/dts-v1/; #include "mt7628an.dtsi" #include #include / { compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc"; model = "Buffalo WCR-1166DS"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; aoss { label = "aoss"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; linux,code = ; }; ap { label = "ap"; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; linux,code = ; linux,input-type = ; }; reset { label = "reset"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; router_o { label = "wcr-1166ds:orange:router"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; router_g { label = "wcr-1166ds:green:router"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; internet_o { label = "wcr-1166ds:orange:internet"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; internet_g { label = "wcr-1166ds:green:internet"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; wireless_o { label = "wcr-1166ds:orange:wireless"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; wireless_g { label = "wcr-1166ds:green:wireless"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; diag { label = "wcr-1166ds:orange:diag"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; led_power: power { label = "wcr-1166ds:green:power"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; }; }; &ehci { status = "disabled"; }; &esw { mediatek,portmap = <0x2f>; mediatek,portdisable = <0x27>; }; &ohci { status = "disabled"; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s"; ralink,function = "gpio"; }; }; }; &spi0 { status = "okay"; m25p80@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <10000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "openwrt,trx"; label = "firmware"; reg = <0x50000 0x7c0000>; }; partition@810000 { label = "firmware2"; reg = <0x810000 0x7c0000>; }; partition@fd0000 { label = "glbcfg"; reg = <0xfd0000 0x10000>; read-only; }; partition@fe0000 { label = "board_data"; reg = <0xfe0000 0x10000>; read-only; }; }; }; }; &wmac { status = "okay"; };