- pcs->duplex = DUPLEX_UNKNOWN;
- pcs->pause = 0;
- pcs->asym_pause = 0;
-
- err = genphy_update_link(pcs);
- if (err < 0)
- return;
-
- if (pcs->autoneg_complete) {
- u16 lpa = phy_read(pcs, MII_LPA);
-
- switch (state->interface) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_QSGMII:
- mii_lpa_to_linkmode_lpa_sgmii(pcs->lp_advertising, lpa);
- break;
- default:
- return;
- }
-
- phy_resolve_aneg_linkmode(pcs);
- }
-
- state->an_complete = pcs->autoneg_complete;
- state->an_enabled = pcs->autoneg;
- state->link = pcs->link;
- state->duplex = pcs->duplex;
- state->speed = pcs->speed;
- /* SGMII AN does not negotiate flow control, but that's ok,
- * since phylink already knows that, and does:
- * link_state.pause |= pl->phy_state.pause;
- */
- state->pause = pcs->pause;
-
- dev_dbg(ocelot->dev,
- "%s: mode=%s/%s/%s adv=%*pb lpa=%*pb link=%u an_enabled=%u an_complete=%u\n",
- __func__,
- phy_modes(state->interface),
- phy_speed_to_str(state->speed),
- phy_duplex_to_str(state->duplex),
- __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
- __ETHTOOL_LINK_MODE_MASK_NBITS, state->lp_advertising,
- state->link, state->an_enabled, state->an_complete);
-}
-
static const struct ocelot_ops vsc9959_ops = {
.reset = vsc9959_reset,
- .pcs_init = vsc9959_pcs_init,
- .pcs_an_restart = vsc9959_pcs_an_restart,
- .pcs_link_state = vsc9959_pcs_link_state,
- .pcs_validate = vsc9959_pcs_validate,
};
-static int vsc9959_mdio_bus_alloc(struct ocelot *ocelot)
-{
- struct felix *felix = ocelot_to_felix(ocelot);
- struct enetc_mdio_priv *mdio_priv;
- struct device *dev = ocelot->dev;
- resource_size_t imdio_base;
- void __iomem *imdio_regs;
- struct resource *res;
- struct enetc_hw *hw;
- struct mii_bus *bus;
- int port;
- int rc;
-
- felix->pcs = devm_kcalloc(dev, felix->info->num_ports,
- sizeof(struct phy_device),
- GFP_KERNEL);
- if (!felix->pcs) {
- dev_err(dev, "failed to allocate array for PCS PHYs\n");
- return -ENOMEM;
- }
-
- imdio_base = pci_resource_start(felix->pdev,
- felix->info->imdio_pci_bar);
-
- res = felix->info->imdio_res;
- res->flags = IORESOURCE_MEM;
- res->start += imdio_base;
- res->end += imdio_base;
-
- imdio_regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(imdio_regs)) {
- dev_err(dev, "failed to map internal MDIO registers\n");
- return PTR_ERR(imdio_regs);
- }
-
- hw = enetc_hw_alloc(dev, imdio_regs);
- if (IS_ERR(hw)) {
- dev_err(dev, "failed to allocate ENETC HW structure\n");
- return PTR_ERR(hw);
- }
-
- bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
- if (!bus)
- return -ENOMEM;
-
- bus->name = "VSC9959 internal MDIO bus";
- bus->read = enetc_mdio_read;
- bus->write = enetc_mdio_write;
- bus->parent = dev;
- mdio_priv = bus->priv;
- mdio_priv->hw = hw;
- /* This gets added to imdio_regs, which already maps addresses
- * starting with the proper offset.
- */
- mdio_priv->mdio_base = 0;
- snprintf(bus->id, MII_BUS_ID_SIZE, "%s-imdio", dev_name(dev));
-
- /* Needed in order to initialize the bus mutex lock */
- rc = mdiobus_register(bus);
- if (rc < 0) {
- dev_err(dev, "failed to register MDIO bus\n");
- return rc;
- }
-
- felix->imdio = bus;
-
- for (port = 0; port < felix->info->num_ports; port++) {
- struct phy_device *pcs;
- bool is_c45 = false;
-
- pcs = get_phy_device(felix->imdio, port, is_c45);
- if (IS_ERR(pcs))
- continue;
-
- felix->pcs[port] = pcs;
-
- dev_info(dev, "Found PCS at internal MDIO address %d\n", port);
- }
-
- return 0;
-}
-
struct felix_info felix_info_vsc9959 = {
.target_io_res = vsc9959_target_io_res,
.port_io_res = vsc9959_port_io_res,
- .imdio_res = &vsc9959_imdio_res,
.regfields = vsc9959_regfields,
.map = vsc9959_regmap,
.ops = &vsc9959_ops,
@@ -871,8 +583,6 @@ struct felix_info felix_info_vsc9959 = {
.num_stats = ARRAY_SIZE(vsc9959_stats_layout),
.shared_queue_sz = 128 * 1024,
.num_ports = 6,
- .switch_pci_bar = 4,
- .imdio_pci_bar = 0,
+ .pci_bar = 4,
.quirks = OCELOT_PCS_PERFORMS_RATE_ADAPTATION,
- .mdio_bus_alloc = vsc9959_mdio_bus_alloc,
};