// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include #include #include "ar9341.dtsi" / { model = "TP-Link TL-WR841N/ND v8"; compatible = "tplink,tl-wr841-v8", "qca,ar9341"; aliases { serial0 = &uart; led-boot = &system; led-failsafe = &system; led-running = &system; led-upgrade = &system; }; keys { compatible = "gpio-keys-polled"; poll-interval = <20>; pinctrl-names = "default"; pinctrl-0 = <&jtag_disable_pins>; reset { label = "Reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; rfkill { label = "WiFi"; linux,code = ; gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; system: power { label = "tp-link:green:power"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; wlan { label = "tp-link:green:wlan"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; qss { label = "tp-link:green:qss"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; wan { label = "tp-link:green:wan"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; lan1 { label = "tp-link:green:lan1"; gpios = <&gpio 19 GPIO_ACTIVE_LOW>; }; lan2 { label = "tp-link:green:lan2"; gpios = <&gpio 20 GPIO_ACTIVE_LOW>; }; lan3 { label = "tp-link:green:lan3"; gpios = <&gpio 21 GPIO_ACTIVE_LOW>; }; lan4 { label = "tp-link:green:lan4"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; }; }; &ref { clock-frequency = <25000000>; }; &uart { status = "okay"; }; &gpio { status = "okay"; }; &spi { num-cs = <1>; status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { label = "u-boot"; reg = <0x000000 0x020000>; read-only; }; partition@20000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x020000 0x3d0000>; }; art: partition@3f0000 { label = "art"; reg = <0x3f0000 0x010000>; read-only; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy0>; mtd-mac-address = <&uboot 0x1fc00>; mtd-mac-address-increment = <(-1)>; }; ð1 { status = "okay"; mtd-mac-address = <&uboot 0x1fc00>; pll-data = <0x06000000 0x00000101 0x00001616>; gmac-config { device = <&gmac>; switch-phy-swap = <1>; }; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; mtd-mac-address = <&uboot 0x1fc00>; };