/dts-v1/; #include "mt7620a_lenovo_newifi-y1.dtsi" / { compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc"; model = "Lenovo Y1S"; aliases { led-boot = &led_power_blue; led-failsafe = &led_power_blue; led-running = &led_power_blue; led-upgrade = &led_power_blue; label-mac-device = ðernet; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; usb0 { gpio-export,name = "usb0"; gpio-export,output = <1>; gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; }; usb1 { gpio-export,name = "usb1"; gpio-export,output = <1>; gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; }; usb2 { gpio-export,name = "usb2"; gpio-export,output = <1>; gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; }; }; leds { compatible = "gpio-leds"; power1 { label = "newifi-y1s:yellow:power"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; led_power_blue: power2 { label = "newifi-y1s:blue:power"; gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; }; wlan1 { label = "newifi-y1s:yellow:wifi"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; }; wlan2 { label = "newifi-y1s:blue:wifi"; gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; }; usb1 { label = "newifi-y1s:yellow:usb"; gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; }; usb2 { label = "newifi-y1s:blue:usb"; gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; trigger-sources = <&ohci_port1>, <&ehci_port1>; linux,default-trigger = "usbport"; }; internet { label = "newifi-y1s:blue:internet"; gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; }; }; }; ðernet { pinctrl-names = "default"; pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>; mtd-mac-address = <&factory 0x28>; mediatek,portmap = "wllll"; port@4 { status = "okay"; phy-handle = <&phy4>; phy-mode = "rgmii"; }; port@5 { status = "okay"; phy-handle = <&phy5>; phy-mode = "rgmii"; }; mdio-bus { status = "okay"; phy4: ethernet-phy@4 { reg = <4>; phy-mode = "rgmii"; }; phy5: ethernet-phy@5 { reg = <5>; phy-mode = "rgmii"; }; }; }; &gsw { mediatek,port4 = "gmac"; };