/dts-v1/; #include "bcm6368.dtsi" #include #include / { model = "ADB P.DG AV4202N"; compatible = "adb,av4202n", "brcm,bcm6368"; aliases { led-boot = &led_power_white; led-failsafe = &led_power_white; led-running = &led_power_white; led-upgrade = &led_power_white; }; chosen { bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; stdout-path = "serial0:115200n8"; }; keys { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; reset { label = "reset"; gpios = <&pinctrl 34 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; wlan { label = "wlan"; gpios = <&pinctrl 37 GPIO_ACTIVE_LOW>; linux,code = ; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; led_power_white: power_white { label = "AV4202N:white:power"; gpios = <&pinctrl 10 GPIO_ACTIVE_LOW>; default-state = "on"; }; power_red { label = "AV4202N:red:power"; gpios = <&pinctrl 11 GPIO_ACTIVE_LOW>; }; wan_white { label = "AV4202N:white:wan"; gpios = <&pinctrl 26 GPIO_ACTIVE_LOW>; }; wan_red { label = "AV4202N:red:wan"; gpios = <&pinctrl 27 GPIO_ACTIVE_LOW>; }; phone_white { label = "AV4202N:white:phone"; gpios = <&pinctrl 24 GPIO_ACTIVE_LOW>; }; phone_red { label = "AV4202N:red:phone"; gpios = <&pinctrl 25 GPIO_ACTIVE_LOW>; }; wifi { label = "AV4202N:blue:wifi"; gpios = <&pinctrl 22 GPIO_ACTIVE_LOW>; }; }; }; &pflash { status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; cfe@0 { label = "CFE"; reg = <0x000000 0x020000>; read-only; }; linux@20000 { label = "linux"; reg = <0x020000 0xfc0000>; compatible = "brcm,bcm963xx-imagetag"; }; nvram@fe0000 { label = "nvram"; reg = <0xfe0000 0x020000>; }; }; }; &pinctrl { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pci>; }; &uart0 { status = "okay"; };