/dts-v1/; #include "bcm6362.dtsi" #include / { model = "SFR neufbox 6 (Sercomm)"; compatible = "sfr,nb6-ser-r0", "brcm,bcm6362"; chosen { bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; }; gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; debounce-interval = <60>; service { label = "service"; gpios = <&pinctrl 10 1>; linux,code = ; }; wlan { label = "wlan"; gpios = <&pinctrl 12 1>; linux,code = ; }; reset { label = "reset"; gpios = <&pinctrl 24 1>; linux,code = ; }; wps { label = "wps"; gpios = <&pinctrl 25 1>; linux,code = ; }; }; switch { compatible = "realtek,rtl8367"; gpio-sda = <&pinctrl 18 0>; gpio-sck = <&pinctrl 20 0>; realtek,extif0 = <1 5 1 1 1 1 1 1 2>; }; }; &hsspi { status = "ok"; flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <20000000>; spi-tx-bus-width = <2>; spi-rx-bus-width = <2>; reg = <0>; #address-cells = <1>; #size-cells = <1>; linux,part-probe = "bcm63xxpart"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; cfe@0 { reg = <0x000000 0x010000>; label = "cfe"; read-only; }; linux@10000 { reg = <0x010000 0xfe0000>; label = "linux"; compatible = "brcm,bcm963xx-imagetag"; }; nvram@ff0000 { reg = <0xff0000 0x010000>; label = "nvram"; }; }; }; }; &uart0 { status = "ok"; };