/dts-v1/; #include "mt7621.dtsi" #include #include / { compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc"; model = "Newifi-D1"; aliases { led-boot = &led_blue; led-failsafe = &led_blue; led-running = &led_blue; led-upgrade = &led_blue; }; chosen { bootargs = "console=ttyS0,115200"; }; leds { compatible = "gpio-leds"; status-red { label = "newifi-d1:red:status"; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; status-green { label = "newifi-d1:green:status"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; led_blue: status-blue { label = "newifi-d1:blue:status"; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; reset { label = "reset"; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; linux,code = ; }; }; gpio_export { compatible = "gpio-export"; #size-cells = <0>; usb2power { gpio-export,name = "usb2power"; gpio-export,output = <1>; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; }; usb3power { gpio-export,name = "usb3power"; gpio-export,output = <1>; gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; }; }; }; &sdhci { status = "okay"; }; &spi0 { status = "okay"; m25p80@0 { compatible = "mx25l25635f", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "u-boot-env"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x50000 0x1fb0000>; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &pcie1 { mt76@0,0 { reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0000>; }; }; ðernet { mtd-mac-address = <&factory 0xe000>; }; &pinctrl { state_default: pinctrl0 { gpio { ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c"; ralink,function = "gpio"; }; }; };