// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include "mt7621.dtsi" #include #include / { compatible = "dlink,dir-878-a1", "mediatek,mt7621-soc"; model = "D-Link DIR-878 A1"; aliases { led-boot = &led_power_orange; led-failsafe = &led_power_green; led-running = &led_power_green; led-upgrade = &led_net_orange; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,57600"; }; leds { compatible = "gpio-leds"; led_power_orange: power_orange { label = "dir-878-a1:orange:power"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; }; led_power_green: power_green { label = "dir-878-a1:green:power"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; led_net_orange: net_orange { label = "dir-878-a1:orange:net"; gpios = <&gpio 4 GPIO_ACTIVE_LOW>; }; net_green { label = "dir-878-a1:green:net"; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; wifi { label = "wifi"; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x20000>; read-only; }; partition@60000 { compatible = "sge,uimage"; label = "firmware"; reg = <0x60000 0xfa0000>; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0000>; ieee80211-freq-limit = <2400000 2500000>; led { led-active-low; }; }; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; led { led-active-low; }; }; }; &gmac0 { mtd-mac-address = <&factory 0xe000>; }; &switch0 { ports { port@0 { status = "okay"; label = "lan4"; }; port@1 { status = "okay"; label = "lan3"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan1"; }; port@4 { status = "okay"; label = "wan"; mtd-mac-address = <&factory 0xe006>; }; }; }; &state_default { gpio { groups = "i2c", "uart3", "jtag", "wdt"; function = "gpio"; }; };