Commit Graph

8 Commits (4a6795409d1520fd3da3e909a8bcf9d7fd0927bb)

Author SHA1 Message Date
Adrian Schmutzler 0f3c3a5fb2 layerscape: harmonize device strings
OpenWrt lately has harmonized device (definition) names to the
pattern vendor_model to improve overall consistency, also with
other values like the DTS compatible.

This patch applies that scheme to the layerscape target.

Since this (intentionally) creates a bigger overlap between DTS names,
compatible, and device definition name, it also moves DEVICE_DTS and
SUPPORTED_DEVICES definitions to the Device/Default blocks.

Apart from that, it also modifies several packages to use consistent
naming in order to keep the $(1) file references working.

While at it, remove one layer of complexity for the setup in
tfa-layerscape package.

Signed-off-by: Adrian Schmutzler <>
3 years ago
Yangbo Lu 12bc4084bd layerscape: update tfa to LSDK-20.04
Update tfa package to latest LSDK-20.04 dropping one patch
which had already been integrated.

Add fixes,
- Remove HIDDEN:=1.
- Move intermediate files installing into Build/InstallDev.

Signed-off-by: Yangbo Lu <>
4 years ago
Yangbo Lu 084c82c5b0 layerscape: define only one package for ls-rcw
We do not have to define package for each board, and
consider variant's building/installing.
It is easier to maintain ls-rcw with only one package
installing all boards RCW binaries as intermediate
files, each of which is just about hundreds of bytes.

Signed-off-by: Yangbo Lu <>
4 years ago
Tomasz Maciej Nowak 3a3d998c12 layerscape: resurrect support for FRDM-LS1012A
Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the
rest boards supported by LSDK.

0x000000000000-0x000000100000 : "bl2"
0x000000100000-0x000000500000 : "fip"
0x000000500000-0x000000600000 : "u-boot-env"
0x000000600000-0x000000a00000 : "reserved-1"
0x000000a00000-0x000000d00000 : "pfe"
0x000000d00000-0x000000f00000 : "reserved-2"
0x000000f00000-0x000001000000 : "dtb"
0x000001000000-0x000002000000 : "kernel"
0x000002000000-0x000004000000 : "ubifs"

SoC: LS1012A single core 800MHz
RAM: 512 MB DDR3
Flash: 64 MB QSPI NOR
Ethernet: 2x 10/100/1000 Mbps
Connectors: µUSB 3.0 OTG
            µUSB 2.0 (debugging & power input)
            2x 3.5mm jack for microphone & headphone (SGTL5000)
            Arduino Shield expansion with I2C, SPI, UART, and GPIO
LEDS: 3x (non-configurable)
Buttons: 1x (reset, non-configurable)

Be advised that erasing or writing 64MB flash takes some time to finish.
Do not reset the board until all operations end with success, otherwise
You'll need external tools to re-program the flash chip.

Follow the QSPI programing procedure for LS1012AFRWY board in
target/linux/layerscape/README, point 3.3.
Don't forget about updating U-Boot environment with MAC addresses of
ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1.

As the LSDK images do not support sysupgrade, nor do changes in this
commit, it's planed in upcoming submissions.

Signed-off-by: Tomasz Maciej Nowak <>
4 years ago
Jeffery To e545fac8d9 build: include BUILD_VARIANT in PKG_BUILD_DIR
This changes the default PKG_BUILD_DIR to take BUILD_VARIANT into
account (if set), so that packages do not need to manually override
PKG_BUILD_DIR just to handle variants.

This also updates most base packages with variants to use the updated
default PKG_BUILD_DIR.

Signed-off-by: Jeffery To <>
4 years ago
Biwen Li 83d5ca2186 tfa-layerscape: fix create_pbl and byte_swap host build
- make create_pbl and byte_swap as host tools

- fix a bug that maybe use the cross compiler
to compile create_pbl and byte_swap:

	# -a option appends the image for Chassis 3 devices in case of non secure boot
	aarch64-openwrt-linux-musl-gcc -Wall -Werror -pedantic -std=c99 -O2
	 -DVERSION=v1.5(release):reboot-10604-ge9216b3336 -D_GNU_SOURCE -D_XOPEN_SOURCE=700
	 -c -o create_pbl.o create_pbl.c
	cc1: note: someone does not honour COPTS correctly, passed 0 times
	  LD      create_pbl
	/usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183)
	/usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183)
	/usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183)
	create_pbl.o: error adding symbols: File in wrong format
	collect2: error: ld returned 1 exit status
	Makefile:43: recipe for target create_pbl failed
	make[4]: *** [create_pbl] Error 1
	plat/nxp/tools/ recipe for target pbl failed
	make[3]: *** [pbl] Error 2

- add tfa- prefix to all tools in order to avoid future clashes with
  other toolnames

Signed-off-by: Biwen Li <>
[added missing HOST_CFLAGS, added tfa- prefix to the tools]
Signed-off-by: Petr Štetiar <>
4 years ago
Petr Štetiar b8249cef9f tfa-layerscape: fix fiptool host build
fiptool is a host tool, used in a firmware generation pipeline, but it's
not treated as such, leading to the build breakage on the hosts which
don't have {Open,Libre}SSL dev package installed:

 In file included from fiptool.h:16:0,
                 from fiptool.c:19:
		 fiptool_platform.h:18:27: fatal error: openssl/sha.h:
		 No such file or directory
		  #  include <openssl/sha.h>

So this patch promotes fiptool into the host tool with proper host
include and library paths under STAGING_DIR.

Signed-off-by: Petr Štetiar <>
4 years ago
Biwen Li 17dcbe1b8e layerscape: add ARM Trusted Firmware package
Add TF-A packages for Layerscape to implement trusted firmware.

Signed-off-by: Biwen Li <>
Signed-off-by: Yangbo Lu <>
5 years ago