From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Sun, 30 Dec 2018 23:24:41 +0100 Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT This patch apply chages for OpenWRT in P2020RDB dts file. Signed-off-by: Pawel Dembicki --- arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++--------- 1 file changed, 63 insertions(+), 35 deletions(-) --- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts +++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts @@ -2,6 +2,7 @@ * P2020 RDB Device Tree Source * * Copyright 2009-2012 Freescale Semiconductor Inc. + * Copyright 2018 Pawel Dembicki * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -9,10 +10,15 @@ * option) any later version. */ +/dts-v1/; + /include/ "p2020si-pre.dtsi" +#include +#include + / { - model = "fsl,P2020RDB"; + model = "Freescale P2020RDB"; compatible = "fsl,P2020RDB"; aliases { @@ -38,48 +44,38 @@ 0x2 0x0 0x0 0xffb00000 0x00020000>; nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x1000000>; bank-width = <2>; device-width = <1>; - partition@0 { - /* This location must not be altered */ - /* 256KB for Vitesse 7385 Switch firmware */ - reg = <0x0 0x00040000>; - label = "NOR (RO) Vitesse-7385 Firmware"; - read-only; - }; - - partition@40000 { - /* 256KB for DTB Image */ - reg = <0x00040000 0x00040000>; - label = "NOR (RO) DTB Image"; - read-only; - }; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - partition@80000 { - /* 3.5 MB for Linux Kernel Image */ - reg = <0x00080000 0x00380000>; - label = "NOR (RO) Linux Kernel Image"; - read-only; - }; + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; - partition@400000 { - /* 11MB for JFFS2 based Root file System */ - reg = <0x00400000 0x00b00000>; - label = "NOR (RW) JFFS2 Root File System"; - }; + partition@40000 { + compatible = "denx,fit"; + reg = <0x00040000 0x00ec0000>; + label = "firmware"; + }; - partition@f00000 { - /* This location must not be altered */ - /* 512KB for u-boot Bootloader Image */ - /* 512KB for u-boot Environment Variables */ - reg = <0x00f00000 0x00100000>; - label = "NOR (RO) U-Boot Image"; - read-only; + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "u-boot"; + read-only; + }; }; }; @@ -144,13 +140,43 @@ soc: soc@ffe00000 { ranges = <0x0 0x0 0xffe00000 0x100000>; + gpio0: gpio-controller@fc00 { + }; + i2c@3000 { + temperature-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; }; }; + i2c@3100 { + pmic@11 { + compatible = "zl2006"; + reg = <0x11>; + }; + + gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + }; + + eeprom@52 { + compatible = "atmel,24c01"; + reg = <0x52>; + }; + }; + spi@7000 { flash@0 { #address-cells = <1>; @@ -204,10 +230,12 @@ phy0: ethernet-phy@0 { interrupts = <3 1 0 0>; reg = <0x0>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; phy1: ethernet-phy@1 { interrupts = <3 1 0 0>; reg = <0x1>; + reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; tbi-phy@2 { device_type = "tbi-phy";