dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
33,689 Commits
2 Branches
0 Tags
653 MiB
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '9f7bbc649c'
${ noResults }
Commit Graph

7 Commits (9f7bbc649c09a31957b6cc7c04f5b6780712b714)

Author SHA1 Message Date
Gabor Juhos 1374e5a721 ar71xx: rb91x: fix ethernet packet loss issues 
The RB91x boards are suffering from ethernet packet loss after a cold
boot. The cause of the problem is that the AR8035 PHYs requires special
register settings to work reliably on these boards.

Enable the RGMII TX, RX delays and disable SmartEE functionality of
the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register
to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40509
 10 years ago
Gabor Juhos da2f3c1448 ar71xx: rb91x: register GPIO LEDs 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39704
 11 years ago
Gabor Juhos 14d95026b2 ar71xx: rb91x: add SPI device for the serial shift register 
The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.

Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39703
 11 years ago
Gabor Juhos 3d906ac6ac ar71xx: rb91x-nand: rewrite to use GPIO API 
Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39700
 11 years ago
Gabor Juhos 8fea668cb7 ar71xx: rb91x: register a gpio-latch platform device 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39699
 11 years ago
Gabor Juhos 4e0309630b ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet loss 
When the RB91x device uses a GbE link the connection
suffers from packet loss:

  root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q
  PING 192.168.1.254 (192.168.1.254): 65507 data bytes

  --- 192.168.1.254 ping statistics ---
  20 packets transmitted, 9 packets received, 55% packet loss
  round-trip min/avg/max = 4.570/4.815/4.999 ms

Using a different PLL value fixes the issue.

  root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q
  PING 192.168.1.254 (192.168.1.254): 65507 data bytes

  --- 192.168.1.254 ping statistics ---
  100 packets transmitted, 100 packets received, 0% packet loss
  round-trip min/avg/max = 4.449/5.413/13.870 ms

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39642
 11 years ago
Gabor Juhos 5237a50089 ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards 
It is only on RB911G-5HPnD and RB912UAG-5HPnD boards.
The LEDs and the USB port is not working yet.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39102
 11 years ago