c6ef9a0720
Profiles: Move wpad-mini to the profiles that use it, rather than default for all profiles (because -wpad-mini means it's not selectable, which isn't what we always want for the No WiFi profile
...
SVN-Revision: 24314
14 years ago
f8ed133c0a
patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.
...
SVN-Revision: 24310
14 years ago
0e839ea40d
Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T."
...
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.
It belongs in generic not brcm63xx.
SVN-Revision: 24308
14 years ago
183d628485
patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise
...
SVN-Revision: 24307
14 years ago
8f9b14dafe
boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.
...
SVN-Revision: 24305
14 years ago
3baa168e09
patches: Refreshed patches after led_count
...
SVN-Revision: 24304
14 years ago
b963cbde33
board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit
...
SVN-Revision: 24303
14 years ago
e5ca4d81f4
Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.
...
SVN-Revision: 24302
14 years ago
ad24e14b35
base-files: Added the preinit information for reset button and preinit indication led, and preinit interface
...
SVN-Revision: 24276
14 years ago
244db5ac6a
board definition: Fixed CPVA642 LED definitions
...
SVN-Revision: 24275
14 years ago
8316194016
board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz
...
SVN-Revision: 24274
14 years ago
7129521696
base-files: Added network defconfig because board only has one ethernet (4-port switch)
...
SVN-Revision: 24273
14 years ago
9677b65cb6
image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me.
...
SVN-Revision: 24191
14 years ago
314bce63e6
bcm63xx: Add support for the T-Com Speedport W 500V.
...
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24190
14 years ago
3a49f669f2
bcm63xx: Add board id override fixup.
...
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.
Also modify the image generation to generate apropriately tagged images.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24189
14 years ago
c51d772e62
bcm63xx: Finalize support for DSL-274xB, rev C2.
...
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24188
14 years ago
8fa9b24a4c
bcm63xx: Allow 'colored' power leds.
...
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24187
14 years ago
fec30c8c80
bcm63xx: Don't hardcode the switch ethernet interface in preinit.
...
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24186
14 years ago
b1b318750a
bcm63xx: Add defconfigs.
...
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 24185
14 years ago
ead8ab8403
update to the latest stable kernels
...
SVN-Revision: 24136
14 years ago
195d1d7446
image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section
...
SVN-Revision: 24127
14 years ago
0c0c1f017f
image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.
...
SVN-Revision: 24118
14 years ago
049e59a27b
Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known).
...
SVN-Revision: 24040
14 years ago
eadb5c84fa
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
...
SVN-Revision: 24011
14 years ago
7583fe8668
Add wps button on alice gate
...
SVN-Revision: 23903
14 years ago
0a5da348d1
update kernels to 2.6.32.25 and 2.6.35.8
...
SVN-Revision: 23851
14 years ago
ffc84cf75c
register uart driver on livebox ( #8013 )
...
SVN-Revision: 23653
14 years ago
7bf5647070
refresh 2.6.35 patches
...
SVN-Revision: 23652
14 years ago
697d3e7066
Fix nxp_74hc164 driver compile error (builbot)
...
SVN-Revision: 23623
14 years ago
20d28f7685
fix platform_devices registration
...
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 23517
14 years ago
af0e5167bc
add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558 )
...
SVN-Revision: 23508
14 years ago
9d9e3fed62
remove 2.6.32 support
...
SVN-Revision: 23505
14 years ago
a1ea84dbb6
fix SPI driver, move register out of driver code
...
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com
SVN-Revision: 23504
14 years ago
1a13c39f76
restore kernel oldconfig
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23503
14 years ago
265bf2ccb0
refresh patches
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23502
14 years ago
9f4c51acb7
refresh nb4 support. Register 74x164 device
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23501
14 years ago
8cbd9d5a2e
add spi devices board info int bcm63xx_boards
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23500
14 years ago
b65e494976
add 74x164 SPI chip support
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23499
14 years ago
cd9b90235c
backport SPI master with no RXTX support (from 2.6.36)
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23498
14 years ago
d5854cfd4d
register earlier extended platform devices
...
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23497
14 years ago
83d6a36019
update 2.6.35.x to 2.6.35.7
...
SVN-Revision: 23213
14 years ago
bbca651e1b
remove wpa-supplicant and iw from the Tecom GW6x00 profile
...
SVN-Revision: 23051
14 years ago
d3e206ad96
default to using 2.6.35
...
SVN-Revision: 23038
14 years ago
dc1302fdf9
remove 2.6.33 support
...
SVN-Revision: 23037
14 years ago
327ac42dca
change the Tecom GW6x00 profile to use wl instead of b43
...
SVN-Revision: 23036
14 years ago
f4f789f211
register udc and spi devices at the correct init level
...
SVN-Revision: 23035
14 years ago
fab2e77357
refresh 2.6.35 patches
...
SVN-Revision: 23034
14 years ago
867ac59ff9
enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx
...
SVN-Revision: 22846
14 years ago
2e343d9760
add 2.6.35 support
...
SVN-Revision: 22800
14 years ago
b1becffa5b
update to 2.6.32.20
...
SVN-Revision: 22766
14 years ago
Daniel Dickinson
Imre Kaloz
Claudio Mignanti
Florian Fainelli
Lars-Peter Clausen
Jo-Philipp Wich