Commit Graph

8 Commits (7c07a0f4c335bd79b0cac3d91192e76a42bc4e18)

Author SHA1 Message Date
Adrian Schmutzler 1de9cac2f9 ramips: move redundant console setup to mt7621 SoC DTSI
For mt7621, console is set up via DTS bootargs individually in
device DTS/DTSI files. However, 44 of 74 statements use the
following setting:

	chosen {
		bootargs = "console=ttyS0,57600";
	};

Therefore, don't repeat ourselves and move that definition to the SoC
DTSI file to serve as a default value.

This patch is cosmetic.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
DENG Qingfang 30644bc579 ramips: mt7621: update dts/defconfig for DSA
update dts and network/LED configuration for DSA driver.
sysupgrade from images prior to this commit with config preserved
will cause broken ethernet setup.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Acked-by: Jo-Philipp Wich <jo@mein.io>
[split commit]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
4 years ago
DENG Qingfang 66984646c2 ramips: mt7621: update pinctrl nodes
Upstream GPIO driver uses "groups" "function" properties

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years ago
DENG Qingfang 60f691dae4 ramips: mt7621: convert GPIO dts refs
The upstream driver does not use &gpio0..2 banks notation anymore,
so convert them to &gpio

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years ago
Adrian Schmutzler 5cda133d99 ramips: DTS style improvements for mt7621_wevo_w2914ns-v2.dtsi
This does several trivial DTS style improvements:

- Move device name compatible to DTS files (and fix compatible in
  11acnas.dts)
- Remove xhci node as status is set to okay in mt7621.dtsi already
- 0x0 instead of 0x0000
- Simplify state_default node definition

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
Sungbo Eo 62b1559b56 ramips: improve support for WeVO 11AC NAS and W2914NS v2
- remove WAN port index
- load WAN MAC address directly from the flash
- provide label MAC address
- increase flash's SPI frequency to 80MHz
- add mt76 led nodes to make WiFi LEDs work
- drop unnecessary pinmux groups

The factory partition scheme for MAC addresses (verified on both devices):
0x4   : WiFi 2.4GHz (label_mac-9)
0x28  : unused
0x2e  : WAN (label_mac)
0x8004: WiFi 5GHz (label_mac-5)
0xe000: LAN (label_mac-1)
0xe006: unused

By improving flash speed,
`time dd if=/dev/mtdblock3 of=/dev/null bs=64k`
has been reduced from 14.51s to 3.11s.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rebased]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
Adrian Schmutzler 556ff09875 ramips/mt762x: convert devices to interrupt-driven gpio-keys
This converts all remaining devices to use interrupt-driven
gpio-keys compatible instead of gpio-keys-polled.
The poll-interval is removed.

While at it, add/remove newlines in keys and leds node where
necessary.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
Adrian Schmutzler 7196ca1d49 ramips/mt7621: Name DTS files based on scheme
As introduced with ath79, DTS files for ramips will now be labelled
soc_vendor_device.dts(i). With this change, DTS files can be
selected automatically without further manual links.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago