// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include "mt7621.dtsi" #include #include / { compatible = "edimax,re23s", "mediatek,mt7621-soc"; model = "Edimax RE23S"; aliases { led-boot = &led_power; led-failsafe = &led_wifi_red; led-running = &led_power; led-upgrade = &led_power; label-mac-device = &gmac0; }; chosen { bootargs = "console=ttyS0,57600"; }; leds { compatible = "gpio-leds"; led_power: power { label = "re23s:green:power"; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; wifi_green { label = "re23s:green:wifi"; gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; }; wifi_amber { label = "re23s:amber:wifi"; gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; }; led_wifi_red: wifi_red { label = "re23s:red:wifi"; gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; linux,code = ; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "bootloader"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "config"; reg = <0x30000 0x10000>; read-only; }; factory: partition@40000 { label = "factory"; reg = <0x40000 0x10000>; read-only; }; partition@50000 { label = "cimage"; reg = <0x50000 0x20000>; read-only; }; partition@70000 { compatible = "edimax,uimage"; label = "firmware"; reg = <0x70000 0xf50000>; }; partition@fc0000 { label = "freespace"; reg = <0xfc0000 0x40000>; read-only; }; }; }; }; &pcie { status = "okay"; }; &pcie0 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x0>; ieee80211-freq-limit = <2400000 2500000>; }; }; &pcie1 { wifi@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&factory 0x8000>; ieee80211-freq-limit = <5000000 6000000>; }; }; &gmac0 { mtd-mac-address = <&factory 0x8004>; }; &switch0 { ports { port@4 { status = "okay"; label = "lan"; }; }; }; &state_default { gpio { groups = "uart3", "uart2", "jtag", "wdt"; function = "gpio"; }; }; &xhci { status = "disabled"; };