Commit Graph

39927 Commits (34bbbbf9c3b39e7b2d81df590aad5cdbd00280d6)
 

Author SHA1 Message Date
Felix Fietkau c078386ae3 ar71xx: only use SPI NOR 4K sectors on smaller flash chips for mikrotik devices
On NOR based Mikrotik devices, 4K sectors significantly slow down
firmware flashing and jffs2 usage. On NAND based devices they may be
necessary to run rbcfg (the boot loader config is often on SPI NOR).

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Felix Fietkau c08293893a kernel: add support for limiting 4K erase sector support based on flash chip size
Some targets need 4K sectors for small flash chips (e.g. some
routerboards, where the entire chip is just one "erase block"), whereas
on other devices 4K sectors lead to horrible flash erase/write
performance.

Set the default limit in the generic kernel configuration to 4 MiB to
ensure that all new platforms don't use 4K sectors for bigger flash
chips. On all existing targets use 16 MiB for now to avoid regressions.
They will be changed individually in follow-up commits.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Felix Fietkau 94491a1571 ubox: update to the latest version, fixes syslog issues
7a49632 logd: use uloop instead of ustream_fd for syslog
69d6542 logd: only create pipe in stream mode
df30c8c logread: terminate after EOF
bdcacad logd: implement oneshot mode for stream log read
4a10d4e logread: use oneshot mode without -f, wait for logd to close
ea3d7fa logd: enforce line length limit for ubus based log messages as well
960a29d logread: remove leftover debug code
a081904 logread: fix line buffer size
2c0d9cf logd: move stripping of newlines to log_add()

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Philip Prindeville e03dcf494e iperf3: update to 3.3 and refresh patches
Taking the same patchset I've submitted upstream for inclusion.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years ago
John Crispin bd60c9063d bubox: update to latest git HEAD
729f47f jshn: read and write 64-bit integers

Signed-off-by: John Crispin <john@phrozen.org>
6 years ago
Stefan Lippers-Hollmann 9a221c6d69 ip806x: nbg6817: sysupgrade support both targets for kernel/ rootfs partitions
With this commit and the previous "nbg6817: don't hardcode the rootfs location
by using append-rootblock instead" applied, it is possible to boot- and
sysupgrade from both dual-boot sets (the primary mmcblk0p4+mmcblk0p5 or the
alternative mmcblk0p7+mmcblk0p8). However the sysupgrade support does not
toggle between both dual-boot sets between firmware upgrades so far.

The partition map of the eMMC used in the nbg6817 is:

Found valid GPT with protective MBR; using GPT.
Disk /dev/mmcblk0: 7471104 sectors, 3.6 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): XXX
Partition table holds up to 12 entries
First usable sector is 34, last usable sector is 7471070
Partitions will be aligned on 2-sector boundaries
Total free space is 1 sectors (512 bytes)

Number  Start (sector)    End (sector)  Size       Code  Name
   1              34            8225   4.0 MiB     FFFF  rootfs_data
   2            8226           16417   4.0 MiB     FFFF  romd
   3           16418           18465   1024.0 KiB  FFFF  header
   4           18466           26657   4.0 MiB     FFFF  kernel
   5           26658          157729   64.0 MiB    FFFF  rootfs
   6          157730          159777   1024.0 KiB  FFFF  header_1
   7          159778          167969   4.0 MiB     FFFF  kernel_1
   8          167970          299041   64.0 MiB    FFFF  rootfs_1
   9          299042          823329   256.0 MiB   FFFF  bu1
  10          823330         7471069   3.2 GiB     FFFF  bu2

rootfs_data is the ext4 formatted overlay of the OEM firmware, LEDE
ignores it due to its (too) small size.

romd/ bu1 are initialized with zeroes (0x00) and unused.

bu2 is formatted with ext4 and used for streamboost and other optional
functionality by the OEM firmware, it is reformatted during factory
resets of the OEM firmware.

header/ header_1 contains version information for the corresponding
vendor firmwares installed to kernel/rootfs or kernel_1/ rootfs_1, the
format hasn't been completely reverse engineered so far and remains
left untouched by LEDE:

V1.00(ABCS.2)C0:
 00000000  00 00 a7 74 01 32 f0 00  56 31 2e 30 30 28 41 42  |...t.2..V1.00(AB|
 00000010  43 53 2e 32 29 43 30 00  ff ff ff ff ff ff ff ff  |CS.2)C0.........|
 00000020  ff ff ff ff ff ff ff ff  00 00 d5 dc 4e 42 47 36  |............NBG6|
 00000030  38 31 37 00 ff ff ff ff  ff ff ff ff ff ff ff ff  |817.............|
 00000040  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
 *
 00000060  ff ff ff ff ff ff ff ff  ff ff ff ff 00 00 22 a3  |..............".|
 00000070  00 1c 70 00 ff ff ff ff  ff ff ff ff ff ff ff ff  |..p.............|
 00000080  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
 *
 00000800  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 *
 00100000

V1.00(ABCS.5)C0:
 00000000  00 00 bf 94 01 46 d8 00  56 31 2e 30 30 28 41 42  |.....F..V1.00(AB|
 00000010  43 53 2e 35 29 43 30 00  ff ff ff ff ff ff ff ff  |CS.5)C0.........|
 00000020  ff ff ff ff ff ff ff ff  00 00 d6 5a 4e 42 47 36  |...........ZNBG6|
 00000030  38 31 37 00 ff ff ff ff  ff ff ff ff ff ff ff ff  |817.............|
 00000040  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
 *
 00000060  ff ff ff ff ff ff ff ff  ff ff ff ff 00 00 c0 2c  |...............,|
 00000070  00 1c 58 00 ff ff ff ff  ff ff ff ff ff ff ff ff  |..X.............|
 00000080  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
 *
 00010000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
 *
 00100000

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
7 years ago
Stefan Lippers-Hollmann b583aaf5aa ip806x: nbg6817: don't hardcode the rootfs location by using append-rootblock instead
This changes the cmdline from:

Kernel command line: root=/dev/mmcblk0p5 rootfstype=squashfs,ext4 rootwait noinitrd
Bootloader command line (ignored): board=NBG6817 root=/dev/mmcblk0p5 rootwait zld_ver=2.04 console=ttyHSL1,115200n8 mtdparts=m25p80:0xC0000(SBL)ro,0x40000(TZ)ro,0x40000(RPM)ro,0x80000(u-boot)ro,0x10000(env)ro,0x10000(ART)ro,0x10000(dualflag),0x210000(reserved)

to

Kernel command line: rootfstype=squashfs,ext4 rootwait noinitrd root=/dev/mmcblk0p5
Bootloader command line (ignored): board=NBG6817 root=/dev/mmcblk0p5 rootwait zld_ver=2.04 console=ttyHSL1,115200n8 mtdparts=m25p80:0xC0000(SBL)ro,0x40000(TZ)ro,0x40000(RPM)ro,0x80000(u-boot)ro,0x10000(env)ro,0x10000(ART)ro,0x10000(dualflag),0x210000(reserved)

As a consequence booting from the alternative dual-boot partition set
(root=/dev/mmcblk0p8) becomes possible.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
7 years ago
Koen Vandeputte 06d5d01e8a uqmi: replace legacy command invoke with newer type
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years ago
Koen Vandeputte 09582d6b4d uqmi: also try newer pin verification
Newer devices tend to only support the newer version of the pin
verification command, so also try that one.

Fixes PIN issues with modems like the Sierra Wireless MC7455

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years ago
John Crispin 5b3e35d85b ubox: update to latest git HEAD
da5b8b4 log/syslog: Add missing static to two structs.
dd61c9f ubox: Replace { 0 } with {}.

Signed-off-by: John Crispin <john@phrozen.org>
6 years ago
John Crispin f62e2f611c procd: update to latest git HEAD
53e92d4 procd: lower the logging threshold
b39c362 service: Start services normally when seccomp is disabled
3ba6b45 procd: add missing new lines inside debug code
56a02e3 service: fix service_handle_event array
d4a183f service: fix SERVICE_ATTR_NAME usage in service_handle_set

Signed-off-by: John Crispin <john@phrozen.org>
6 years ago
Michal Sojka 0e300a3a71 procd: Always tell cmake whether to include seccomp support or not
Without this change, when a user disables seccomp support in .config,
procd does not get recompiled unless the package is cleaned manually.
It is because when -D option is missing from cmake command line, cmake
uses cached value from the previous run where seccomp was enabled.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
6 years ago
John Crispin 727ab294d0 ubus: update to latest git HEAD
24ffe9b libubus-req: add data_cb callback handling for ubus notifications

Signed-off-by: John Crispin <john@phrozen.org>
6 years ago
Roman Yeryomin 156f2df879 ipq806x: ipq4019: add ap-dk01.1-c1 board support
AP-DK01.1-C1 is QCA dev board with:
- ipq4018 quad core ARM @716.8MHz, 2x2 dual (11n+11ac) radio
- 256MB RAM
- 32MB SPI flash
- QCA8075 multiport ethernet phy (WAN port, 4x LAN ports)

First installation via u-boot:
sf probe
sf erase 0x180000 0x1a00000
tftpboot 0x84000000 lede-ipq806x-AP-DK01.1-C1-squashfs-sysupgrade.bin
sf write 0x84000000 0x180000 $filesize

Further upgrades via sysupgrade.

Changes:
- add partitions
- set memory size to 256MB
- add reserved memory mapping
- add correct compatible string
- add image generation
- extract pre-cal data from ART partition

Compile and run tested.
Wirespeed NAT can be achieved with spreading rx interrupts over different
cores. Wifi speed is ~550Mbps @5GHz in open air.

Note:
AP-DK01.1-C1 is fully compatible with AP-DK01.2-C1, which has
ipq4028 instead of ipq4018 on board.

Changes since v2:
- based on dts(i) rework/cleanup submitted:
  http://lists.infradead.org/pipermail/lede-dev/2017-October/009596.html
- precise reserved memory mapping
- more precise description
- compatible string

Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Roman Yeryomin a22e2bd37d ipq806x: ipq4019: dts: fix maximum cpu speed
Supported frequencies of all ipq40xx chips are 48, 200, 500 and 716.8 MHz.
Previous 666MHz setting was most likely related to instability of early
chips/boards made before mass production.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Roman Yeryomin 21802ce3ab ipq806x: ipq4019: dts: remove spi chip node from ap-dk01 dtsi
All ap-dk01 boards have different spi chips, thus no point in keeping it in dtsi.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Roman Yeryomin 97a836318f ipq806x: ipq4019: dts: move ap-dk01 networking entries to dtsi
That is mdio/ethernet and wifi are present on all ap-dk01 boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Roman Yeryomin 45b1042a0a ipq806x: ipq4019: dts: remove counter entry from ap-dk01 boards
There is no code implementing "qcom,qca-gcnt", so no point in keeping it.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Roman Yeryomin 91f0345801 ipq806x: ipq4019: dts: move ap-dk01 tcsr nodes to dtsi
tcsr configuration is the same for all ap-dk01 boards

Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Roman Yeryomin ba9aa76a3a ipq806x: ipq4019: dts: remove crypto nodes from board dts
crypto and cryptobam are already present in dtsi used by these boards:
- fritz4040
- nbg6617
- rt-ac58u

Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Roman Yeryomin 1abc788924 ipq806x: ipq4019: dts: move xo and timer nodes to SoC dtsi
xo and timer are common thing and it makes more sense to keep them in SoC dtsi

Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Roman Yeryomin ab3ab6241f ipq806x: ipq4019: dts: fix pinctrl node name
Signed-off-by: Roman Yeryomin <roman@advem.lv>
7 years ago
Yousong Zhou f0c37f6ceb libunwind: disable building with ssp
If we enable -fstack-protector while building libunwind, function
__stack_chk_fail_local will be referred to for i386 and powerpc32
arches.  This will cause link failure because the default gcc build
specs says no link_ssp if -nostdlib is given.

The error message:

    OpenWrt-libtool: link: ccache_cc -shared  -fPIC -DPIC  .libs/os-linux.o mi/.libs/init.o mi/.libs/flush_cache.o mi/.libs/mempool.o mi/.libs/strerror.o x86/.libs/is_fpreg.o x86/.libs/regname.o x86/.libs/Los-linux.o mi/.libs/backtrace.o mi/.libs/dyn-cancel.o mi/.libs/dyn-info-list.o mi/.libs/dyn-register.o mi/.libs/Ldyn-extract.o mi/.libs/Lfind_dynamic_proc_info.o mi/.libs/Lget_accessors.o mi/.libs/Lget_proc_info_by_ip.o mi/.libs/Lget_proc_name.o mi/.libs/Lput_dynamic_unwind_info.o mi/.libs/Ldestroy_addr_space.o mi/.libs/Lget_reg.o mi/.libs/Lset_reg.o mi/.libs/Lget_fpreg.o mi/.libs/Lset_fpreg.o mi/.libs/Lset_caching_policy.o x86/.libs/Lcreate_addr_space.o x86/.libs/Lget_save_loc.o x86/.libs/Lglobal.o x86/.libs/Linit.o x86/.libs/Linit_local.o x86/.libs/Linit_remote.o x86/.libs/Lget_proc_info.o x86/.libs/Lregs.o x86/.libs/Lresume.o x86/.libs/Lstep.o x86/.libs/getcontext-linux.o  -Wl,--whole-archive ./.libs/libunwind-dwarf-local.a ./.libs/libunwind-elf32.a -Wl,--no-whole-archive  -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/target-i386_i486_musl-1.1.16/usr/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/target-i386_i486_musl-1.1.16/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/toolchain-i386_i486_gcc-5.4.0_musl-1.1.16/usr/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/toolchain-i386_i486_gcc-5.4.0_musl-1.1.16/lib -lc -lgcc  -Os -march=i486 -fstack-protector -Wl,-z -Wl,now -Wl,-z -Wl,relro -nostartfiles -nostdlib   -Wl,-soname -Wl,libunwind.so.8 -o .libs/libunwind.so.8.0.1
    .libs/os-linux.o: In function `_Ux86_get_elf_image':
    os-linux.c:(.text+0x588): undefined reference to `__stack_chk_fail_local'
    x86/.libs/Lregs.o: In function `_ULx86_access_fpreg':
    Lregs.c:(.text+0x25b): undefined reference to `__stack_chk_fail_local'
    x86/.libs/Lresume.o: In function `_ULx86_resume':
    Lresume.c:(.text+0xdc): undefined reference to `__stack_chk_fail_local'
    collect2: error: ld returned 1 exit status
    Makefile:2249: recipe for target 'libunwind.la' failed

The snippet from gcc -dumpspecs

    %{!nostdlib:%{!nodefaultlibs:%(link_ssp) %(link_gcc_c_sequence)}}

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
6 years ago
Alexander Couzens 2e1f73a79f
mt7620: image.mk: make elecom-header reproducible
elecom-header adds a timestamp dependency. Replace
the timestamps with SOURCE_DATE_EPOCH [0] variable.

[0] https://reproducible-builds.org/specs/source-date-epoch/

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
6 years ago
Felix Fietkau 1c68fd6d75 ar71xx: fix section mismatch in TP-Link Archer C7 v4 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Felix Fietkau e0d58157d8 ar71xx: fix flash fast read on devices using multiple flash chips
Add a callback to allow the SPI driver to indicate which devices fast
flash read works on.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Kevin Darbyshire-Bryant e0bd225269 wireguard: version bump to 0.0.20171101
Update wireguard to latest snapshot:

9fc5daf version: bump snapshot
748ca6b compat: unbreak unloading on kernels 4.6 through 4.9
7be9894 timers: switch to kees' new timer_list functions
6be9a66 wg-quick: save all hooks on save
752e7af version: bump snapshot
2cd9642 wg-quick: fsync the temporary file before renaming
b139499 wg-quick: allow for saving existing interface
582c201 contrib: add reresolve-dns
8e04be1 tools: correct type for CTRL_ATTR_FAMILY_ID
c138276 wg-quick: allow for the hatchet, but not by default
d03f2a0 global: use fewer BUG_ONs
6d681ce timers: guard entire setting in block
4bf32ca curve25519: only enable int128 if compiler support is sound
86e06a3 device: expand scope of destruct lock
e3661ab global: get rid of useless forward declarations
bedc77a device: only take reference if netns is different
7c07e22 wg-quick: remember to rewind DNS settings on failure
2352ec0 wg-quick: allow specifiying multiple hooks
573cb19 qemu: test using four cores
e09ec4d global: style nits
4d3deae qemu: work around ccache bugs
7491cd4 global: infuriating kernel iterator style
78e079c peer: store total number of peers instead of iterating
d4e2752 peer: get rid of peer_for_each magic
6cf12d1 compat: be sure to include header before testing
3ea08d8 qemu: allow for cross compilation
d467551 crypto/avx: make sure we can actually use ymm registers
c786c46 blake2: include headers for macros
328e386 global: accept decent check_patch.pl suggestions
a473592 compat: fix up stat calculation for udp tunnel
9d930f5 stats: more robust accounting
311ca62 selftest: initialize mutex in routingtable selftest
8a9a6d3 netns: use time-based test instead of quantity-based
e480068 netns: use read built-in instead of ncat hack for dmesg

Compile-tested-for: ar71xx
Run-tested-on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
6 years ago
Mathias Kresin 8d3857a347 ath9k: unset the default LED pin if used by platform buttons
Unset the default LED gpio pin if the same gpio pin is used by a button
defined via platform button. It prevents the change of the GPIO value
on wireless up/down or wireless traffic.

Fixes: FS#1129

Signed-off-by: Mathias Kresin <dev@kresin.me>
6 years ago
Florian Beier c4c72a9a42 ar71xx: fix LED config for DIR-869 A1
This fixes the LED configuration for the D-Link DIR-869 A1. In order to
support the device I probed around using an initramfs image for the
UniFi AC. Pulling GPIO 15 to low enabled the LEDs while high disabled them.
GPIO 16 set to low meant that the color was white while pulling it to high
made the color change to orange. The past code was written based upon these
findings.
However, running a flashed image I now discovered that GPIO 15 controls the
orange LEDs while GPIO 16 controls the white ones and that both are active
when low. This means that the GPIOs were inverted and one active_low was set
wrong which this patch fixes.

Behavior of the LED front after this patch is applied:

cat /sys/devices/platform/leds-gpio/leds/d-link:white:status/brightness
0   -> white LEDs are OFF
255 -> white LEDs are ON

cat /sys/devices/platform/leds-gpio/leds/d-link🍊status/brightness
0   -> orange LEDs are OFF
255 -> orange LEDs are ON

If the brightness of both is set to 255 the LED front will be white.
If the brightness of both is set to 0 the LED front will be off.

Signed-off-by: Florian Beier <beier.florian@gmail.com>
6 years ago
Edmunt Pienkowsky fdc7cc9907 base-files: add interval option to netdev LED trigger configuration
Add an uci option to set the interval parameter of the netdev trigger.

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
6 years ago
Mathias Kresin f9311e4070 ar71xx: wzr-hp-ag300h: drop unused wmac led_pin settings
The GPIOs are used for defined LEDs and therefore are ignored/unset in
the ath9k driver since 192f0a3db8. The wireless led led trigger is
added in userspace since e20965811d, which makes the
ap9x_pci_setup_wmac_led_pin() superfluous.

Signed-off-by: Mathias Kresin <dev@kresin.me>
6 years ago
Paul Wassi 67da6a7c5e uboot-kirkwood: update to 2017.09
Upgrade uboot-kirkwood to upstream release 2017.09
Catch up with upstream and move configuration options from
simple defines to Kconfig, as otherwise dependencies would
not be resolved and code would not compile.

Tested-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
6 years ago
Thibaut VARENE dfa2930988 ar71xx: mach-rbspi: fix 74x164 support
The platform data was missing the num_registers element which is now
mandatory in linux 4.9

Without this patch, the gpio probing would fail with:
gpio gpiochip1: (74x164): tried to insert a GPIO chip with zero lines

Fixes: #1106

Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
6 years ago
Stefan Lippers-Hollmann 189433e543 ipq806x: nbg6817: sync MAC addresses to the upstream values
The ZyXEL NBG6817 calculates all MAC addresses based on the ethaddr
value stored in the U-Boot environment (0:APPSBLENV). No MAC addresses
are stored in the ART partition and the generated MAC addresses for the
wlan interfaces alternate randomly between 12:34:56:78:90:12 and
00:03:7f:12:34:56.

interface	  new/ OEM MAC	old MAC

wlan-2.4g (phy1): ethaddr	undefined
wlan-5g   (phy0): ethaddr + 1	undefined
lan             : ethaddr + 2	ethaddr
wan             : ethaddr + 3	ethaddr + 1

This patch defines stable MAC addresses for the wlan interfaces for
the first time instead of generating them at random. The previously
defined values for lan/ wan are changed to follow the settings of the
OEM firmware.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
6 years ago
Stefan Lippers-Hollmann 6e6d4f2e87 ipq806x: nbg6817: add kmod-fs-ext4 to device packages
The ZyXEL NBG6817 uses an eMMC flash for the rootfs, which is split
into the readonly squashfs and ext4 for the overlay. This adds the
required package to the device packages to allow mounting the overlay
by default.

/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/loop0 on /overlay type ext4 (rw,noatime,data=ordered)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
mountd(pid1040) on /tmp/run/blockd type autofs (rw,relatime,fd=7,pgrp=1,timeout=30,minproto=5,maxproto=5,indirect)

Before this commit, the ext4 based overlayfs could not be mounted,
which left only the tmpfs based/ volatile  emergency overlay in place.

Fixes: https://forum.lede-project.org/t/zyxel-nbg6817-flashing-from-oem/768

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
6 years ago
Mathias Kresin 56189f1e32 ltq-atm: add missing dependency to kmod-ltq-adsl-*-mei
Commit 2e496876c6 fixed the generation of the depends line for external
kernel modules which makes it possible for the build system to
automatically detect this missing dependency.

This fixes the packaging of kmod-ltq-atm for the ar9, xway and
xway-legacy subtarget.

Fixes: FS#1124

Signed-off-by: Mathias Kresin <dev@kresin.me>
6 years ago
Felix Fietkau c6f71ad30b build: fix another regression in append-dtb fix
Filter out duplicate generated code for the same dts files

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Felix Fietkau fae5f02912 build: fix regression in append-dtb fix
Strip whitespace from DTS directory
Put the dependency earlier in the chain to avoid make errors

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Felix Fietkau eb58eba08b uclient: update to the latest version, fixes fetch of multiple files
4b87d83 uclient-fetch: fix overloading of output_file variable

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Tero Jänkä 82a4b8dd6a netifd: fix dns and domain variables pollution in dhcp.script
Unmodified dns and domain variables could be needed in user script (/etc/udhcpc.user).

Signed-off-by: Tero Jänkä <tero.janka@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cleanup)
6 years ago
Felix Fietkau 986d9deb3b build: allow calling append-dtb from image build commands
mpc85xx uses this for firmware image files, since the dtb data is not
directly part of the kernel image. This causes build failures in the
image builder.

Fix this by adding a separate build step that runs this call earlier,
reusing the generated file for any calls from kernel or image build
commands.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Felix Fietkau 7e2c271a80 gcc: remove support for libgcj/java
It has been removed in gcc 7

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Alif M. Ahmad 23dd6db2ea include/toplevel.mk: Add xconfig target
Add xconfig target to include/toplevel.mk, so that ``make xconfig`` can
be invoked from $TOPDIR to use Qt based configuration tool to prepare
.config file.

The qconf related sources are taken from linux 4.9.13 archive.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
6 years ago
Alif M. Ahmad b1501a684b scripts/config: add qconf files to .gitignore
This commit adds qconf related files to .gitignore.
The files to be tracked are qconf.cc, qconf.h, and images.c.
The files to be ignored are qconf*.o, qconf*, qconf.moc, and
.tmp_qtcheck.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
6 years ago
Alif M. Ahmad ff43c03c14 scripts/config: Add qconf target to Makefile
qconf is kconfig UI utilizing QT toolkit. This makes it possible to use
graphical interface interaction to configure LEDE build target.

This commit adds qconf target to ./script/config/Makefile to be used by
toplevel ``make xconfig`` later.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
6 years ago
Felix Fietkau 349bb6e663 scripts/config: add -DKBUILD_NO_NLS to CXXFLAGS
Preparation for adding C++ code which needs the same flag

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Alif M. Ahmad 96eb96c3f0 scripts/config: import qconf
Import qconf.cc, qconf.h, and images.c from linux kernel 4.9.13 archive.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
6 years ago
Felix Fietkau 22d982ea00 ramips: add support for switching between 3-byte and 4-byte addressing on w25q256 flash
On some devices the flash chip needs to be in 3-byte addressing mode during
reboot, otherwise the boot loader will fail to start.
This mode however does not allow regular reads/writes onto the upper 16M
half. W25Q256 has separate read commands for reading from >16M, however
it does not have any separate write commands.
This patch changes the code to leave the chip in 3-byte mode most of the
time and only switch during erase/write cycles that go to >16M
addresses.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
6 years ago
Hans Dedecker f90f94d2c1 nghttp2: switch to release tarball
Switch from git to xz release tarball as there's no good reason to keep
using git when release tarballs are provided.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
6 years ago
Baptiste Jonglez 098afa1e1b openssl: Enable assembler optimizations for aarch64
OpenSSL is built with the generic linux settings for most targets,
including aarch64.  These generic settings are designed for 32-bit CPU and
provide no assembler optmization: this is widely suboptimal for aarch64.

This patch simply switches to the aarch64 settings that are already
available in OpenSSL.

Here is the output of "openssl speed" before the optimization, with
"(...)" representing build flags that didn't change:

    OpenSSL 1.0.2l  25 May 2017
    options:bn(64,32) rc4(ptr,char) des(idx,cisc,2,int) aes(partial) blowfish(ptr)
    compiler: aarch64-openwrt-linux-musl-gcc  (...)

And after this patch, OpenSSL uses 64 bit mode and assembler optimizations:

    OpenSSL 1.0.2l  25 May 2017
    options:bn(64,64) rc4(ptr,char) des(idx,cisc,2,int) aes(partial) blowfish(ptr)
    compiler: aarch64-openwrt-linux-musl-gcc  (...)  -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM

Here are some benchmarks on a pine64+ running latest LEDE master r5142-20d363aed3:

    before# openssl speed sha aes blowfish
    The 'numbers' are in 1000s of bytes per second processed.
    type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
    sha1              3918.89k     9982.43k    19148.03k    24933.03k    27325.78k
    sha256            4604.51k    10240.64k    17472.51k    21355.18k    22801.07k
    sha512            3662.19k    14539.41k    21443.16k    29544.11k    33177.60k
    blowfish cbc     16266.63k    16940.86k    17176.92k    17237.33k    17252.35k
    aes-128 cbc      19712.95k    21447.40k    22091.09k    22258.35k    22304.09k
    aes-192 cbc      17680.12k    19064.47k    19572.14k    19703.13k    19737.26k
    aes-256 cbc      15986.67k    17132.48k    17537.28k    17657.17k    17689.26k

    after# openssl speed sha aes blowfish
    type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
    sha1              6770.87k    26172.80k    86878.38k   205649.58k   345978.20k
    sha256           20913.93k    74663.85k   184658.18k   290891.09k   351032.66k
    sha512            7633.10k    30110.14k    50083.24k    71883.43k    82485.25k
    blowfish cbc     16224.93k    16933.55k    17173.76k    17234.94k    17252.35k
    aes-128 cbc      19425.74k    21193.31k    22065.74k    22304.77k    22380.54k
    aes-192 cbc      17452.29k    18883.84k    19536.90k    19741.70k    19800.06k
    aes-256 cbc      15815.89k    17003.01k    17530.03k    17695.40k    17746.60k

For some reason AES and blowfish do not benefit, but SHA performance
improves between 1.7x and 15x.  SHA256 clearly benefits the most from the
optimization (4.5x on small blocks, 15x on large blocks!).

When using EVP (with "openssl speed -evp <algo>"):

    # Before, EVP mode
    type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
    sha1              3824.46k    10049.66k    19170.56k    24947.03k    27325.78k
    sha256            3368.33k     8511.15k    16061.44k    20772.52k    22721.88k
    sha512            2845.23k    11381.57k    19467.69k    28512.26k    33008.30k
    bf-cbc           15146.74k    16623.83k    17092.01k    17211.39k    17249.62k
    aes-128-cbc      17873.03k    20870.61k    21933.65k    22216.36k    22301.35k
    aes-192-cbc      16184.18k    18607.15k    19447.13k    19670.02k    19737.26k
    aes-256-cbc      14774.06k    16757.25k    17457.58k    17639.42k    17686.53k

    # After, EVP mode
    type             16 bytes     64 bytes    256 bytes   1024 bytes   8192 bytes
    sha1              7056.97k    27142.10k    89515.86k   209155.41k   347419.99k
    sha256            7745.70k    29750.06k    95341.48k   211001.69k   332376.75k
    sha512            4550.47k    18086.06k    39997.10k    65880.75k    81431.21k
    bf-cbc           15129.20k    16619.03k    17090.56k    17212.76k    17246.89k
    aes-128-cbc      99619.74k   269032.34k   450214.23k   567353.00k   613933.06k
    aes-192-cbc      93180.74k   231017.79k   361766.66k   433671.51k   461731.16k
    aes-256-cbc      89343.23k   209858.58k   310160.04k   362234.88k   380878.85k

Blowfish does not seem to have assembler optimization at all, and SHA
still benefits (between 1.6x and 14.5x) but is generally slower than in
non-EVP mode.

However, AES performance is improved between 5.5x and 27.5x, which is
really impressive!  For aes-128-cbc on large blocks, a core i7-6600U
@2.60GHz is only twice as fast...

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
7 years ago