932bc8d5eb
ath9k: Allow configuration of LED polarity in platform data.
...
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 47910
9 years ago
4a4b0b82ec
ath9k: Pass LED polarity to ath_create_gpio_led when initializing the LEDs.
...
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 47909
9 years ago
6b04b44e21
mac80211: use the linux-firmware tree from 2015-12-07
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47822
9 years ago
3041fbb4d2
mac80211: fix passing of VHT80 in IBSS mode
...
The "iw" utility expects the VHT80 to be specified as uppercase "80MHZ",
change the script to reflect that.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47814
9 years ago
713f698bd4
mac80211: fix disabling HT in IBSS mode ( #21340 )
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47813
9 years ago
96a938d082
mac80211: fix build of mac80211-hwsim on kernel 4.4
...
This genl_notify() backport should not be applied for kernel 4.4.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47795
9 years ago
028666e75f
mac80211: Allow to select VHT80 in IBSS mode
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47781
9 years ago
8d580cd7f2
mac80211: Allow enabling tracing for the drivers that support it
...
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 47776
9 years ago
ba0ba1e1f5
mac80211: enable build with linux 4.4
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47772
9 years ago
70ac77f869
mac80211: update to 2015-12-03
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47771
9 years ago
418a9d4972
mac80211: put the !LINUX_4_4 dependency in the right place
...
Make sure all sub packages are marked as not building for 4.4.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47712
9 years ago
4454a3fb63
package: kernel: update dependencies for 4.4
...
Update dependencies for linux 4.4 and mark as broken where source code
needs updating.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47700
9 years ago
40a09b93d2
mac80211: install new firmware for ath9k-htc on target
...
For quite some time new firmware for ath9k-htc devices
is available in
http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ath9k_htc/
Moreover ath9k-htc kernel driver expects this new v1.4
firmware to exist in /lib/firmware/ath9k_htc.
What happens currently:
---------------------------->8--------------------------
[ 7.830000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 7.840000] usb 1-1: Direct firmware load for
ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[ 7.850000] usb 1-1: Falling back to user helper
[ 7.870000] usbcore: registered new interface driver ath9k_htc
[ 7.880000] firmware ath9k_htc!htc_9271-1.4.0.fw:
firmware_loading_store: map pages failed
[ 7.890000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[ 8.200000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size:
50980
[ 8.440000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[ 10.720000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[ 10.740000] ath9k_htc 1-1:1.0: FW RMW support: Off
[ 10.760000] ieee80211 phy0: Atheros AR9271 Rev:1
---------------------------->8--------------------------
And with that patch new firmware is used instead:
---------------------------->8--------------------------
[ 33.920000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 34.230000] usb 1-1: ath9k_htc: Transferred FW:
ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 34.480000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[ 34.740000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4
[ 34.750000] ath9k_htc 1-1:1.0: FW RMW support: On
---------------------------->8--------------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47693
9 years ago
48c709e86d
mac80211: rt2x00: fix WARN_ON_ONCE() caused by inbalanced set/clear of beacon enable bit
...
Signed-off-by: evaxige <evaxige@qq.com>
SVN-Revision: 47668
9 years ago
a4e234d278
ath10k: fix memory allocation issues on platforms where DMA coherent memory is constrained
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47625
9 years ago
27ac4ce928
mac80211: fix autoprobing of mt7601u driver
...
Strigng passed to autoprobing script should match
module's name. Currently that string is missing trailing "u".
With that change mt7601u driver really gets autoloaded on
USB Wi-Fi dongle insertion:
------------------>8---------------
[ 0.930000] hub 2-0:1.0: USB hub found
[ 0.940000] hub 2-0:1.0: 1 port detected
[ 1.150000] usb 1-1: new high-speed USB device number 2 using
ehci-platform
[ 1.720000] init: - preinit -
Detected arc-sdp // Synopsys AXS101 Development Board
[ 1.810000] random: mktemp urandom read with 3 bits of entropy
available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug
level
[ 4.940000] procd: - early -
[ 5.540000] procd: - ubus -
[ 6.550000] procd: - init -
Please press Enter to activate this console.
[ 7.160000] Loading modules backported from Linux version
master-2015-10-26-0-g28c26cb
[ 7.170000] Backport generated by backports.git
backports-20150903-4-g12cf266
[ 7.200000] cfg80211: World regulatory domain updated:
[ 7.230000] cfg80211: DFS Master region: unset
[ 7.230000] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.270000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.290000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 7.290000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 7.310000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz),
(N/A, 2000 mBm), (0 s)
[ 7.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz),
(N/A, 2000 mBm), (N/A)
[ 7.330000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz),
(N/A, 0 mBm), (N/A)
[ 7.470000] usb 1-1: reset high-speed USB device number 2 using
ehci-platform
[ 7.620000] mt7601u 1-1:1.0: ASIC revision: 76010001 MAC revision:
76010500
[ 7.630000] mt7601u 1-1:1.0: Firmware Version: 0.1.00 Build: 7640
Build time: 201302052146____
[ 8.040000] mt7601u 1-1:1.0: Warning: unsupported EEPROM version 0d
[ 8.050000] mt7601u 1-1:1.0: EEPROM ver:0d fae:00
[ 8.050000] mt7601u 1-1:1.0: EEPROM country region 01 (channels 1-13)
[ 8.320000] usbcore: registered new interface driver mt7601u
------------------>8---------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
SVN-Revision: 47556
9 years ago
988be54b22
ath10k: select kernel relayfs support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47548
9 years ago
b2dab45aa7
kernel: backport ssb changes from 4.4-rc1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47483
9 years ago
cb0c8da7c2
kernel: take bcm47xx_nvram.h from kernel and not backports
...
compat-wireless/backports now contains a bcm47xx_nvram.h file to
backport some of the functions in it which are used by the bcmfmac
driver. This file just checks for the kernel versions and provide an
empty implementations on older kernel versions. This is OK on most
systems, but on bcm47xx / bcm53xx systems we want to call the real
functions here. This commit removes the file from backports in our
build process like we do it with the bcma and ssb header files. Instead
we add a recent version into our kernel so all code uses only one
header file. On bcm47xx / bcm53xx the real implementations of this code
will be used.
Reported-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47467
9 years ago
d293f33558
mac80211: restricted automatic channel selection
...
Add a new config option "channels" for mac80211 wifi devices. It's only
valid if automatic channel selection is used and restricts the channel
selection to one of the given channels.
config wifi-device
list channels 1
list channels 6
list channels 11
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 47427
9 years ago
08f1e1b3ac
mac80211: set mcast-rate for mesh point interfaces
...
In order to set the multicast rate for mesh point interfaces the "mesh join"
was made explicit and moved to mac80211_setup_vif(), similar to how it is
done for IBSS interfaces.
Previously, the mesh join was made implicit in case authentication (i.e.
$key) was not used when creating the interface in mac80211_prepare_vif(),
while using authentication would create the interface first, then join
later in mac80211_setup_vif() by starting authsae.
Signed-off-by: Nils Schneider <nils@nilsschneider.net>
SVN-Revision: 47408
9 years ago
0afee71820
mac80211: disable a broken feature that was merged with the last update
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47402
9 years ago
356008e748
mac80211: fix kconf handling of allnoconfig, fixes spurious brcmfmac related build errors
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47371
9 years ago
7224c5d249
mac80211: fix crash when using mesh (11s) VIF together with another VIF
...
llid_in_use needs to be limited to stations of the same VIF, otherwise it
will cause a NULL deref as the sta_info of non-mesh-VIFs don't have
sta->mesh set.
Steps to reproduce:
modprobe mac80211_hwsim channels=2
iw phy phy0 interface add ibss0 type ibss
iw phy phy0 interface add mesh0 type mp
iw phy phy1 interface add ibss1 type ibss
iw phy phy1 interface add mesh1 type mp
ip link set ibss0 up
ip link set mesh0 up
ip link set ibss1 up
ip link set mesh1 up
iw dev ibss0 ibss join foo 2412
iw dev ibss1 ibss join foo 2412
# Ensure that ibss0 and ibss1 are actually associated; I often need to
# leave and join the cell on ibss1 a second time.
iw dev mesh0 mesh join bar
iw dev mesh1 mesh join bar # crash
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47364
9 years ago
8babf4654c
mac80211: update regulatory database to master-2015-10-22
...
Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>
SVN-Revision: 47297
9 years ago
3fd8621f62
ath10k: split out ath10k firmware into a separate source package and .ipk
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47294
9 years ago
ce09894398
mac80211: add pending ath9k/ath10k patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47287
9 years ago
ec3ee0969e
mac80211: update to wireless-testing 2015-10-26
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47286
9 years ago
42cad88e8f
mac80211: add a fix to initialize the tid field in the tx queue struct
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47142
9 years ago
439669b49c
mac80211: backport patch setting TX power in interface info
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47059
9 years ago
6e97442105
ath9k: fix handling of tx headroom for padding ( fixes #20556 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47042
9 years ago
528d38b4e9
mac80211: fix a few issues with fast-xmit support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47041
9 years ago
df190f4522
ath10k: remove API v2 firmware, it is no longer needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47009
9 years ago
69391f49b5
mac80211: add missing dependency for the hermes driver ( #20543 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46998
9 years ago
cb632b2d3b
mac80211: rename iwlagn to iwlwifi
...
follow upstream module rename
commit 3c607d27c818cf4a5d28f2c73b18a88f8fbdfa33
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46979
9 years ago
5650c28037
mac80211: cleanup sort
...
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46978
9 years ago
0d41307073
mac80211: cleanup remove net prefixes
...
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46977
9 years ago
3dc3275b38
mac80211: refresh patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46949
9 years ago
5fa9ed8c10
ath9k: enable hw manual peak calibration for QCA9561
...
This patch fix https://lists.openwrt.org/pipermail/openwrt-devel/
2015-August/034979.html. As the peak detect calibration is set
incorrectly.
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46948
9 years ago
42a3d7811f
mac80211/hostapd: rework 802.11w driver support selection, do not hardcode drivers in hostapd makefile
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46903
9 years ago
714f7080cf
ath10k: reduce dma burst size on newer firmware to fix crashes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46900
9 years ago
923dbc57cd
ath10k: make title for the old firmware config option more meaningful
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46895
9 years ago
eff877ee8c
mac80211: use wl18xx-fw-4.bin
...
The driver only supports wl18xx-fw-4.bin and does not support the old
firmware wl18xx-fw-3.bin and more.
The wl18xx-conf.bin file was removed upstream it does not fit all
devices any more, see this on how to generate one:
http://processors.wiki.ti.com/index.php/Open_Source_Wireless_Connectivity_wlconf
If someone has a config file for the common platforms with the wifi nic
OpenWrt uses please send a patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46887
9 years ago
f6a7c5bbc3
mac80211: add iwlagn debug options
...
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46886
9 years ago
f0916201d0
mac80211: refresh Intel firmware
...
- sort firmware
- add newer firmware for Intel chipsets
- newer Intel MVM require firmware
only compile tested
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46885
9 years ago
46137217c2
mac80211: iwlagn: enable iwlmvm
...
- reported in forums
- Intel 7260 and 3160 need IWLMVM drivers/firmware
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46884
9 years ago
688f1c905d
mac80211: update linux-firmware to 2014-09-03
...
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
[update to 2014-09-03 and change to xz]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46883
9 years ago
ad931fe512
mac80211: rt2800-usb: enable "unknown" USB IDs
...
- should fix issue: https://forum.openwrt.org/viewtopic.php?id=57315
- enable support of more USB stick with rt28xx chipsets
- experimental: USB-IDs not in vendor linux driver
- experimental: "exact chipset is unknown"
- experimental: "enabling these devices may or may not work"
only compile tested
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46882
9 years ago
e07959cade
package: replace ifconfig-usage with ip
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46832
9 years ago
e29efa2fb7
kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4
...
Everything except for blkcipher was already built-in, so make blkcipher
built-in as well.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46820
9 years ago
John Crispin
Imre Kaloz
Jo-Philipp Wich
Hauke Mehrtens
Felix Fietkau
Jonas Gorski
Rafał Miłecki
Steven Barth