From efa968c18abab78c5e0c40a853caf286c3629a59 Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Tue, 17 Mar 2020 21:28:01 +0100 Subject: [PATCH v3] ARM: dts: kirkwood: Add Check Point L-50 board This patch adds dts for the Check Point L-50 from 600/1100 series routers. Specification: -CPU: Marvell Kirkwood 88F6821 1200MHz -RAM: 512MB -Flash: NAND 512MB -WiFi: mPCIe card based on Atheros AR9287 b/g/n -WAN: 1 Gigabit Port (Marvell 88E1116R PHY) -LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+3)) -USB: 2x USB2.0 -Express card slot -SD card slot -Serial console: RJ-45 115200 8n1 -Unsupported DSL Reviewed-by: Andrew Lunn Signed-off-by: Pawel Dembicki --- Changes in v3: - fix typo and code style issues pointed by OpenWrt guys Changes in v2: - none arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/kirkwood-l-50.dts | 438 ++++++++++++++++++++++++++++ 2 files changed, 439 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-l-50.dts --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -270,6 +270,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-iomega_ix2_200.dtb \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ + kirkwood-l-50.dtb \ kirkwood-laplug.dtb \ kirkwood-linkstation-lsqvl.dtb \ kirkwood-linkstation-lsvl.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-l-50.dts @@ -0,0 +1,438 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Check Point L-50 Board Description + * Copyright 2020 Pawel Dembicki + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Check Point L-50"; + compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>; + pinctrl-names = "default"; + + pmx_sysrst: pmx-sysrst { + marvell,pins = "mpp6"; + marvell,function = "sysrst"; + }; + + pmx_button29: pmx_button29 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led38: pmx_led38 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + mvsdio@90000 { + status = "okay"; + cd-gpios = <&gpio1 14 9>; + }; + + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + gpio2: gpio-expander@20{ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1505q"; + reg = <0x20>; + + gpio-controller; + }; + + /* Three GPIOs from 0x21 exp. are undescribed in dts: + * 1: DSL module reset (active low) + * 5: mPCIE reset (active low) + * 6: Express card reset (active low) + */ + gpio3: gpio-expander@21{ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1505q"; + reg = <0x21>; + + gpio-controller; + }; + + rtc@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + status_green { + label = "l-50:green:status"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + status_red { + label = "l-50:red:status"; + gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "l-50:green:wifi"; + gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + internet_green { + label = "l-50:green:internet"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + internet_red { + label = "l-50:red:internet"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + usb1_green { + label = "l-50:green:usb1"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port3>; + }; + + usb1_red { + label = "l-50:red:usb1"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + usb2_green { + label = "l-50:green:usb2"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "usbport"; + trigger-sources = <&hub_port1>; + }; + + usb2_red { + label = "l-50:red:usb2"; + gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + }; + }; + + usb2_pwr { + compatible = "regulator-fixed"; + regulator-name = "usb2_pwr"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + usb1_pwr { + compatible = "regulator-fixed"; + regulator-name = "usb1_pwr"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + mpcie_pwr { + compatible = "regulator-fixed"; + regulator-name = "mpcie_pwr"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + express_card_pwr { + compatible = "regulator-fixed"; + regulator-name = "express_card_pwr"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + keys { + compatible = "gpio-keys"; + + factory_defaults { + label = "factory_defaults"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy8: ethernet-phy@8 { + reg = <0x08>; + }; + + switch0: switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan6"; + }; + + port@3 { + reg = <3>; + label = "lan2"; + }; + + port@4 { + reg = <4>; + label = "lan7"; + }; + + switch0port5: port@5 { + reg = <5>; + phy-mode = "rgmii-txid"; + link = <&switch1port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + phy-mode = "rgmii-id"; + ethernet = <ð1port>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + + switch@11 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11>; + dsa,member = <0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan8"; + }; + + port@2 { + reg = <2>; + label = "lan4"; + }; + + port@3 { + reg = <3>; + label = "dmz"; + }; + + switch1port5: port@5 { + reg = <5>; + phy-mode = "rgmii-txid"; + link = <&switch0port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "dsl"; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy8>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x000c0000>; + }; + + partition@a0000 { + label = "bootldr-env"; + reg = <0x000c0000 0x00040000>; + }; + + partition@100000 { + label = "kernel-1"; + reg = <0x00100000 0x00800000>; + }; + + partition@900000 { + label = "rootfs-1"; + reg = <0x00900000 0x07100000>; + }; + + partition@7a00000 { + label = "kernel-2"; + reg = <0x07a00000 0x00800000>; + }; + + partition@8200000 { + label = "rootfs-2"; + reg = <0x08200000 0x07100000>; + }; + + partition@f300000 { + label = "default_sw"; + reg = <0x0f300000 0x07900000>; + }; + + partition@16c00000 { + label = "logs"; + reg = <0x16c00000 0x01800000>; + }; + + partition@18400000 { + label = "preset_cfg"; + reg = <0x18400000 0x00100000>; + }; + + partition@18500000 { + label = "adsl"; + reg = <0x18500000 0x00100000>; + }; + + partition@18600000 { + label = "storage"; + reg = <0x18600000 0x07a00000>; + }; +}; + +&rtc { + status = "disabled"; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&sata_phy0 { + status = "disabled"; +}; + +&sata_phy1 { + status = "disabled"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + #trigger-source-cells = <0>; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + hub_port3: port@3 { + reg = <3>; + #trigger-source-cells = <0>; + }; + }; +};