Index: linux-3.18.5/drivers/gpio/Kconfig =================================================================== --- linux-3.18.5.orig/drivers/gpio/Kconfig 2015-01-30 02:41:03.000000000 +0100 +++ linux-3.18.5/drivers/gpio/Kconfig 2015-02-09 13:55:16.942041668 +0100 @@ -794,6 +794,14 @@ Support for the RDC R321x SoC GPIOs over southbridge PCI configuration space. +config GPIO_GW_I2C_PLD + tristate "Gateworks I2C PLD GPIO Expander" + depends on I2C + help + Say yes here to provide access to the Gateworks I2C PLD GPIO + Expander. This is used at least on the GW2358-4. + + comment "SPI GPIO expanders:" config GPIO_MAX7301 Index: linux-3.18.5/drivers/gpio/Makefile =================================================================== --- linux-3.18.5.orig/drivers/gpio/Makefile 2015-01-30 02:41:03.000000000 +0100 +++ linux-3.18.5/drivers/gpio/Makefile 2015-02-09 13:56:05.990145732 +0100 @@ -106,3 +106,4 @@ obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o +obj-$(CONFIG_GPIO_GW_I2C_PLD) += gw_i2c_pld.o Index: linux-3.18.5/drivers/gpio/gw_i2c_pld.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-3.18.5/drivers/gpio/gw_i2c_pld.c 2015-02-09 14:02:00.146895858 +0100 @@ -0,0 +1,371 @@ +/* + * Gateworks I2C PLD GPIO expander + * + * Copyright (C) 2009 Gateworks Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct i2c_device_id gw_i2c_pld_id[] = { + { "gw_i2c_pld", 8 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id); + +/* + * The Gateworks I2C PLD chip only expose one read and one + * write register. Writing a "one" bit (to match the reset state) lets + * that pin be used as an input. It is an open-drain model. + */ + +struct gw_i2c_pld { + struct gpio_chip chip; + struct i2c_client *client; + unsigned out; /* software latch */ +}; + +/*-------------------------------------------------------------------------*/ + +/* + * The Gateworks I2C PLD chip does not properly send the acknowledge bit + * thus we cannot use standard i2c_smbus functions. We have recreated + * our own here, but we still use the rt_mutex_lock to lock the i2c_bus + * as the device still exists on the I2C bus. +*/ + +#define PLD_SCL_GPIO 6 +#define PLD_SDA_GPIO 7 + +#define SCL_LO() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW) +#define SCL_HI() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH) +#define SCL_EN() gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT) +#define SDA_LO() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW) +#define SDA_HI() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH) +#define SDA_EN() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT) +#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN) +#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x); + +static int i2c_pld_write_byte(int address, int byte) +{ + int i; + + address = (address << 1) & ~0x1; + + SDA_HI(); + SDA_EN(); + SCL_EN(); + SCL_HI(); + SDA_LO(); + SCL_LO(); + + for (i = 7; i >= 0; i--) + { + if (address & (1 << i)) + SDA_HI(); + else + SDA_LO(); + + SCL_HI(); + SCL_LO(); + } + + SDA_DIS(); + SCL_HI(); + SDA_IN(i); + SCL_LO(); + SDA_EN(); + + for (i = 7; i >= 0; i--) + { + if (byte & (1 << i)) + SDA_HI(); + else + SDA_LO(); + SCL_HI(); + SCL_LO(); + } + + SDA_DIS(); + SCL_HI(); + SDA_IN(i); + SCL_LO(); + + SDA_HI(); + SDA_EN(); + + SDA_LO(); + SCL_HI(); + SDA_HI(); + SCL_LO(); + SCL_HI(); + + return 0; +} + +static unsigned int i2c_pld_read_byte(int address) +{ + int i = 0, byte = 0; + int bit; + + address = (address << 1) | 0x1; + + SDA_HI(); + SDA_EN(); + SCL_EN(); + SCL_HI(); + SDA_LO(); + SCL_LO(); + + for (i = 7; i >= 0; i--) + { + if (address & (1 << i)) + SDA_HI(); + else + SDA_LO(); + + SCL_HI(); + SCL_LO(); + } + + SDA_DIS(); + SCL_HI(); + SDA_IN(i); + SCL_LO(); + SDA_EN(); + + SDA_DIS(); + for (i = 7; i >= 0; i--) + { + SCL_HI(); + SDA_IN(bit); + byte |= bit << i; + SCL_LO(); + } + + SDA_LO(); + SCL_HI(); + SDA_HI(); + SCL_LO(); + SCL_HI(); + + return byte; +} + + +static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset) +{ + int ret; + struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip); + struct i2c_adapter *adap = gpio->client->adapter; + + if (in_atomic() || irqs_disabled()) { + ret = rt_mutex_trylock(&adap->bus_lock); + if (!ret) + /* I2C activity is ongoing. */ + return -EAGAIN; + } else { + rt_mutex_lock(&adap->bus_lock); + } + + gpio->out |= (1 << offset); + + ret = i2c_pld_write_byte(gpio->client->addr, gpio->out); + + rt_mutex_unlock(&adap->bus_lock); + + return ret; +} + +static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset) +{ + int ret; + s32 value; + struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip); + struct i2c_adapter *adap = gpio->client->adapter; + + if (in_atomic() || irqs_disabled()) { + ret = rt_mutex_trylock(&adap->bus_lock); + if (!ret) + /* I2C activity is ongoing. */ + return -EAGAIN; + } else { + rt_mutex_lock(&adap->bus_lock); + } + + value = i2c_pld_read_byte(gpio->client->addr); + + rt_mutex_unlock(&adap->bus_lock); + + return (value < 0) ? 0 : (value & (1 << offset)); +} + +static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value) +{ + int ret; + + struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip); + struct i2c_adapter *adap = gpio->client->adapter; + + unsigned bit = 1 << offset; + + if (in_atomic() || irqs_disabled()) { + ret = rt_mutex_trylock(&adap->bus_lock); + if (!ret) + /* I2C activity is ongoing. */ + return -EAGAIN; + } else { + rt_mutex_lock(&adap->bus_lock); + } + + + if (value) + gpio->out |= bit; + else + gpio->out &= ~bit; + + ret = i2c_pld_write_byte(gpio->client->addr, gpio->out); + + rt_mutex_unlock(&adap->bus_lock); + + return ret; +} + +static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value) +{ + gw_i2c_pld_output8(chip, offset, value); +} + +/*-------------------------------------------------------------------------*/ + +static int gw_i2c_pld_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct gw_i2c_pld_platform_data *pdata; + struct gw_i2c_pld *gpio; + int status; + + pdata = client->dev.platform_data; + if (!pdata) + return -ENODEV; + + /* Allocate, initialize, and register this gpio_chip. */ + gpio = kzalloc(sizeof *gpio, GFP_KERNEL); + if (!gpio) + return -ENOMEM; + + gpio->chip.base = pdata->gpio_base; + gpio->chip.can_sleep = 1; + gpio->chip.dev = &client->dev; + gpio->chip.owner = THIS_MODULE; + + gpio->chip.ngpio = pdata->nr_gpio; + gpio->chip.direction_input = gw_i2c_pld_input8; + gpio->chip.get = gw_i2c_pld_get8; + gpio->chip.direction_output = gw_i2c_pld_output8; + gpio->chip.set = gw_i2c_pld_set8; + + gpio->chip.label = client->name; + + gpio->client = client; + i2c_set_clientdata(client, gpio); + + gpio->out = 0xFF; + + status = gpiochip_add(&gpio->chip); + if (status < 0) + goto fail; + + dev_info(&client->dev, "gpios %d..%d on a %s%s\n", + gpio->chip.base, + gpio->chip.base + gpio->chip.ngpio - 1, + client->name, + client->irq ? " (irq ignored)" : ""); + + /* Let platform code set up the GPIOs and their users. + * Now is the first time anyone could use them. + */ + if (pdata->setup) { + status = pdata->setup(client, + gpio->chip.base, gpio->chip.ngpio, + pdata->context); + if (status < 0) + dev_warn(&client->dev, "setup --> %d\n", status); + } + + return 0; + +fail: + dev_dbg(&client->dev, "probe error %d for '%s'\n", + status, client->name); + kfree(gpio); + return status; +} + +static int gw_i2c_pld_remove(struct i2c_client *client) +{ + struct gw_i2c_pld_platform_data *pdata = client->dev.platform_data; + struct gw_i2c_pld *gpio = i2c_get_clientdata(client); + int status = 0; + + if (pdata->teardown) { + status = pdata->teardown(client, + gpio->chip.base, gpio->chip.ngpio, + pdata->context); + if (status < 0) { + dev_err(&client->dev, "%s --> %d\n", + "teardown", status); + return status; + } + } + + gpiochip_remove(&gpio->chip); + kfree(gpio); + return 0; +} + +static struct i2c_driver gw_i2c_pld_driver = { + .driver = { + .name = "gw_i2c_pld", + .owner = THIS_MODULE, + }, + .probe = gw_i2c_pld_probe, + .remove = gw_i2c_pld_remove, + .id_table = gw_i2c_pld_id, +}; + +static int __init gw_i2c_pld_init(void) +{ + return i2c_add_driver(&gw_i2c_pld_driver); +} +module_init(gw_i2c_pld_init); + +static void __exit gw_i2c_pld_exit(void) +{ + i2c_del_driver(&gw_i2c_pld_driver); +} +module_exit(gw_i2c_pld_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Chris Lang"); Index: linux-3.18.5/include/linux/i2c/gw_i2c_pld.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-3.18.5/include/linux/i2c/gw_i2c_pld.h 2015-02-09 13:55:16.946041675 +0100 @@ -0,0 +1,20 @@ +#ifndef __LINUX_GW_I2C_PLD_H +#define __LINUX_GW_I2C_PLD_H + +/** + * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD + */ + +struct gw_i2c_pld_platform_data { + unsigned gpio_base; + unsigned nr_gpio; + int (*setup)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + int gpio, unsigned ngpio, + void *context); + void *context; +}; + +#endif /* __LINUX_GW_I2C_PLD_H */