arm: kirkwood: add ZyXEL NSA310 device This patch add ZyXEL NSA310 1-Bay Media Server The ZyXEL NSA310 device is a Kirkwood based NAS: - SoC: Marvell 88F6702 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - Gigabit ethernet: PHY Realtek - Flash memory: 128MB - 1 Power button - 1 Power LED (blue) - 5 Status LED (green/red) - 1 Copy/Sync button - 1 Reset button - 2 SATA II port (1 internal and 1 external eSata) - 2 USB 2.0 ports (1 front and 1 back) - Smart fan Signed-off-by: Alberto Bursi NOTE: this patch is ready for upstream, LEDE-specific parts are in another patch --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -53,6 +53,9 @@ config TARGET_GOFLEXHOME config TARGET_NAS220 bool "BlackArmor NAS220" +config TARGET_NSA310 + bool "Zyxel NSA310 Board" + config TARGET_NSA310S bool "Zyxel NSA310S" @@ -86,6 +89,7 @@ source "board/raidsonic/ib62x0/Kconfig" source "board/Seagate/dockstar/Kconfig" source "board/Seagate/goflexhome/Kconfig" source "board/Seagate/nas220/Kconfig" +source "board/zyxel/nsa310/Kconfig" source "board/zyxel/nsa310s/Kconfig" source "board/alliedtelesis/SBx81LIFKW/Kconfig" source "board/alliedtelesis/SBx81LIFXCAT/Kconfig" --- /dev/null +++ b/board/zyxel/nsa310/Kconfig @@ -0,0 +1,12 @@ +if TARGET_NSA310 + +config SYS_BOARD + default "nsa310" + +config SYS_VENDOR + default "zyxel" + +config SYS_CONFIG_NAME + default "nsa310" + +endif --- /dev/null +++ b/board/zyxel/nsa310/MAINTAINERS @@ -0,0 +1,6 @@ +NSA310 BOARD +M: Alberto Bursi +S: Maintained +F: board/zyxel/nsa310/ +F: include/configs/nsa310.h +F: configs/nsa310_defconfig --- /dev/null +++ b/board/zyxel/nsa310/Makefile @@ -0,0 +1,12 @@ +# +# (C) Copyright 2015 bodhi +# +# Based on +# (C) Copyright 2009 +# Marvell Semiconductor +# Written-by: Prafulla Wadaskar +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := nsa310.o --- /dev/null +++ b/board/zyxel/nsa310/kwbimage.cfg @@ -0,0 +1,166 @@ +# +# Copyright (C) 2013 Rafal Kazmierowski +# +# Based on guruplug.c originally written by +# Siddarth Gore +# (C) Copyright 2009 +# Marvell Semiconductor +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand +#BOOT_FROM uart +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0800 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1b1b1b9b + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43010c30 # DDR Configuration register +# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x37543000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) +# bit3-0: TRAS lsbs +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x0000000c # DDR Address Control +# bit1-0: 01, Cs0width=x8 +# bit3-2: 10, Cs0size=1Gb +# bit5-4: 01, Cs1width=x8 +# bit7-6: 10, Cs1size=1Gb +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000652 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000004 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 0, DDR ODT control lsd (disabled) +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, (disabled) +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F17F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 0 +# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) + + +DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size +#DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x0F, Size (i.e. 256MB) + +DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb +DATA 0xFFD0150C 0x00000000 # CS[2]n Size, window disabled KAZ z 400db +DATA 0xFFD01514 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD0151C 0x00000000 # DDR ODT Control (Low) +DATA 0xFFD01494 0x00120012 # DDR ODT Control (High) KAZ z nowy STATIC_SDRAM_ODT_CTRL_LOW +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD01498 0x00000000 # CPU ODT Control KAZ STATIC_SDRAM_ODT_CTRL_HI +DATA 0xFFD0149C 0x0000E403 # DDR Initialization Control KAZ STATIC_SDRAM_DUNIT_ODT_CTRL +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 --- /dev/null +++ b/board/zyxel/nsa310/nsa310.c @@ -0,0 +1,190 @@ +/* + * Copyright (C) 2013 Rafal Kazmierowski + * + * Based on NSA320.c Peter Schildmann + * originally written by + * Marvell Semiconductor + * Written-by: Prafulla Wadaskar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include "nsa310.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + /* + * default gpio configuration + * There are maximum 64 gpios controlled through 2 sets of registers + * the below configuration configures mainly initial LED status + */ + mvebu_config_gpio(NSA310_VAL_LOW, NSA310_VAL_HIGH, + NSA310_OE_LOW, NSA310_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + /* (all LEDs & power off active high) */ + static const u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, + MPP8_TW_SDA, /* PCF8563 RTC chip */ + MPP9_TW_SCK, /* connected to TWSI */ + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* SATA2 LED (green) */ + MPP13_GPIO, /* SATA2 LED (red) */ + MPP14_GPIO, /* MCU DATA pin (in) */ + MPP15_GPIO, /* USB LED (green) */ + MPP16_GPIO, /* MCU CLK pin (out) */ + MPP17_GPIO, /* MCU ACT pin (out) */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, + MPP21_GPIO, /* USB LED (red)-Power*/ + MPP22_GPIO, + MPP23_GPIO, + MPP24_GPIO, + MPP25_GPIO, + MPP26_GPIO, + MPP27_GPIO, + MPP28_GPIO, /* SYS LED (green) */ + MPP29_GPIO, /* SYS LED (red) */ + MPP30_GPIO, + MPP31_GPIO, + MPP32_GPIO, + MPP33_GPIO, + MPP34_GPIO, + MPP35_GPIO, + MPP36_GPIO, /* Reset button */ + MPP37_GPIO, /* Copy button */ + MPP38_GPIO, /* VID B0 */ + MPP39_GPIO, /* COPY LED (green) */ + MPP40_GPIO, /* COPY LED (red) */ + MPP41_GPIO, /* SATA1 LED (green) */ + MPP42_GPIO, /* SATA1 LED (red) */ + MPP43_GPIO, /* HTP pin */ + MPP44_GPIO, /* Buzzer */ + MPP45_GPIO, /* VID B1 */ + MPP46_GPIO, /* Power button */ + MPP47_GPIO, /* Power resume data */ + MPP48_GPIO, /* Power off */ + MPP49_GPIO, /* Power resume clock */ + 0 + }; + kirkwood_mpp_conf(kwmpp_config,NULL); + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +/* Configure and enable MV88E1318 PHY */ +void reset_phy(void) +{ + u16 reg; + u16 devadr; + char *name = "egiga0"; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { + printf("Err..%s could not read PHY dev address\n", + __FUNCTION__); + return; + } + + /* Set RGMII delay */ + miiphy_write(name, devadr, MV88E1318_PGADR_REG, 2); + miiphy_read(name, devadr, MV88E1318_MAC_CTRL_REG, ®); + reg |= (MV88E1318_RGMII_RXTM_CTRL | MV88E1318_RGMII_TXTM_CTRL); + miiphy_write(name, devadr, MV88E1318_MAC_CTRL_REG, reg); + miiphy_write(name, devadr, MV88E1318_PGADR_REG, 0); + + /* reset the phy */ + miiphy_reset(name, devadr); + + printf("MV88E1318 PHY initialized on %s\n", name); +} +#endif /* CONFIG_RESET_PHY_R */ + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +void show_boot_progress(int val) +{ + struct kwgpio_registers *gpio0 = (struct kwgpio_registers *)MVEBU_GPIO0_BASE; + u32 dout0 = readl(&gpio0->dout); + u32 blen0 = readl(&gpio0->blink_en); + + struct kwgpio_registers *gpio1 = (struct kwgpio_registers *)MVEBU_GPIO1_BASE; + u32 dout1 = readl(&gpio1->dout); + u32 blen1 = readl(&gpio1->blink_en); + + switch (val) { + case BOOTSTAGE_ID_DECOMP_IMAGE: + writel(blen0 & ~(SYS_GREEN_LED | SYS_RED_LED), &gpio0->blink_en); + writel((dout0 & ~SYS_GREEN_LED) | SYS_RED_LED, &gpio0->dout); + break; + case BOOTSTAGE_ID_RUN_OS: + writel(dout0 & ~SYS_RED_LED, &gpio0->dout); + writel(blen0 | SYS_GREEN_LED, &gpio0->blink_en); + break; + case BOOTSTAGE_ID_NET_START: + writel(dout1 & ~COPY_RED_LED, &gpio1->dout); + writel((blen1 & ~COPY_RED_LED) | COPY_GREEN_LED, &gpio1->blink_en); + break; + case BOOTSTAGE_ID_NET_LOADED: + writel(blen1 & ~(COPY_RED_LED | COPY_GREEN_LED), &gpio1->blink_en); + writel((dout1 & ~COPY_RED_LED) | COPY_GREEN_LED, &gpio1->dout); + break; + case -BOOTSTAGE_ID_NET_NETLOOP_OK: + case -BOOTSTAGE_ID_NET_LOADED: + writel(dout1 & ~COPY_GREEN_LED, &gpio1->dout); + writel((blen1 & ~COPY_GREEN_LED) | COPY_RED_LED, &gpio1->blink_en); + break; + default: + if (val < 0) { + /* error */ + printf("Error occured, error code = %d\n", -val); + writel(dout0 & ~SYS_GREEN_LED, &gpio0->dout); + writel(blen0 | SYS_RED_LED, &gpio0->blink_en); + } + break; + } +} +#endif --- /dev/null +++ b/board/zyxel/nsa310/nsa310.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2013 Rafal Kazmierowski + * + * Based on Peter Schildmann + * and guruplug.h originally written by + * Siddarth Gore + * (C) Copyright 2009 + * Marvell Semiconductor + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __NSA310_H +#define __NSA310_H + +/* GPIO's */ +#define SYS_GREEN_LED (1 << 28) +#define SYS_RED_LED (1 << 29) +#define SATA1_GREEN_LED (1ULL << 41) +#define SATA1_RED_LED (1ULL << 42) +#define SATA2_GREEN_LED (1 << 12) +#define SATA2_RED_LED (1 << 13) +#define USB_GREEN_LED (1 << 15) +#define USB_RED_LED (1 << 21) +#define COPY_GREEN_LED (1ULL << 39) +#define COPY_RED_LED (1ULL << 40) + +#define NSA310_OE_LOW (0) +#define NSA310_VAL_LOW (SYS_GREEN_LED) +#define NSA310_OE_HIGH (((COPY_GREEN_LED | COPY_RED_LED | \ + SATA1_GREEN_LED | SATA1_RED_LED)) >> 32UL) +#define NSA310_VAL_HIGH (0) + +/* PHY related */ +#define MV88E1318_MAC_CTRL_REG 21 +#define MV88E1318_PGADR_REG 22 +#define MV88E1318_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1318_RGMII_RXTM_CTRL (1 << 5) + +#endif /* __NSA310_H */ --- /dev/null +++ b/configs/nsa310_defconfig @@ -0,0 +1,48 @@ +CONFIG_ARM=y +CONFIG_SYS_DCACHE_OFF=y +CONFIG_ARCH_CPU_INIT=y +CONFIG_KIRKWOOD=y +CONFIG_SYS_TEXT_BASE=0x600000 +CONFIG_TARGET_NSA310=y +CONFIG_IDENT_STRING="\nZyXEL NSA310 1-Bay Power Media Server" +CONFIG_NR_DRAM_BANKS=2 +CONFIG_BOOTDELAY=3 +CONFIG_SYS_PROMPT="NSA310> " +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_MVGBE=y +CONFIG_MII=y +CONFIG_SYS_NS16550=y +CONFIG_CMD_FDT=y +CONFIG_OF_LIBFDT=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_DNS=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_USB=y +CONFIG_CMD_DATE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_JFFS2=y +CONFIG_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x0c0000(uboot),0x80000(uboot_env),0x7ec0000(ubi)" +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_ENV=y +CONFIG_CMD_NAND=y +CONFIG_EFI_PARTITION=y +CONFIG_ENV_IS_IN_NAND=y +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_OFFSET=0xC0000 +CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_ENV_ADDR=0xC0000 +CONFIG_CMD_UBI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_LZMA=y +CONFIG_LZO=y +CONFIG_SYS_LONGHELP=y --- /dev/null +++ b/include/configs/nsa310.h @@ -0,0 +1,103 @@ +/* Copyright (C) 2015-2016 bodhi + * + * Based on + * Copyright (C) 2012 Peter Schildmann + * + * Based on guruplug.h originally written by + * Siddarth Gore + * (C) Copyright 2009 + * Marvell Semiconductor + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_NSA310_H +#define _CONFIG_NSA310_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KW88F6281 /* SOC Name */ + +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Misc Configuration Options + */ +#define CONFIG_SHOW_BOOT_PROGRESS 1 /* boot progess display (LED's) */ + +/* + * Commands configuration + */ +#define CONFIG_PREBOOT + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND \ + "ubi part ubi; " \ + "ubi read 0x800000 kernel; " \ + "bootm 0x800000" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS_DEFAULT "\0" \ + "bootargs_root=\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NETCONSOLE +#define CONFIG_NET_MULTI +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0x1 +#define CONFIG_RESET_PHY_R +#endif /* CONFIG_CMD_NET */ + +/* + * SATA Driver configuration + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET +#endif /* CONFIG_MVSATA_IDE */ + +/* + * File system + */ +#define CONFIG_JFFS2_NAND +#define CONFIG_JFFS2_LZO + +/* + * Date Time + */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +#endif /* _CONFIG_NSA310_H */