2821101c92
platform specific patches don't belong here - take #2
...
SVN-Revision: 25085
14 years ago
7c9d132d10
platform specific patches don't belong here
...
SVN-Revision: 25083
14 years ago
541bebf4ec
brcm47xx: add gpio_set_debounce function
...
SVN-Revision: 24968
14 years ago
d6af00c555
brcm47xx: fix compile problem when serial is deactivated.
...
Thank you Andrey
SVN-Revision: 24885
14 years ago
acb5e80846
kernel: add config option added in kernel 2.6.37-rc7 to generic and run make kernel_oldconfig for brcm47xx.
...
SVN-Revision: 24805
14 years ago
4bee3672dd
brcm47xx: refresh patches with kernel 2.6.37-rc7
...
The deleted patches went upstream in 2.6.37-rc7
SVN-Revision: 24803
14 years ago
93e09b14eb
brcm47xx: wgt634u mac address fix
...
The Netgear wgt634u uses minus between the hex digest of the mac
address and all other broadcom devices are using colons between the hex
digest. Now the mac address is correctly parsed also when minus is used.
SVN-Revision: 24749
14 years ago
9daa5485ba
brcm47xx: add ssb debug option.
...
This fixes a problem with wrt350n.
It boots only if this config option is set, otherwise it reboots after "Switching to clocksource MIPS"
Thank you sn9 for fixing this problem.
SVN-Revision: 24626
14 years ago
1da5dcbb7a
brcm47xx: add some missing pci ID for tg3 driver
...
Broadcom removed these pci id, but at least the wrt350n has a Ethernet
controller with a pci id of 14e4:1676
Thank you sn9 for fixing this problem.
SVN-Revision: 24625
14 years ago
c58d8a369c
brcm47xx: this patch went upstream
...
SVN-Revision: 24624
14 years ago
b8ab3d34eb
kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2
...
SVN-Revision: 24486
14 years ago
2f7964de3e
brcm47xx: do not read from CFE
...
SVN-Revision: 24267
14 years ago
852f7b37ed
brcm47xx: backport patch from kernel 2.6.37
...
Backport patches from r24162
brcm47xx: reorder patches like they were commitet upstream
SVN-Revision: 24266
14 years ago
7b1ae48645
brcm47xx: use on common files dir
...
SVN-Revision: 24264
14 years ago
41b3383499
brcm47xx: Add edimax PS1208mfg support
...
Thank you clemvangelis for the patches. (closes #7672 )
SVN-Revision: 24217
14 years ago
af2349b4bc
brcm47xx: remove support for old kernel versions
...
SVN-Revision: 24168
14 years ago
6f58cc20fc
brcm47xx: use kernel 2.6.36.1 as new default kernel for this target.
...
SVN-Revision: 24167
14 years ago
fb27da9487
brcm47xx: reorder patches like they were commitet upstream
...
SVN-Revision: 24162
14 years ago
8f94a9a224
linux/brcm47xx: sync yhe BCM4710 fix with the upcoming upstream patch.
...
SVN-Revision: 24116
14 years ago
16dd69760f
linux/brcm47xx: add missing patch on r24112
...
SVN-Revision: 24113
14 years ago
40b5fad48d
linux/brcm47xx: Broadcom BCM4710 does not belong in the BMIPS4KC family.
...
SVN-Revision: 24112
14 years ago
26df9231fa
linux/brcm47xx: properly fix r24096
...
SVN-Revision: 24102
14 years ago
aab31771f8
linux/brcm47xx: mainline 2.6.37 602977b0d672687909b0cb0542ede134ed6ef858 commit broke CPU revision: 00024000, MIPS (cc 0x805, rev 0x00, vendor 0x4243) functionality. Revert that patch until we get a proper fix.
...
SVN-Revision: 24096
14 years ago
18dd104885
linux/brcm47xx: include a missing 2.6.37 file (thank you hauke)
...
SVN-Revision: 23955
14 years ago
ce547cf748
brcm47xx: missing in r23949
...
SVN-Revision: 23950
14 years ago
1652eb7863
brcm47xx: CONFIG_HAMRADIO=n makes no sense
...
SVN-Revision: 23949
14 years ago
f950840ec9
linux/brcm47xx: add preliminary 2.6.37 kernel support
...
SVN-Revision: 23945
14 years ago
4e797b6278
brcm47xx: Fix boot problem with wgt634u.
...
Readd the workarround from the old version again which was removed in r22296 and refresh the patches.
This should close #7874
Thank you Russell Senior for testing.
SVN-Revision: 23911
14 years ago
cb0e742bab
Revert "[brcm47xx] Add support for cores with slow WDT clock (bcm5354)"
...
This reverts commit 7467fdab387f451082c15d17ce9ae4d91d74b6ca.
SVN-Revision: 23533
14 years ago
c8c0d4d8e6
Add support for cores with slow WDT clock (bcm5354)
...
Signed-off-by: Aleksandar Radovanovic <biblbroks@sezampro.rs>
SVN-Revision: 23516
14 years ago
9cb3333c0d
linux/brcm47xx: fix an initialization issue on 2.6.36 kernel
...
SVN-Revision: 23392
14 years ago
badd8ffee3
brcm47xx: add patches for kernel 2.6.36
...
SVN-Revision: 23278
14 years ago
5f9a6a5431
upgrade kernel versions to the latest stable ones
...
SVN-Revision: 23219
14 years ago
69120f3f47
update to 2.6.34.5
...
SVN-Revision: 22768
14 years ago
09e05d833d
kernel: update kernel version to 2.6.34.5
...
SVN-Revision: 22759
14 years ago
26f323dcf5
brcm47xx: do not read out cfe
...
Reading the CFE properties causes system hangs on some devices. With
this patch nvram read will be successful very time so cfe will no be
read out. This code is not really correct but it will work around some
problems for some people.
Related ticket: #7693
SVN-Revision: 22663
14 years ago
0780aa2278
brcm47xx/patches-2.6.35: Allow SSB EHCI/OHCI drivers to co-exist (thank you Steve Brown)
...
SVN-Revision: 22661
14 years ago
09244c0811
brcm47xx: do not generate image for wgr614_v8 as long as we did not get any positive reports with that device.
...
SVN-Revision: 22522
14 years ago
7640f89045
brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
...
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/
This closes #7702 .
SVN-Revision: 22516
14 years ago
86b209211e
brcm47xx: ignore some parts of flash on some netgear devices. This space is used to store config values. When overwriting it the device will not start any more.
...
closes #7630
Thank you realopty for testing.
SVN-Revision: 22475
14 years ago
3aca383c72
brcm47xx: some checkpatch fixes
...
SVN-Revision: 22425
14 years ago
96911f6b58
brcm47xx: some fixes
...
* fix return codes of nvram_getenv. Now it behaves like cfe_getenv.
* also check cfe for kernel_args param.
* some style fixes
SVN-Revision: 22424
14 years ago
da7493d8f9
mostly revert commit r22396
...
CFE does not boot images generated with these checksums because of
wrong checksum.
After flashing then with tftp to my Asus wl500-GPv1 the following messages
are show:
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)
SVN-Revision: 22418
14 years ago
7a052dc799
fix CRC32 calculation for sysupgrade
...
* reduce image size for CRC calculation by fs_mark size
sysupgrade sometimes failed for me and I noticed that it was due
to incorrect CRC values in trx-header after performing it.
It seems that the fs_mark was completely included in the calculation
and that it was nevertheless modified by sysupgrade while appending
the jffs data.
This only occurs for the first boot after sysupgrade as the flashmap
driver recalculates the CRC to an even smaller area when it boots.
SVN-Revision: 22396
14 years ago
763e011e70
brcm47xx: now hopfully realy commit the right things from r22385
...
SVN-Revision: 22388
14 years ago
d67c25f592
brcm47xx: add missing part from r22385
...
SVN-Revision: 22387
14 years ago
163b24d092
brcm47xx: fill the whole sprom with data
...
SVN-Revision: 22385
14 years ago
ebeaea35fd
brcm47xx: fix for boardflags by xMff and checkpatch.pl fixes
...
SVN-Revision: 22318
14 years ago
c811398d00
brcm47xx: write boardflags correct into sprom
...
SVN-Revision: 22298
14 years ago
49edb3c342
brcm47xx: prepare brcm47xx patches for sending to mainline.
...
SVN-Revision: 22296
14 years ago
Imre Kaloz
Gabor Juhos
Hauke Mehrtens
Alexandros C. Couloumbis
Florian Fainelli
Markus Wigge