From: Russell King Date: Thu, 5 Jan 2017 00:23:40 +0000 Subject: [PATCH] net: phy: don't double-read clause 45 status register One of the design decisions behind the link status bit in the status register is that it latches low on link loss. This is so that link loss events are not missed. Double-reading the status register means that we always read the current state of the link, clearing any link loss event. This can cause problems - for example, if the link has negotiated a different set of operating parameters, these will not be communicated to the MAC as the PHY state machine will still think that the link has remained active. Signed-off-by: Russell King --- --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -143,12 +143,9 @@ int genphy_c45_read_link(struct phy_devi devad = __ffs(mmd_mask); mmd_mask &= ~BIT(devad); - val = phy_read_mmd(phydev, devad, MDIO_STAT1); - if (val < 0) - return val; - - /* Read twice because link state is latched and a - * read moves the current state into the register + /* The link state is latched low so that momentary link + * drops can be detected. Do not double-read the status + * register if the link is down. */ val = phy_read_mmd(phydev, devad, MDIO_STAT1); if (val < 0)