// SPDX-License-Identifier: GPL-2.0 /dts-v1/; #include "mt7621.dtsi" #include #include / { compatible = "netgear,r6350", "mediatek,mt7621-soc"; model = "Netgear R6350"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; }; chosen { bootargs = "console=ttyS0,57600"; }; leds { compatible = "gpio-leds"; led_power: power { label = "r6350:green:power"; gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; usb { label = "r6350:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>; linux,default-trigger = "usbport"; }; internet { label = "r6350:green:wan"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; wifi { label = "r6350:green:wifi"; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; wps { label = "wps"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; linux,code = ; }; reset { label = "reset"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; linux,code = ; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; usbpower { gpio-export,name = "usbpower"; gpio-export,output = <1>; gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; }; }; }; &nand { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x100000>; read-only; }; partition@100000 { label = "SC PART_MAP"; reg = <0x100000 0x100000>; read-only; }; partition@200000 { label = "kernel"; reg = <0x200000 0x400000>; }; partition@600000 { label = "ubi"; reg = <0x600000 0x2800000>; }; partition@2e00000 { label = "reserved0"; reg = <0x2e00000 0x1800000>; read-only; }; factory: partition@4600000 { label = "factory"; reg = <0x4600000 0x200000>; read-only; }; partition@4800000 { label = "reserved1"; reg = <0x4800000 0x3800000>; read-only; }; }; }; &pcie { status = "okay"; }; &pcie1 { wifi@0,0 { reg = <0x0 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0>; ieee80211-freq-limit = <2400000 2500000>; }; }; ðernet { mtd-mac-address = <&factory 0x4>; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "uart3", "uart2", "jtag", "wdt"; ralink,function = "gpio"; }; }; };