From patchwork Tue Feb 18 08:49:37 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Landen Chao X-Patchwork-Id: 1239956 X-Patchwork-Delegate: trini@ti.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=lists.denx.de (client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; helo=phobos.denx.de; envelope-from=u-boot-bounces@lists.denx.de; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=mediatek.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=mediatek.com header.i=@mediatek.com header.a=rsa-sha256 header.s=dk header.b=NQKfnebM; dkim-atps=neutral Received: from phobos.denx.de (phobos.denx.de [IPv6:2a01:238:438b:c500:173d:9f52:ddab:ee01]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 48MJX54ymTz9sRf for ; Tue, 18 Feb 2020 22:28:53 +1100 (AEDT) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id A68D8810D8; Tue, 18 Feb 2020 12:28:47 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=mediatek.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=mediatek.com header.i=@mediatek.com header.b="NQKfnebM"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 767F881217; Tue, 18 Feb 2020 09:50:00 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=0.5 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,MIME_BASE64_TEXT,RDNS_NONE,SPF_HELO_NONE, UNPARSEABLE_RELAY,URIBL_BLOCKED autolearn=no autolearn_force=no version=3.4.2 Received: from mailgw01.mediatek.com (unknown [210.61.82.183]) by phobos.denx.de (Postfix) with ESMTP id 40ADE811FB for ; Tue, 18 Feb 2020 09:49:46 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=mediatek.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=landen.chao@mediatek.com X-UUID: ddaa8deb3c7d4a24ba5cbcb30775fbfd-20200218 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mediatek.com; s=dk; h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; bh=qvWp4DdC1p5SZD1XJPV3kwdXTU9lBi4hbWNZQoO2oLI=; b=NQKfnebM0mIfPJuncOxa6aNY+g5wFOnlozbm/o8ViKaVNbkd8YSB0ISWOerj8lALM7E7sSP797r514G3R4EAQPPvuAm5B2wi2VuYKssTxHkvYJvCrALXp4wmQtGF+gJytfdWuHx6Np0wfbjTsLqw+JUtcDi/0jAa8TQ5y9UHr9Q=; X-UUID: ddaa8deb3c7d4a24ba5cbcb30775fbfd-20200218 Received: from mtkcas07.mediatek.inc [(172.21.101.84)] by mailgw01.mediatek.com (envelope-from ) (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS) with ESMTP id 827129897; Tue, 18 Feb 2020 16:49:43 +0800 Received: from MTKCAS06.mediatek.inc (172.21.101.30) by mtkmbs05n1.mediatek.inc (172.21.101.15) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Tue, 18 Feb 2020 16:48:45 +0800 Received: from mtksdccf07.mediatek.inc (172.21.84.99) by MTKCAS06.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via Frontend Transport; Tue, 18 Feb 2020 16:47:41 +0800 From: Landen Chao To: Ryder Lee , Weijie Gao , GSS_MTK_Uboot_upstream , Joe Hershberger , CC: , , , Subject: [U-Boot 1/1] eth: mtk-eth: add mt7531 switch support in mediatek eth driver Date: Tue, 18 Feb 2020 16:49:37 +0800 Message-ID: X-Mailer: git-send-email 2.18.0 In-Reply-To: References: MIME-Version: 1.0 X-MTK: N X-Mailman-Approved-At: Tue, 18 Feb 2020 12:28:45 +0100 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.30rc1 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.102.1 at phobos.denx.de X-Virus-Status: Clean mt7531 is a 7-ports switch with 5 embedded giga phys, and uses the same MAC design of mt7530. The cpu port6 supports SGMII only. The cpu port5 supports RGMII or SGMII in different model. mt7531 is connected to mt7622 via both RGMII and SGMII interfaces. In this patch, mt7531 cpu port5 or port6 is configured to maximum capability to align CPU MAC setting. The dts has been committed in the commit 6efa450565cdc ("arm: dts: mediatek: add ethernet and sgmii dts node for mt7622") Signed-off-by: Landen Chao Tested-by: Frank Wunderlich --- drivers/net/mtk_eth.c | 580 +++++++++++++++++++++++++++++++++--------- drivers/net/mtk_eth.h | 124 ++++++++- 2 files changed, 577 insertions(+), 127 deletions(-) diff --git a/drivers/net/mtk_eth.c b/drivers/net/mtk_eth.c index edfa5d1ce8..f7d34a2e6b 100644 --- a/drivers/net/mtk_eth.c +++ b/drivers/net/mtk_eth.c @@ -30,10 +30,12 @@ #define RX_TOTAL_BUF_SIZE (NUM_RX_DESC * PKTSIZE_ALIGN) #define TOTAL_PKT_BUF_SIZE (TX_TOTAL_BUF_SIZE + RX_TOTAL_BUF_SIZE) -#define MT7530_NUM_PHYS 5 -#define MT7530_DFL_SMI_ADDR 31 +#define MT753X_NUM_PHYS 5 +#define MT753X_NUM_PORTS 7 +#define MT753X_DFL_SMI_ADDR 31 +#define MT753X_SMI_ADDR_MASK 0x1f -#define MT7530_PHY_ADDR(base, addr) \ +#define MT753X_PHY_ADDR(base, addr) \ (((base) + (addr)) & 0x1f) #define GDMA_FWD_TO_CPU \ @@ -131,7 +133,8 @@ struct pdma_txdesc { enum mtk_switch { SW_NONE, - SW_MT7530 + SW_MT7530, + SW_MT7531 }; enum mtk_soc { @@ -173,8 +176,8 @@ struct mtk_eth_priv { enum mtk_switch sw; int (*switch_init)(struct mtk_eth_priv *priv); - u32 mt7530_smi_addr; - u32 mt7530_phy_base; + u32 mt753x_smi_addr; + u32 mt753x_phy_base; struct gpio_desc rst_gpio; int mcm; @@ -349,6 +352,174 @@ static int mtk_mmd_ind_write(struct mtk_eth_priv *priv, u8 addr, u8 devad, return priv->mii_write(priv, addr, MII_MMD_ADDR_DATA_REG, val); } +/* + * MT7530 Internal Register Address Bits + * ------------------------------------------------------------------- + * | 15 14 13 12 11 10 9 8 7 6 | 5 4 3 2 | 1 0 | + * |----------------------------------------|---------------|--------| + * | Page Address | Reg Address | Unused | + * ------------------------------------------------------------------- + */ + +static int mt753x_reg_read(struct mtk_eth_priv *priv, u32 reg, u32 *data) +{ + int ret, low_word, high_word; + + /* Write page address */ + ret = mtk_mii_write(priv, priv->mt753x_smi_addr, 0x1f, reg >> 6); + if (ret) + return ret; + + /* Read low word */ + low_word = mtk_mii_read(priv, priv->mt753x_smi_addr, (reg >> 2) & 0xf); + if (low_word < 0) + return low_word; + + /* Read high word */ + high_word = mtk_mii_read(priv, priv->mt753x_smi_addr, 0x10); + if (high_word < 0) + return high_word; + + if (data) + *data = ((u32)high_word << 16) | (low_word & 0xffff); + + return 0; +} + +static int mt753x_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 data) +{ + int ret; + + /* Write page address */ + ret = mtk_mii_write(priv, priv->mt753x_smi_addr, 0x1f, reg >> 6); + if (ret) + return ret; + + /* Write low word */ + ret = mtk_mii_write(priv, priv->mt753x_smi_addr, (reg >> 2) & 0xf, + data & 0xffff); + if (ret) + return ret; + + /* Write high word */ + return mtk_mii_write(priv, priv->mt753x_smi_addr, 0x10, data >> 16); +} + +static void mt753x_reg_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr, + u32 set) +{ + u32 val; + + mt753x_reg_read(priv, reg, &val); + val &= ~clr; + val |= set; + mt753x_reg_write(priv, reg, val); +} + +/* Indirect MDIO clause 22/45 access */ +static int mt7531_mii_rw(struct mtk_eth_priv *priv, int phy, int reg, u16 data, + u32 cmd, u32 st) +{ + ulong timeout; + u32 val, timeout_ms; + int ret = 0; + + val = (st << MDIO_ST_S) | + ((cmd << MDIO_CMD_S) & MDIO_CMD_M) | + ((phy << MDIO_PHY_ADDR_S) & MDIO_PHY_ADDR_M) | + ((reg << MDIO_REG_ADDR_S) & MDIO_REG_ADDR_M); + + if (cmd == MDIO_CMD_WRITE || cmd == MDIO_CMD_ADDR) + val |= data & MDIO_RW_DATA_M; + + mt753x_reg_write(priv, MT7531_PHY_IAC, val | PHY_ACS_ST); + + timeout_ms = 100; + timeout = get_timer(0); + while (1) { + mt753x_reg_read(priv, MT7531_PHY_IAC, &val); + + if ((val & PHY_ACS_ST) == 0) + break; + + if (get_timer(timeout) > timeout_ms) + return -ETIMEDOUT; + } + + if (cmd == MDIO_CMD_READ || cmd == MDIO_CMD_READ_C45) { + mt753x_reg_read(priv, MT7531_PHY_IAC, &val); + ret = val & MDIO_RW_DATA_M; + } + + return ret; +} + +static int mt7531_mii_ind_read(struct mtk_eth_priv *priv, u8 phy, u8 reg) +{ + u8 phy_addr; + + if (phy >= MT753X_NUM_PHYS) + return -EINVAL; + + phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, phy); + + return mt7531_mii_rw(priv, phy_addr, reg, 0, MDIO_CMD_READ, + MDIO_ST_C22); +} + +static int mt7531_mii_ind_write(struct mtk_eth_priv *priv, u8 phy, u8 reg, + u16 val) +{ + u8 phy_addr; + + if (phy >= MT753X_NUM_PHYS) + return -EINVAL; + + phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, phy); + + return mt7531_mii_rw(priv, phy_addr, reg, val, MDIO_CMD_WRITE, + MDIO_ST_C22); +} + +int mt7531_mmd_ind_read(struct mtk_eth_priv *priv, u8 addr, u8 devad, u16 reg) +{ + u8 phy_addr; + int ret; + + if (addr >= MT753X_NUM_PHYS) + return -EINVAL; + + phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, addr); + + ret = mt7531_mii_rw(priv, phy_addr, devad, reg, MDIO_CMD_ADDR, + MDIO_ST_C45); + if (ret) + return ret; + + return mt7531_mii_rw(priv, phy_addr, devad, 0, MDIO_CMD_READ_C45, + MDIO_ST_C45); +} + +static int mt7531_mmd_ind_write(struct mtk_eth_priv *priv, u8 addr, u8 devad, + u16 reg, u16 val) +{ + u8 phy_addr; + int ret; + + if (addr >= MT753X_NUM_PHYS) + return 0; + + phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, addr); + + ret = mt7531_mii_rw(priv, phy_addr, devad, reg, MDIO_CMD_ADDR, + MDIO_ST_C45); + if (ret) + return ret; + + return mt7531_mii_rw(priv, phy_addr, devad, val, MDIO_CMD_WRITE, + MDIO_ST_C45); +} + static int mtk_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) { struct mtk_eth_priv *priv = bus->priv; @@ -387,6 +558,12 @@ static int mtk_mdio_register(struct udevice *dev) priv->mmd_read = mtk_mmd_ind_read; priv->mmd_write = mtk_mmd_ind_write; break; + case SW_MT7531: + priv->mii_read = mt7531_mii_ind_read; + priv->mii_write = mt7531_mii_ind_write; + priv->mmd_read = mt7531_mmd_ind_read; + priv->mmd_write = mt7531_mmd_ind_write; + break; default: priv->mii_read = mtk_mii_read; priv->mii_write = mtk_mii_write; @@ -410,75 +587,18 @@ static int mtk_mdio_register(struct udevice *dev) return 0; } -/* - * MT7530 Internal Register Address Bits - * ------------------------------------------------------------------- - * | 15 14 13 12 11 10 9 8 7 6 | 5 4 3 2 | 1 0 | - * |----------------------------------------|---------------|--------| - * | Page Address | Reg Address | Unused | - * ------------------------------------------------------------------- - */ - -static int mt7530_reg_read(struct mtk_eth_priv *priv, u32 reg, u32 *data) +static int mt753x_core_reg_read(struct mtk_eth_priv *priv, u32 reg) { - int ret, low_word, high_word; + u8 phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, 0); - /* Write page address */ - ret = mtk_mii_write(priv, priv->mt7530_smi_addr, 0x1f, reg >> 6); - if (ret) - return ret; - - /* Read low word */ - low_word = mtk_mii_read(priv, priv->mt7530_smi_addr, (reg >> 2) & 0xf); - if (low_word < 0) - return low_word; - - /* Read high word */ - high_word = mtk_mii_read(priv, priv->mt7530_smi_addr, 0x10); - if (high_word < 0) - return high_word; - - if (data) - *data = ((u32)high_word << 16) | (low_word & 0xffff); - - return 0; + return priv->mmd_read(priv, phy_addr, 0x1f, reg); } -static int mt7530_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 data) +static void mt753x_core_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 val) { - int ret; - - /* Write page address */ - ret = mtk_mii_write(priv, priv->mt7530_smi_addr, 0x1f, reg >> 6); - if (ret) - return ret; + u8 phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, 0); - /* Write low word */ - ret = mtk_mii_write(priv, priv->mt7530_smi_addr, (reg >> 2) & 0xf, - data & 0xffff); - if (ret) - return ret; - - /* Write high word */ - return mtk_mii_write(priv, priv->mt7530_smi_addr, 0x10, data >> 16); -} - -static void mt7530_reg_rmw(struct mtk_eth_priv *priv, u32 reg, u32 clr, - u32 set) -{ - u32 val; - - mt7530_reg_read(priv, reg, &val); - val &= ~clr; - val |= set; - mt7530_reg_write(priv, reg, val); -} - -static void mt7530_core_reg_write(struct mtk_eth_priv *priv, u32 reg, u32 val) -{ - u8 phy_addr = MT7530_PHY_ADDR(priv->mt7530_phy_base, 0); - - mtk_mmd_ind_write(priv, phy_addr, 0x1f, reg, val); + priv->mmd_write(priv, phy_addr, 0x1f, reg, val); } static int mt7530_pad_clk_setup(struct mtk_eth_priv *priv, int mode) @@ -496,46 +616,46 @@ static int mt7530_pad_clk_setup(struct mtk_eth_priv *priv, int mode) } /* Disable MT7530 core clock */ - mt7530_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, 0); + mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, 0); /* Disable MT7530 PLL */ - mt7530_core_reg_write(priv, CORE_GSWPLL_GRP1, + mt753x_core_reg_write(priv, CORE_GSWPLL_GRP1, (2 << RG_GSWPLL_POSDIV_200M_S) | (32 << RG_GSWPLL_FBKDIV_200M_S)); /* For MT7530 core clock = 500Mhz */ - mt7530_core_reg_write(priv, CORE_GSWPLL_GRP2, + mt753x_core_reg_write(priv, CORE_GSWPLL_GRP2, (1 << RG_GSWPLL_POSDIV_500M_S) | (25 << RG_GSWPLL_FBKDIV_500M_S)); /* Enable MT7530 PLL */ - mt7530_core_reg_write(priv, CORE_GSWPLL_GRP1, + mt753x_core_reg_write(priv, CORE_GSWPLL_GRP1, (2 << RG_GSWPLL_POSDIV_200M_S) | (32 << RG_GSWPLL_FBKDIV_200M_S) | RG_GSWPLL_EN_PRE); udelay(20); - mt7530_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); + mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); /* Setup the MT7530 TRGMII Tx Clock */ - mt7530_core_reg_write(priv, CORE_PLL_GROUP5, ncpo1); - mt7530_core_reg_write(priv, CORE_PLL_GROUP6, 0); - mt7530_core_reg_write(priv, CORE_PLL_GROUP10, ssc_delta); - mt7530_core_reg_write(priv, CORE_PLL_GROUP11, ssc_delta); - mt7530_core_reg_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN | + mt753x_core_reg_write(priv, CORE_PLL_GROUP5, ncpo1); + mt753x_core_reg_write(priv, CORE_PLL_GROUP6, 0); + mt753x_core_reg_write(priv, CORE_PLL_GROUP10, ssc_delta); + mt753x_core_reg_write(priv, CORE_PLL_GROUP11, ssc_delta); + mt753x_core_reg_write(priv, CORE_PLL_GROUP4, RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN); - mt7530_core_reg_write(priv, CORE_PLL_GROUP2, + mt753x_core_reg_write(priv, CORE_PLL_GROUP2, RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | (1 << RG_SYSPLL_POSDIV_S)); - mt7530_core_reg_write(priv, CORE_PLL_GROUP7, + mt753x_core_reg_write(priv, CORE_PLL_GROUP7, RG_LCDDS_PCW_NCPO_CHG | (3 << RG_LCCDS_C_S) | RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); /* Enable MT7530 core clock */ - mt7530_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, + mt753x_core_reg_write(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN | REG_TRGMIICK_EN); return 0; @@ -551,46 +671,33 @@ static int mt7530_setup(struct mtk_eth_priv *priv) mtk_ethsys_rmw(priv, ETHSYS_CLKCFG0_REG, ETHSYS_TRGMII_CLK_SEL362_5, 0); - /* Global reset switch */ - if (priv->mcm) { - reset_assert(&priv->rst_mcm); - udelay(1000); - reset_deassert(&priv->rst_mcm); - mdelay(1000); - } else if (dm_gpio_is_valid(&priv->rst_gpio)) { - dm_gpio_set_value(&priv->rst_gpio, 0); - udelay(1000); - dm_gpio_set_value(&priv->rst_gpio, 1); - mdelay(1000); - } - /* Modify HWTRAP first to allow direct access to internal PHYs */ - mt7530_reg_read(priv, HWTRAP_REG, &val); + mt753x_reg_read(priv, HWTRAP_REG, &val); val |= CHG_TRAP; val &= ~C_MDIO_BPS; - mt7530_reg_write(priv, MHWTRAP_REG, val); + mt753x_reg_write(priv, MHWTRAP_REG, val); /* Calculate the phy base address */ val = ((val & SMI_ADDR_M) >> SMI_ADDR_S) << 3; - priv->mt7530_phy_base = (val | 0x7) + 1; + priv->mt753x_phy_base = (val | 0x7) + 1; /* Turn off PHYs */ - for (i = 0; i < MT7530_NUM_PHYS; i++) { - phy_addr = MT7530_PHY_ADDR(priv->mt7530_phy_base, i); + for (i = 0; i < MT753X_NUM_PHYS; i++) { + phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i); phy_val = priv->mii_read(priv, phy_addr, MII_BMCR); phy_val |= BMCR_PDOWN; priv->mii_write(priv, phy_addr, MII_BMCR, phy_val); } /* Force MAC link down before reset */ - mt7530_reg_write(priv, PCMR_REG(5), FORCE_MODE); - mt7530_reg_write(priv, PCMR_REG(6), FORCE_MODE); + mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE); + mt753x_reg_write(priv, PMCR_REG(6), FORCE_MODE); /* MT7530 reset */ - mt7530_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST); + mt753x_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST); udelay(100); - val = (1 << IPG_CFG_S) | + val = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | MAC_MODE | FORCE_MODE | MAC_TX_EN | MAC_RX_EN | BKOFF_EN | BACKPR_EN | @@ -598,53 +705,280 @@ static int mt7530_setup(struct mtk_eth_priv *priv) FORCE_DPX | FORCE_LINK; /* MT7530 Port6: Forced 1000M/FD, FC disabled */ - mt7530_reg_write(priv, PCMR_REG(6), val); + mt753x_reg_write(priv, PMCR_REG(6), val); /* MT7530 Port5: Forced link down */ - mt7530_reg_write(priv, PCMR_REG(5), FORCE_MODE); + mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE); /* MT7530 Port6: Set to RGMII */ - mt7530_reg_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_M, P6_INTF_MODE_RGMII); + mt753x_reg_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_M, P6_INTF_MODE_RGMII); /* Hardware Trap: Enable Port6, Disable Port5 */ - mt7530_reg_read(priv, HWTRAP_REG, &val); + mt753x_reg_read(priv, HWTRAP_REG, &val); val |= CHG_TRAP | LOOPDET_DIS | P5_INTF_DIS | (P5_INTF_SEL_GMAC5 << P5_INTF_SEL_S) | (P5_INTF_MODE_RGMII << P5_INTF_MODE_S); val &= ~(C_MDIO_BPS | P6_INTF_DIS); - mt7530_reg_write(priv, MHWTRAP_REG, val); + mt753x_reg_write(priv, MHWTRAP_REG, val); /* Setup switch core pll */ mt7530_pad_clk_setup(priv, priv->phy_interface); /* Lower Tx Driving for TRGMII path */ for (i = 0 ; i < NUM_TRGMII_CTRL ; i++) - mt7530_reg_write(priv, MT7530_TRGMII_TD_ODT(i), + mt753x_reg_write(priv, MT7530_TRGMII_TD_ODT(i), (8 << TD_DM_DRVP_S) | (8 << TD_DM_DRVN_S)); for (i = 0 ; i < NUM_TRGMII_CTRL; i++) - mt7530_reg_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_M, 16); + mt753x_reg_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_M, 16); + + /* Turn on PHYs */ + for (i = 0; i < MT753X_NUM_PHYS; i++) { + phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i); + phy_val = priv->mii_read(priv, phy_addr, MII_BMCR); + phy_val &= ~BMCR_PDOWN; + priv->mii_write(priv, phy_addr, MII_BMCR, phy_val); + } + + return 0; +} + +static void mt7531_core_pll_setup(struct mtk_eth_priv *priv, int mcm) +{ + /* Step 1 : Disable MT7531 COREPLL */ + mt753x_reg_rmw(priv, MT7531_PLLGP_EN, EN_COREPLL, 0); + + /* Step 2: switch to XTAL output */ + mt753x_reg_rmw(priv, MT7531_PLLGP_EN, SW_CLKSW, SW_CLKSW); + + mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_EN, 0); + + /* Step 3: disable PLLGP and enable program PLLGP */ + mt753x_reg_rmw(priv, MT7531_PLLGP_EN, SW_PLLGP, SW_PLLGP); + + /* Step 4: program COREPLL output frequency to 500MHz */ + mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_POSDIV_M, + 2 << RG_COREPLL_POSDIV_S); + udelay(25); + + /* Currently, support XTAL 25Mhz only */ + mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_M, + 0x140000 << RG_COREPLL_SDM_PCW_S); + + /* Set feedback divide ratio update signal to high */ + mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_CHG, + RG_COREPLL_SDM_PCW_CHG); + + /* Wait for at least 16 XTAL clocks */ + udelay(10); + + /* Step 5: set feedback divide ratio update signal to low */ + mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_SDM_PCW_CHG, 0); + + /* add enable 325M clock for SGMII */ + mt753x_reg_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000); + + /* add enable 250SSC clock for RGMII */ + mt753x_reg_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000); + + /*Step 6: Enable MT7531 PLL */ + mt753x_reg_rmw(priv, MT7531_PLLGP_CR0, RG_COREPLL_EN, RG_COREPLL_EN); + + mt753x_reg_rmw(priv, MT7531_PLLGP_EN, EN_COREPLL, EN_COREPLL); + + udelay(25); +} + +static int mt7531_port_sgmii_init(struct mtk_eth_priv *priv, + u32 port) +{ + if (port != 5 && port != 6) { + printf("mt7531: port %d is not a SGMII port\n", port); + return -EINVAL; + } + + /* Set SGMII GEN2 speed(2.5G) */ + mt753x_reg_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port), + SGMSYS_SPEED_2500, SGMSYS_SPEED_2500); + + /* Disable SGMII AN */ + mt753x_reg_rmw(priv, MT7531_PCS_CONTROL_1(port), + SGMII_AN_ENABLE, 0); + + /* SGMII force mode setting */ + mt753x_reg_write(priv, MT7531_SGMII_MODE(port), SGMII_FORCE_MODE); + + /* Release PHYA power down state */ + mt753x_reg_rmw(priv, MT7531_QPHY_PWR_STATE_CTRL(port), + SGMII_PHYA_PWD, 0); + + return 0; +} + +static int mt7531_port_rgmii_init(struct mtk_eth_priv *priv, u32 port) +{ + u32 val; + + if (port != 5) { + printf("error: RGMII mode is not available for port %d\n", + port); + return -EINVAL; + } + + mt753x_reg_read(priv, MT7531_CLKGEN_CTRL, &val); + val |= GP_CLK_EN; + val &= ~GP_MODE_M; + val |= GP_MODE_RGMII << GP_MODE_S; + val |= TXCLK_NO_REVERSE; + val |= RXCLK_NO_DELAY; + val &= ~CLK_SKEW_IN_M; + val |= CLK_SKEW_IN_NO_CHANGE << CLK_SKEW_IN_S; + val &= ~CLK_SKEW_OUT_M; + val |= CLK_SKEW_OUT_NO_CHANGE << CLK_SKEW_OUT_S; + mt753x_reg_write(priv, MT7531_CLKGEN_CTRL, val); + + return 0; +} + +static void mt7531_phy_setting(struct mtk_eth_priv *priv) +{ + int i; + u32 val; + + for (i = 0; i < MT753X_NUM_PHYS; i++) { + /* Enable HW auto downshift */ + priv->mii_write(priv, i, 0x1f, 0x1); + val = priv->mii_read(priv, i, PHY_EXT_REG_14); + val |= PHY_EN_DOWN_SHFIT; + priv->mii_write(priv, i, PHY_EXT_REG_14, val); + + /* PHY link down power saving enable */ + val = priv->mii_read(priv, i, PHY_EXT_REG_17); + val |= PHY_LINKDOWN_POWER_SAVING_EN; + priv->mii_write(priv, i, PHY_EXT_REG_17, val); + + val = priv->mmd_read(priv, i, 0x1e, PHY_DEV1E_REG_0C6); + val &= ~PHY_POWER_SAVING_M; + val |= PHY_POWER_SAVING_TX << PHY_POWER_SAVING_S; + priv->mmd_write(priv, i, 0x1e, PHY_DEV1E_REG_0C6, val); + } +} + +static int mt7531_setup(struct mtk_eth_priv *priv) +{ + u16 phy_addr, phy_val; + u32 val; + u32 pmcr; + u32 port5_sgmii; + int i; + + priv->mt753x_phy_base = (priv->mt753x_smi_addr + 1) & + MT753X_SMI_ADDR_MASK; + + /* Turn off PHYs */ + for (i = 0; i < MT753X_NUM_PHYS; i++) { + phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i); + phy_val = priv->mii_read(priv, phy_addr, MII_BMCR); + phy_val |= BMCR_PDOWN; + priv->mii_write(priv, phy_addr, MII_BMCR, phy_val); + } + + /* Force MAC link down before reset */ + mt753x_reg_write(priv, PMCR_REG(5), FORCE_MODE_LNK); + mt753x_reg_write(priv, PMCR_REG(6), FORCE_MODE_LNK); + + /* Switch soft reset */ + mt753x_reg_write(priv, SYS_CTRL_REG, SW_SYS_RST | SW_REG_RST); + udelay(100); + + /* Enable MDC input Schmitt Trigger */ + mt753x_reg_rmw(priv, MT7531_SMT0_IOLB, SMT_IOLB_5_SMI_MDC_EN, + SMT_IOLB_5_SMI_MDC_EN); + + mt7531_core_pll_setup(priv, priv->mcm); + + mt753x_reg_read(priv, MT7531_TOP_SIG_SR, &val); + port5_sgmii = !!(val & PAD_DUAL_SGMII_EN); + + /* port5 support either RGMII or SGMII, port6 only support SGMII. */ + switch (priv->phy_interface) { + case PHY_INTERFACE_MODE_RGMII: + if (!port5_sgmii) + mt7531_port_rgmii_init(priv, 5); + break; + case PHY_INTERFACE_MODE_SGMII: + mt7531_port_sgmii_init(priv, 6); + if (port5_sgmii) + mt7531_port_sgmii_init(priv, 5); + break; + default: + break; + } + + pmcr = MT7531_FORCE_MODE | + (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | + MAC_MODE | MAC_TX_EN | MAC_RX_EN | + BKOFF_EN | BACKPR_EN | + FORCE_RX_FC | FORCE_TX_FC | + (SPEED_1000M << FORCE_SPD_S) | FORCE_DPX | + FORCE_LINK; + + mt753x_reg_write(priv, PMCR_REG(5), pmcr); + mt753x_reg_write(priv, PMCR_REG(6), pmcr); /* Turn on PHYs */ - for (i = 0; i < MT7530_NUM_PHYS; i++) { - phy_addr = MT7530_PHY_ADDR(priv->mt7530_phy_base, i); + for (i = 0; i < MT753X_NUM_PHYS; i++) { + phy_addr = MT753X_PHY_ADDR(priv->mt753x_phy_base, i); phy_val = priv->mii_read(priv, phy_addr, MII_BMCR); phy_val &= ~BMCR_PDOWN; priv->mii_write(priv, phy_addr, MII_BMCR, phy_val); } + mt7531_phy_setting(priv); + + /* Enable Internal PHYs */ + val = mt753x_core_reg_read(priv, CORE_PLL_GROUP4); + val |= MT7531_BYPASS_MODE; + val &= ~MT7531_POWER_ON_OFF; + mt753x_core_reg_write(priv, CORE_PLL_GROUP4, val); + + return 0; +} + +int mt753x_switch_init(struct mtk_eth_priv *priv) +{ + int ret; + int i; + + /* Global reset switch */ + if (priv->mcm) { + reset_assert(&priv->rst_mcm); + udelay(1000); + reset_deassert(&priv->rst_mcm); + mdelay(1000); + } else if (dm_gpio_is_valid(&priv->rst_gpio)) { + dm_gpio_set_value(&priv->rst_gpio, 0); + udelay(1000); + dm_gpio_set_value(&priv->rst_gpio, 1); + mdelay(1000); + } + + ret = priv->switch_init(priv); + if (ret) + return ret; + /* Set port isolation */ - for (i = 0; i < 8; i++) { + for (i = 0; i < MT753X_NUM_PORTS; i++) { /* Set port matrix mode */ if (i != 6) - mt7530_reg_write(priv, PCR_REG(i), + mt753x_reg_write(priv, PCR_REG(i), (0x40 << PORT_MATRIX_S)); else - mt7530_reg_write(priv, PCR_REG(i), + mt753x_reg_write(priv, PCR_REG(i), (0x3f << PORT_MATRIX_S)); /* Set port mode to user port */ - mt7530_reg_write(priv, PVC_REG(i), + mt753x_reg_write(priv, PVC_REG(i), (0x8100 << STAG_VPID_S) | (VLAN_ATTR_USER << VLAN_ATTR_S)); } @@ -658,7 +992,7 @@ static void mtk_phy_link_adjust(struct mtk_eth_priv *priv) u8 flowctrl; u32 mcr; - mcr = (1 << IPG_CFG_S) | + mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | (MAC_RX_PKT_LEN_1536 << MAC_RX_PKT_LEN_S) | MAC_MODE | FORCE_MODE | MAC_TX_EN | MAC_RX_EN | @@ -803,7 +1137,7 @@ static void mtk_mac_init(struct mtk_eth_priv *priv) ge_mode << SYSCFG0_GE_MODE_S(priv->gmac_id)); if (priv->force_mode) { - mcr = (1 << IPG_CFG_S) | + mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | (MAC_RX_PKT_LEN_1536 << MAC_RX_PKT_LEN_S) | MAC_MODE | FORCE_MODE | MAC_TX_EN | MAC_RX_EN | @@ -1050,7 +1384,7 @@ static int mtk_eth_probe(struct udevice *dev) return mtk_phy_probe(dev); /* Initialize switch */ - return priv->switch_init(priv); + return mt753x_switch_init(priv); } static int mtk_eth_remove(struct udevice *dev) @@ -1159,7 +1493,11 @@ static int mtk_eth_ofdata_to_platdata(struct udevice *dev) if (!strcmp(str, "mt7530")) { priv->sw = SW_MT7530; priv->switch_init = mt7530_setup; - priv->mt7530_smi_addr = MT7530_DFL_SMI_ADDR; + priv->mt753x_smi_addr = MT753X_DFL_SMI_ADDR; + } else if (!strcmp(str, "mt7531")) { + priv->sw = SW_MT7531; + priv->switch_init = mt7531_setup; + priv->mt753x_smi_addr = MT753X_DFL_SMI_ADDR; } else { printf("error: unsupported switch\n"); return -EINVAL; diff --git a/drivers/net/mtk_eth.h b/drivers/net/mtk_eth.h index 9bb037d440..f2940c9996 100644 --- a/drivers/net/mtk_eth.h +++ b/drivers/net/mtk_eth.h @@ -34,7 +34,9 @@ /* SGMII subsystem config registers */ #define SGMSYS_PCS_CONTROL_1 0x0 +#define SGMII_LINK_STATUS BIT(18) #define SGMII_AN_ENABLE BIT(12) +#define SGMII_AN_RESTART BIT(9) #define SGMSYS_SGMII_MODE 0x20 #define SGMII_FORCE_MODE 0x31120019 @@ -139,6 +141,11 @@ #define FORCE_DPX BIT(1) #define FORCE_LINK BIT(0) +/* Values of IPG_CFG */ +#define IPG_96BIT 0 +#define IPG_96BIT_WITH_SHORT_IPG 1 +#define IPG_64BIT 2 + /* MAC_RX_PKT_LEN: Max RX packet length */ #define MAC_RX_PKT_LEN_1518 0 #define MAC_RX_PKT_LEN_1536 1 @@ -178,17 +185,73 @@ #define VLAN_ATTR_TRANSLATION 2 #define VLAN_ATTR_TRANSPARENT 3 -#define PCMR_REG(p) (0x3000 + (p) * 0x100) -/* XXX: all fields are defined under GMAC_PORT_MCR */ - +#define PMCR_REG(p) (0x3000 + (p) * 0x100) +/* XXX: all fields of MT7530 are defined under GMAC_PORT_MCR + * MT7531 specific fields are defined below + */ +#define FORCE_MODE_EEE1G BIT(25) +#define FORCE_MODE_EEE100 BIT(26) +#define FORCE_MODE_TX_FC BIT(27) +#define FORCE_MODE_RX_FC BIT(28) +#define FORCE_MODE_DPX BIT(29) +#define FORCE_MODE_SPD BIT(30) +#define FORCE_MODE_LNK BIT(31) +#define MT7531_FORCE_MODE FORCE_MODE_EEE1G | FORCE_MODE_EEE100 |\ + FORCE_MODE_TX_FC | FORCE_MODE_RX_FC | \ + FORCE_MODE_DPX | FORCE_MODE_SPD | \ + FORCE_MODE_LNK + +/* MT7531 SGMII Registers */ +#define MT7531_SGMII_REG_BASE 0x5000 +#define MT7531_SGMII_REG_PORT_BASE 0x1000 +#define MT7531_SGMII_REG(p, r) (MT7531_SGMII_REG_BASE + \ + (p) * MT7531_SGMII_REG_PORT_BASE + (r)) +#define MT7531_PCS_CONTROL_1(p) MT7531_SGMII_REG(((p) - 5), 0x00) +#define MT7531_SGMII_MODE(p) MT7531_SGMII_REG(((p) - 5), 0x20) +#define MT7531_QPHY_PWR_STATE_CTRL(p) MT7531_SGMII_REG(((p) - 5), 0xe8) +#define MT7531_PHYA_CTRL_SIGNAL3(p) MT7531_SGMII_REG(((p) - 5), 0x128) +/* XXX: all fields of MT7531 SGMII are defined under SGMSYS */ + +/* MT753x System Control Register */ #define SYS_CTRL_REG 0x7000 #define SW_PHY_RST BIT(2) #define SW_SYS_RST BIT(1) #define SW_REG_RST BIT(0) -#define NUM_TRGMII_CTRL 5 +/* MT7531 */ +#define MT7531_PHY_IAC 0x701c +/* XXX: all fields are defined under GMAC_PIAC_REG */ + +#define MT7531_CLKGEN_CTRL 0x7500 +#define CLK_SKEW_OUT_S 8 +#define CLK_SKEW_OUT_M 0x300 +#define CLK_SKEW_IN_S 6 +#define CLK_SKEW_IN_M 0xc0 +#define RXCLK_NO_DELAY BIT(5) +#define TXCLK_NO_REVERSE BIT(4) +#define GP_MODE_S 1 +#define GP_MODE_M 0x06 +#define GP_CLK_EN BIT(0) + +/* Values of GP_MODE */ +#define GP_MODE_RGMII 0 +#define GP_MODE_MII 1 +#define GP_MODE_REV_MII 2 + +/* Values of CLK_SKEW_IN */ +#define CLK_SKEW_IN_NO_CHANGE 0 +#define CLK_SKEW_IN_DELAY_100PPS 1 +#define CLK_SKEW_IN_DELAY_200PPS 2 +#define CLK_SKEW_IN_REVERSE 3 + +/* Values of CLK_SKEW_OUT */ +#define CLK_SKEW_OUT_NO_CHANGE 0 +#define CLK_SKEW_OUT_DELAY_100PPS 1 +#define CLK_SKEW_OUT_DELAY_200PPS 2 +#define CLK_SKEW_OUT_REVERSE 3 #define HWTRAP_REG 0x7800 +/* MT7530 Modified Hardware Trap Status Registers */ #define MHWTRAP_REG 0x7804 #define CHG_TRAP BIT(16) #define LOOPDET_DIS BIT(14) @@ -222,6 +285,8 @@ #define P6_INTF_MODE_RGMII 0 #define P6_INTF_MODE_TRGMII 1 +#define NUM_TRGMII_CTRL 5 + #define MT7530_TRGMII_RD(n) (0x7a10 + (n) * 8) #define RD_TAP_S 0 #define RD_TAP_M 0x7f @@ -229,8 +294,34 @@ #define MT7530_TRGMII_TD_ODT(n) (0x7a54 + (n) * 8) /* XXX: all fields are defined under GMAC_TRGMII_TD_ODT */ -/* MT7530 GPHY MDIO Indirect Access Registers */ +/* TOP Signals Status Register */ +#define MT7531_TOP_SIG_SR 0x780c +#define PAD_MCM_SMI_EN BIT(0) +#define PAD_DUAL_SGMII_EN BIT(1) + +/* MT7531 PLLGP Registers */ +#define MT7531_PLLGP_EN 0x7820 +#define EN_COREPLL BIT(2) +#define SW_CLKSW BIT(1) +#define SW_PLLGP BIT(0) + +#define MT7531_PLLGP_CR0 0x78a8 +#define RG_COREPLL_EN BIT(22) +#define RG_COREPLL_POSDIV_S 23 +#define RG_COREPLL_POSDIV_M 0x3800000 +#define RG_COREPLL_SDM_PCW_S 1 +#define RG_COREPLL_SDM_PCW_M 0x3ffffe +#define RG_COREPLL_SDM_PCW_CHG BIT(0) + +/* MT7531 RGMII and SGMII PLL clock */ +#define MT7531_ANA_PLLGP_CR2 0x78b0 +#define MT7531_ANA_PLLGP_CR5 0x78bc + +/* MT7531 GPIO GROUP IOLB SMT0 Control */ +#define MT7531_SMT0_IOLB 0x7f04 +#define SMT_IOLB_5_SMI_MDC_EN BIT(5) +/* MT7530 GPHY MDIO Indirect Access Registers */ #define MII_MMD_ACC_CTL_REG 0x0d #define MMD_CMD_S 14 #define MMD_CMD_M 0xc000 @@ -246,7 +337,6 @@ #define MII_MMD_ADDR_DATA_REG 0x0e /* MT7530 GPHY MDIO MMD Registers */ - #define CORE_PLL_GROUP2 0x401 #define RG_SYSPLL_EN_NORMAL BIT(15) #define RG_SYSPLL_VODEN BIT(14) @@ -254,6 +344,8 @@ #define RG_SYSPLL_POSDIV_M 0x60 #define CORE_PLL_GROUP4 0x403 +#define MT7531_BYPASS_MODE BIT(4) +#define MT7531_POWER_ON_OFF BIT(5) #define RG_SYSPLL_DDSFBK_EN BIT(12) #define RG_SYSPLL_BIAS_EN BIT(11) #define RG_SYSPLL_BIAS_LPF_EN BIT(10) @@ -298,4 +390,24 @@ #define REG_GSWCK_EN BIT(0) #define REG_TRGMIICK_EN BIT(1) +/* Extend PHY Control Register 3 */ +#define PHY_EXT_REG_14 0x14 + +/* Fields of PHY_EXT_REG_14 */ +#define PHY_EN_DOWN_SHFIT BIT(4) + +/* Extend PHY Control Register 4 */ +#define PHY_EXT_REG_17 0x17 + +/* Fields of PHY_EXT_REG_17 */ +#define PHY_LINKDOWN_POWER_SAVING_EN BIT(4) + +/* PHY RXADC Control Register 7 */ +#define PHY_DEV1E_REG_0C6 0x0c6 + +/* Fields of PHY_DEV1E_REG_0C6 */ +#define PHY_POWER_SAVING_S 8 +#define PHY_POWER_SAVING_M 0x300 +#define PHY_POWER_SAVING_TX 0x0 + #endif /* _MTK_ETH_H_ */