--- a/arch/mips/include/asm/mach-ralink/mt7621.h +++ b/arch/mips/include/asm/mach-ralink/mt7621.h @@ -19,6 +19,10 @@ #define SYSC_REG_CHIP_REV 0x0c #define SYSC_REG_SYSTEM_CONFIG0 0x10 #define SYSC_REG_SYSTEM_CONFIG1 0x14 +#define SYSC_REG_CLKCFG0 0x2c +#define SYSC_REG_CUR_CLK_STS 0x44 + +#define MEMC_REG_CPU_PLL 0x648 #define CHIP_REV_PKG_MASK 0x1 #define CHIP_REV_PKG_SHIFT 16 @@ -26,6 +30,22 @@ #define CHIP_REV_VER_SHIFT 8 #define CHIP_REV_ECO_MASK 0xf +#define XTAL_MODE_SEL_MASK 0x7 +#define XTAL_MODE_SEL_SHIFT 6 + +#define CPU_CLK_SEL_MASK 0x3 +#define CPU_CLK_SEL_SHIFT 30 + +#define CUR_CPU_FDIV_MASK 0x1f +#define CUR_CPU_FDIV_SHIFT 8 +#define CUR_CPU_FFRAC_MASK 0x1f +#define CUR_CPU_FFRAC_SHIFT 0 + +#define CPU_PLL_PREDIV_MASK 0x3 +#define CPU_PLL_PREDIV_SHIFT 12 +#define CPU_PLL_FBDIV_MASK 0x7f +#define CPU_PLL_FBDIV_SHIFT 4 + #define MT7621_DRAM_BASE 0x0 #define MT7621_DDR2_SIZE_MIN 32 #define MT7621_DDR2_SIZE_MAX 256 --- a/arch/mips/ralink/mt7621.c +++ b/arch/mips/ralink/mt7621.c @@ -10,6 +10,10 @@ #include #include #include +#include +#include +#include +#include #include #include @@ -18,16 +22,12 @@ #include #include #include +#include #include #include "common.h" -#define SYSC_REG_SYSCFG 0x10 -#define SYSC_REG_CPLL_CLKCFG0 0x2c -#define SYSC_REG_CUR_CLK_STS 0x44 -#define CPU_CLK_SEL (BIT(30) | BIT(31)) - #define MT7621_GPIO_MODE_UART1 1 #define MT7621_GPIO_MODE_I2C 2 #define MT7621_GPIO_MODE_UART3_MASK 0x3 @@ -113,49 +113,89 @@ static struct rt2880_pmx_group mt7621_pi { 0 } }; +static struct clk *clks[MT7621_CLK_MAX]; +static struct clk_onecell_data clk_data = { + .clks = clks, + .clk_num = ARRAY_SIZE(clks), +}; + phys_addr_t mips_cpc_default_phys_base(void) { panic("Cannot detect cpc address"); } -void __init ralink_clk_init(void) +static struct clk *__init mt7621_add_sys_clkdev( + const char *id, unsigned long rate) { - int cpu_fdiv = 0; - int cpu_ffrac = 0; - int fbdiv = 0; - u32 clk_sts, syscfg; - u8 clk_sel = 0, xtal_mode; - u32 cpu_clk; + struct clk *clk; + int err; + + clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate); + if (IS_ERR(clk)) + panic("failed to allocate %s clock structure", id); + + err = clk_register_clkdev(clk, id, NULL); + if (err) + panic("unable to register %s clock device", id); - if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0) - clk_sel = 1; + return clk; +} + +void __init ralink_clk_init(void) +{ + u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac; + u32 pll, prediv, fbdiv; + u32 xtal_clk, cpu_clk, bus_clk; + const static u32 prediv_tbl[] = {0, 1, 2, 2}; + + syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); + xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK; + + clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0); + clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK; + + curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); + ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK; + ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK; + + if (xtal_sel <= 2) + xtal_clk = 20 * 1000 * 1000; + else if (xtal_sel <= 5) + xtal_clk = 40 * 1000 * 1000; + else + xtal_clk = 25 * 1000 * 1000; switch (clk_sel) { case 0: - clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); - cpu_fdiv = ((clk_sts >> 8) & 0x1F); - cpu_ffrac = (clk_sts & 0x1F); - cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000; + cpu_clk = 500 * 1000 * 1000; break; - case 1: - fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1; - syscfg = rt_sysc_r32(SYSC_REG_SYSCFG); - xtal_mode = (syscfg >> 6) & 0x7; - if (xtal_mode >= 6) { - /* 25Mhz Xtal */ - cpu_clk = 25 * fbdiv * 1000 * 1000; - } else if (xtal_mode >= 3) { - /* 40Mhz Xtal */ - cpu_clk = 40 * fbdiv * 1000 * 1000; - } else { - /* 20Mhz Xtal */ - cpu_clk = 20 * fbdiv * 1000 * 1000; - } + pll = rt_memc_r32(MEMC_REG_CPU_PLL); + fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK; + prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK; + cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv]; break; + default: + cpu_clk = xtal_clk; } + + cpu_clk = cpu_clk / ffiv * ffrac; + bus_clk = cpu_clk / 4; + + clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk); + clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk); + + pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000); + mips_hpt_frequency = cpu_clk / 2; } +static void __init mt7621_clocks_init_dt(struct device_node *np) +{ + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +CLK_OF_DECLARE(ar7100, "mediatek,mt7621-pll", mt7621_clocks_init_dt); + void __init ralink_of_remap(void) { rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc"); --- a/arch/mips/ralink/timer-gic.c +++ b/arch/mips/ralink/timer-gic.c @@ -11,14 +11,14 @@ #include #include -#include +#include #include "common.h" void __init plat_time_init(void) { ralink_of_remap(); - + ralink_clk_init(); of_clk_init(NULL); timer_probe(); } --- /dev/null +++ b/include/dt-bindings/clock/mt7621-clk.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2018 Weijie Gao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_BINDINGS_MT7621_CLK_H +#define __DT_BINDINGS_MT7621_CLK_H + +#define MT7621_CLK_CPU 0 +#define MT7621_CLK_BUS 1 + +#define MT7621_CLK_MAX 2 + +#endif /* __DT_BINDINGS_MT7621_CLK_H */