/* * BSD LICENSE * * Copyright (C) 2017 Christian Mehlis * Copyright (C) 2018 Mathias Kresin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the names of the copyright holders nor the names of any * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "qcom-ipq8064-v1.0.dtsi" #include #include / { compatible = "compex,wpq864", "qcom,ipq8064"; model = "Compex WPQ864"; aliases { mdio-gpio0 = &mdio0; ethernet0 = &gmac1; ethernet1 = &gmac0; led-boot = &led_pass; led-failsafe = &led_fail; led-running = &led_pass; led-upgrade = &led_pass; }; leds { compatible = "gpio-leds"; pinctrl-0 = <&led_pins>; pinctrl-names = "default"; rss4 { label = "wpq864:green:rss4"; gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; }; rss3 { label = "wpq864:green:rss3"; gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; rss2 { label = "wpq864:orange:rss2"; gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; }; rss1 { label = "wpq864:red:rss1"; gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; }; led_pass: pass { label = "wpq864:green:pass"; gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; }; led_fail: fail { label = "wpq864:green:fail"; gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; }; usb { label = "wpq864:green:usb"; gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; }; usb-pcie { label = "wpq864:green:usb-pcie"; gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; }; }; keys { compatible = "gpio-keys"; pinctrl-0 = <&button_pins>; pinctrl-names = "default"; reset { label = "reset"; gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; linux,code = ; }; }; beeper { compatible = "gpio-beeper"; pinctrl-0 = <&beeper_pins>; pinctrl-names = "default"; gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; }; }; &rpm { pinctrl-0 = <&rpm_pins>; pinctrl-names = "default"; }; &nand_controller { status = "okay"; pinctrl-0 = <&nand_pins>; pinctrl-names = "default"; mt29f2g08abbeah4@0 { compatible = "qcom,nandcs"; reg = <0>; nand-ecc-strength = <4>; nand-bus-width = <8>; nand-ecc-step-size = <512>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; SBL1@0 { label = "SBL1"; reg = <0x0000000 0x0040000>; read-only; }; MIBIB@40000 { label = "MIBIB"; reg = <0x0040000 0x0140000>; read-only; }; SBL2@180000 { label = "SBL2"; reg = <0x0180000 0x0140000>; read-only; }; SBL3@2c0000 { label = "SBL3"; reg = <0x02c0000 0x0280000>; read-only; }; DDRCONFIG@540000 { label = "DDRCONFIG"; reg = <0x0540000 0x0120000>; read-only; }; SSD@660000 { label = "SSD"; reg = <0x0660000 0x0120000>; read-only; }; TZ@780000 { label = "TZ"; reg = <0x0780000 0x0280000>; read-only; }; RPM@a00000 { label = "RPM"; reg = <0x0a00000 0x0280000>; read-only; }; APPSBL@c80000 { label = "APPSBL"; reg = <0x0c80000 0x0500000>; read-only; }; APPSBLENV@1180000 { label = "APPSBLENV"; reg = <0x1180000 0x0080000>; }; ART@1200000 { label = "ART"; reg = <0x1200000 0x0140000>; }; ubi@1340000 { label = "ubi"; reg = <0x1340000 0x4000000>; }; BOOTCONFIG@5340000 { label = "BOOTCONFIG"; reg = <0x5340000 0x0060000>; }; SBL2-1@53a0000- { label = "SBL2_1"; reg = <0x53a0000 0x0140000>; read-only; }; SBL3-1@54e0000 { label = "SBL3_1"; reg = <0x54e0000 0x0280000>; read-only; }; DDRCONFIG-1@5760000 { label = "DDRCONFIG_1"; reg = <0x5760000 0x0120000>; read-only; }; SSD-1@5880000 { label = "SSD_1"; reg = <0x5880000 0x0120000>; read-only; }; TZ-1@59a0000 { label = "TZ_1"; reg = <0x59a0000 0x0280000>; read-only; }; RPM-1@5c20000 { label = "RPM_1"; reg = <0x5c20000 0x0280000>; read-only; }; BOOTCONFIG1@5ea0000 { label = "BOOTCONFIG1"; reg = <0x5ea0000 0x0060000>; }; APPSBL-1@5f00000 { label = "APPSBL_1"; reg = <0x5f00000 0x0500000>; read-only; }; ubi-1@6400000 { label = "ubi_1"; reg = <0x6400000 0x4000000>; }; unused@a400000 { label = "unused"; reg = <0xa400000 0x5c00000>; }; }; }; }; &adm_dma { status = "okay"; }; &mdio0 { status = "okay"; pinctrl-0 = <&mdio0_pins>; pinctrl-names = "default"; ethernet-phy@0 { reg = <0>; qca,ar8327-initvals = < 0x00004 0x7600000 /* PAD0_MODE */ 0x00008 0x1000000 /* PAD5_MODE */ 0x0000c 0x80 /* PAD6_MODE */ 0x000e4 0x6a545 /* MAC_POWER_SEL */ 0x000e0 0xc74164de /* SGMII_CTRL */ 0x0007c 0x4e /* PORT0_STATUS */ 0x00094 0x4e /* PORT6_STATUS */ >; }; ethernet-phy@4 { reg = <4>; }; }; &gmac1 { status = "okay"; pinctrl-0 = <&rgmii2_pins>; pinctrl-names = "default"; phy-mode = "rgmii"; qcom,id = <1>; fixed-link { speed = <1000>; full-duplex; }; }; &gmac2 { status = "okay"; phy-mode = "sgmii"; qcom,id = <2>; fixed-link { speed = <1000>; full-duplex; }; }; &gsbi4_serial { pinctrl-0 = <&uart0_pins>; pinctrl-names = "default"; }; &flash { compatible = "jedec,spi-nor"; }; &sata_phy { status = "disabled"; }; &sata { status = "disabled"; }; &ss_phy_0 { /* USB3 port 0 SS phy */ status = "okay"; rx_eq = <2>; tx_deamp_3_5db = <32>; mpll = <160>; }; &ss_phy_1 { /* USB3 port 1 SS phy */ status = "okay"; rx_eq = <2>; tx_deamp_3_5db = <32>; mpll = <160>; }; &pcie0 { status = "okay"; /delete-property/ pinctrl-0; /delete-property/ pinctrl-names; /delete-property/ perst-gpios; }; &pcie1 { status = "okay"; }; &pcie2 { status = "okay"; /delete-property/ pinctrl-0; /delete-property/ pinctrl-names; /delete-property/ perst-gpios; }; &qcom_pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinctrl0 { pcie0_pcie2_perst { pins = "gpio3"; function = "gpio"; drive-strength = <2>; bias-disable; output-high; }; }; led_pins: led_pins { mux { pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", "gpio24", "gpio25", "gpio53"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; button_pins: button_pins { mux { pins = "gpio54"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; beeper_pins: beeper_pins { mux { pins = "gpio55"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; rpm_pins: rpm_pins { mux { pins = "gpio12", "gpio13"; function = "gsbi4"; drive-strength = <10>; bias-disable; }; }; uart0_pins: uart0_pins { mux { pins = "gpio10", "gpio11"; function = "gsbi4"; drive-strength = <10>; bias-disable; }; }; spi_pins: spi_pins { mux { pins = "gpio18", "gpio19"; function = "gsbi5"; drive-strength = <10>; bias-pull-down; }; clk { pins = "gpio21"; function = "gsbi5"; drive-strength = <12>; bias-pull-down; }; cs { pins = "gpio20"; function = "gpio"; drive-strength = <10>; bias-pull-up; }; }; }; &usb3_0 { status = "okay"; }; &usb3_1 { status = "okay"; }; &tcsr { qcom,usb-ctrl-select = ; };