#include "mt7628an.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "onion,omega2", "mediatek,mt7628an-soc";

	aliases {
		led-boot = &system_led;
		led-failsafe = &system_led;
		led-running = &system_led;
		led-upgrade = &system_led;
	};

	chosen {
		bootargs = "console=ttyS0,115200";
	};

	leds {
		compatible = "gpio-leds";

		system_led: system {
			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
		};
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 38 GPIO_ACTIVE_HIGH>;
			linux,code = <KEY_RESTART>;
		};
	};
};

&state_default {
	gpio {
		groups = "gpio";
		function = "gpio";
	};

	perst {
		groups = "perst";
		function = "gpio";
	};

	refclk {
		groups = "refclk";
		function = "gpio";
	};

	i2s {
		groups = "i2s";
		function = "gpio";
	};

	spis {
		groups = "spis";
		function = "gpio";
	};

	wled_kn {
		groups = "wled_kn";
		function = "gpio";
	};

	wled_an {
		groups = "wled_an";
		function = "gpio";
	};

	wdt {
		groups = "wdt";
		function = "gpio";
	};

	pwm0 {
		groups = "pwm0";
		function = "gpio";
	};

	pwm1 {
		groups = "pwm1";
		function = "gpio";
	};
};

&spi0 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <40000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "u-boot-env";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
			};

			firmware: partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
			};
		};
	};

	spidev@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "linux,spidev";
		reg = <1>;
		spi-max-frequency = <40000000>;
	};
};

&i2c {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&uart2 {
	status = "okay";
};

&ethernet {
	mtd-mac-address = <&factory 0x2e>;
};

&sdhci {
	status = "okay";
	mediatek,cd-low;
};

&wmac {
	status = "okay";
};