// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include #include #include "ar9344.dtsi" / { compatible = "compex,wpj344-16m", "qca,ar9344"; model = "Compex WPJ344 (16MB flash)"; aliases { label-mac-device = ð0; led-boot = &led_status; led-failsafe = &led_status; led-running = &led_status; led-upgrade = &led_status; }; leds { compatible = "gpio-leds"; led_status: status { label = "wpj344:green:status"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; sig1 { label = "wpj344:red:sig1"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; sig2 { label = "wpj344:yellow:sig2"; gpios = <&gpio 20 GPIO_ACTIVE_LOW>; }; sig3 { label = "wpj344:green:sig3"; gpios = <&gpio 21 GPIO_ACTIVE_LOW>; }; sig4 { label = "wpj344:green:sig4"; gpios = <&gpio 22 GPIO_ACTIVE_LOW>; }; }; keys { compatible = "gpio-keys"; reset { linux,code = ; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; }; }; &ref { clock-frequency = <40000000>; }; &uart { status = "okay"; }; &spi { status = "okay"; num-cs = <1>; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { label = "u-boot"; reg = <0x000000 0x030000>; read-only; }; partition@30000 { label = "firmware"; reg = <0x030000 0xfc0000>; compatible = "denx,uimage"; }; art: partition@ff0000 { label = "art"; reg = <0xff0000 0x010000>; read-only; }; }; }; }; &usb { status = "okay"; }; &usb_phy { status = "okay"; }; &pcie { status = "okay"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; }; &mdio0 { status = "okay"; phy-mask = <0>; phy0: ethernet-phy@0 { reg = <0>; phy-mode = "rgmii"; qca,ar8327-initvals = < 0x04 0x07600000 /* PORT0 PAD MODE CTRL */ 0x10 0x80000080 /* POWER_ON_STRIP */ 0x50 0x00000000 /* LED_CTRL0 */ 0x54 0xc737c737 /* LED_CTRL1 */ 0x58 0x00000000 /* LED_CTRL2 */ 0x5c 0x00c30c00 /* LED_CTRL3 */ 0x7c 0x0000007e /* PORT0_STATUS */ >; }; }; ð0 { status = "okay"; pll-data = <0x06000000 0x00000101 0x00001616>; mtd-mac-address = <&uboot 0x2e010>; phy-mode = "rgmii"; phy-handle = <&phy0>; };