// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; #include "mt7628an.dtsi" #include #include / { compatible = "tplink,re305-v1", "mediatek,mt7628an-soc"; model = "TP-Link RE305 v1"; aliases { led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; led-upgrade = &led_power; label-mac-device = ðernet; }; keys { compatible = "gpio-keys"; reset { label = "reset"; gpios = <&gpio 37 GPIO_ACTIVE_LOW>; linux,code = ; }; wps { label = "wps"; gpios = <&gpio 38 GPIO_ACTIVE_LOW>; linux,code = ; }; }; leds { compatible = "gpio-leds"; led_power: power { label = "re305-v1:blue:power"; gpios = <&gpio 39 GPIO_ACTIVE_LOW>; }; wlan2g { label = "re305-v1:blue:wlan2g"; gpios = <&gpio 41 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wlan5g { label = "re305-v1:blue:wlan5g"; gpios = <&gpio 40 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; rssi1 { label = "re305-v1:red:rssi"; gpios = <&gpio 43 GPIO_ACTIVE_LOW>; }; rssi2 { label = "re305-v1:blue:rssi"; gpios = <&gpio 42 GPIO_ACTIVE_LOW>; }; }; }; &spi0 { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x20000>; read-only; }; partition@20000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x20000 0x5e0000>; }; config: partition@600000 { label = "config"; reg = <0x600000 0x50000>; read-only; }; /* The flash space between 0x650000 and 0x7f0000 is blank in the stock firmware so it is left out as well. */ radio: partition@7f0000 { label = "radio"; reg = <0x7f0000 0x10000>; read-only; }; }; }; }; &state_default { gpio { groups = "refclk", "wdt", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an"; function = "gpio"; }; }; &pcie { status = "okay"; }; &pcie0 { mt76@0,0 { compatible = "mediatek,mt76"; reg = <0x0000 0 0 0 0>; mediatek,mtd-eeprom = <&radio 0x8000>; ieee80211-freq-limit = <5000000 6000000>; mtd-mac-address = <&config 0x10008>; mtd-mac-address-increment = <2>; }; }; &wmac { status = "okay"; mediatek,mtd-eeprom = <&radio 0x0>; mtd-mac-address = <&config 0x10008>; mtd-mac-address-increment = <1>; }; ðernet { mtd-mac-address = <&config 0x10008>; };