// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include "mt7621.dtsi" #include #include / { compatible = "zyxel,wap6805", "mediatek,mt7621-soc"; model = "ZyXEL WAP6805"; aliases { led-boot = &led_status_green; led-failsafe = &led_status_red; led-running = &led_status_green; led-upgrade = &led_status_green; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,57600"; }; leds { compatible = "gpio-leds"; led_status_red: status_red { label = "wap6805:red:status"; gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; }; status_blink { label = "wap6805:blink:status"; gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; }; led_status_green: status_green { label = "wap6805:green:status"; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; wps { label = "wps"; gpios = <&gpio 8 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Bootloader"; reg = <0x0 0x100000>; read-only; }; partition@100000 { label = "MRD"; reg = <0x100000 0x100000>; read-only; }; factory: partition@200000 { label = "Factory"; reg = <0x200000 0x100000>; read-only; }; partition@300000 { label = "Config"; reg = <0x300000 0x100000>; }; partition@400000 { label = "Kernel"; reg = <0x400000 0x2000000>; }; partition@800000 { label = "ubi"; reg = <0x800000 0x1c00000>; }; partition@2400000 { label = "Kernel2"; reg = <0x2400000 0x2000000>; }; partition@4400000 { label = "Private"; reg = <0x4400000 0x100000>; }; partition@4500000 { label = "Log"; reg = <0x4500000 0x1000000>; }; partition@5500000 { label = "App"; reg = <0x5500000 0x2b00000>; }; }; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0>; }; }; &gmac0 { mtd-mac-address = <&factory 0xe000>; }; &gmac1 { status = "okay"; fixed-link { speed = <1000>; full-duplex; }; }; &switch0 { ports { port@0 { status = "okay"; label = "lan4"; }; port@1 { status = "okay"; label = "lan3"; }; port@2 { status = "okay"; label = "lan2"; }; port@3 { status = "okay"; label = "lan1"; }; }; }; &xhci { status = "disabled"; }; &state_default { gpio { groups = "i2c", "uart3", "jtag", "wdt"; function = "gpio"; }; };