Commit Graph

36077 Commits (25dab5d217715300dc609df07b56e5b73cefdfc1)
 

Author SHA1 Message Date
Petko Bordjukov c5913264e7 mwlwifi: Expose the IEEE 802.11w support to hostapd
Add a dependency on DRIVER_11W_SUPPORT in order to enable the IEEE
802.11w functionality in hostapd.

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
8 years ago
Johannes Römer e8cb7d30e9 hostapd: fix typo and indentation in ap_sta_support.patch
Signed-off-by: Johannes Römer <jroemer@posteo.net>
8 years ago
Alexis Green aeea251fad ath10k-ct: fix missing symbols if ath9k is not selected
Require kernel to compile with CONFIG_RELAY=y

Signed-off-by: Alexis Green <alexis@cessp.it>
8 years ago
Felix Fietkau 49a6f67c39 mac80211: backport new register bitfield macros
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 9cf0444768 mac80211: add a tx sequence number allocation fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Christian Lamparter 78e63ce7e3 apm821xx: add size check for initramfs kernel for the Meraki MR24
Russell Senior reported an issue with the MR24 initramfs kernels:
> ## Booting kernel from Legacy Image at 00c10000 ...
>   Image Name:   POWERPC LEDE Linux-4.4.19
>   Created:      2016-08-31  11:57:05 UTC
>   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>   Data Size:    2155723 Bytes = 2.1 MiB
>   Load Address: 00000000
>   Entry Point:  00000000
>   Verifying Checksum ... OK
>Wrong Ramdisk Image Format
>Ramdisk image is corrupt or invalid

For the MR24, the kernel is uploaded to 0x10000. The ramdisk starts
at 0x200000. This leaves the kernel with just 0x1f0000 bytes = 1984kb.
This patch adds a size check so the image creation script will abort
instead of producing a unbootable initramfs image. A separate patch
"apm821xx: Fix initramfs image for the Meraki MR24" which fixed the
reported issue was submitted earlier.

Cc: Russell Senior <russell@personaltelco.net>
Cc: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
8 years ago
riptidewave93 bc36678bdb apm821xx: Fix initramfs image for the Meraki MR24
When gzip is used, our kernel is too large and this causes the ramdisk
to be at the wrong offset. Fix by moving to lzma.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
8 years ago
Karl Palsson a4dc9ff934 dropbear: mdns flag is a bool, not integer
Effectively the same for most purposes, but more accurate.

Signed-off-by: Karl Palsson <karlp@etactica.com>
8 years ago
Karl Palsson ad8d197b82 base-files: support oneshot leds properly.
oneshot trigger configurations for LEDs are created, but the on/off
timing configurations are ignored.  generate_config is correctly creating
oneshot configs, but the later led script doesn't recognise the trigger
details.

Fixes: c0c3f2d4c9 leds: support oneshot as well as timer triggers
Signed-off-by: Karl Palsson <karlp@etactica.com>
8 years ago
John Crispin b5f7221afa fstools: fix logic bug in extroot verification code
Signed-off-by: John Crispin <john@phrozen.org>
8 years ago
John Crispin 81b779d4d9 ugps: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
8 years ago
Conn O'Griofa f362dc154d zram-swap: CONFIG_PROCD_ZRAM_TMPFS compatibility
Enable CONFIG_PROCD_ZRAM_TMPFS compatibility via two changes to list_cpu_idx():
* detect if /tmp is being used by /dev/zram0; if yes, offset initial value by 1 to skip first zram device.
* hot-add /dev/zram1, if not already present.

Signed-off-by: Conn O'Griofa >connogriofa@gmail.com>
8 years ago
Koen Vandeputte 911b6ca234 imx6: enable ARM crypto acceleration 8 years ago
Koen Vandeputte 0cf48c4407 imx6: refresh kernel config
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
8 years ago
Tim Harvey 232893037a generic: add NET3380 UDC support
Add a patch to backport 5185c91385d73cdf79836eb8548e4726e43ae831
from Linux 4.8 adding USB2380 support to the NET2280 driver and
create an OpenWrt menu option to select it as a module.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
8 years ago
Tim Harvey 3314bcf715 imx6: add GW553x support
The Gateworks Ventana GW553x is a single-board computer based on the NXP
IMX6 SoC with the following features:
 * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q)
 * small form factor (35x70mm)
 * 512MB DDR3 DRAM (2x32bit) (options up to 2GB)
 * 256MB NAND flash (4GB option)
 * Gateworks System Controller:
  - hardware watchdog
  - hardware monitor
  - pushbutton controller
  - EEPROM storage
  - power control
 * JTAG programmable
 * 1x miniPCI socket (with PCIe, USB, SIM)
 * 1x microSD socket
 * 1x SIM socket
 * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag)
 * analog CVBS video in
 * GPS (optional uBlox EVA-M8M)
 * Application headers:
  - 2x TTL UART (TX/RX)
  - 4x TTL GPIO (3x configurable as PWM)
  - 3x CVBS Analog video input (1x decoder with 3x selectable inputs)
 * Front panel connectors:
  * micro-HDMI audio/video out
  - 1x user programmable LED
  - 1x configurable user pushbutton
  - 1x USB OTG

See http://www.gateworks.com for more info

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
8 years ago
Tim Harvey a4b86b292a boot: kobs-ng: update kobs-ng for newer kernels
This allows kobs-ng to flash the SPL successfully on the 4.4 kernel used by
the Gateworks IMX boards supporting NAND. The previous version of kobs-ng
worked with the 3.14 kernel but will brick a board making its SPL unbootable
for the 4.4 kernel.

See http://trac.gateworks.com/wiki/ventana/bootloader#nandspl for instructions
on updating the SPL from Linux.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
8 years ago
Syrone Wong f8c7e935ef toolchain/gcc: bump GCC 6.1.0 to 6.2.0
Compile and run tested on ar71xx and mvebu

Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
8 years ago
Felix Fietkau aa53f78038 build: fix subtarget descriptions
Move Target/Description above the target.mk include

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Daniel Golle a810e7789a oxnas: add mem=128M to stg-212 built-in cmdline for legacy u-boot
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years ago
Daniel Golle 9c69ba83e2 oxnas: add method to extract mac_adr from legacy cmdline
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years ago
Daniel Golle c773a2c46e oxnas: kd20: generate image compatible with stock firmware
* adjust MTD partitions to match vendor's scheme
 * generate *factory.tar.gz image compatible with stock web-if
   firmware upgrade interface

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years ago
Daniel Golle fe89f90119 oxnas: allow booting with legacy loaders
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years ago
Felix Fietkau 02a9a74d17 ar71xx: fix ethernet driver fast reset issue causing tx timeouts
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 358cd6d9eb ramips: fix legacy initramfs images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau dbc9ee5b72 ath9k: fix regression in tx queueing patch
power save response frames can go through the old tx path, and the tid
needs to be set for sequence numbers to be assigned correctly.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 2d7d9baf19 mvebu: use ptgen instead of fdisk to make the clearfog image script more portable
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 7130833a27 mvebu: fix boot script for booting from mmc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Josua Mayer 3242c07649 mvebu: add sdcard image creation script
Added gen_mvebu_sdcard_img.sh to facilitate creating an fixed-size sdcard image,
adding the bootloader and populating it with actual data.

Added the required rules for creating a 4GB sdcard image according to this layout:
p0: boot (fat32)
p1: rootfs (squashfs)
p2: rootfs_data (ext4)
This should be generic to any mvebu boards that can boot from block storage.

Added the new sdcard image to the Clearfog image profile.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
8 years ago
Josua Mayer a67183a7bc mvebu: clearfog: require uboot-mvebu-clearfog
The u-boot variant for the clearfog is provided by the uboot-mvebu-clearfog,
and not by the generic uboot-mvebu packae.
Make sure the clearfog variant is selected when building for it.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Zhao Gang 28a2901cba ath10k-firmware: add QCA9887 firmware
QCA9887 is experimentally supported in compat-wireless-2016-06-20.

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
8 years ago
Nathaniel Wesley Filardo 39d817cf38 Add config symbols for kernel keyring support
Enable selection of the kernel key retention framework and some of its
additional facilities; see Documentation/security/keys.txt and
security/keys/Kconfig for details

Signed-off-by: Nathaniel Wesley Filardo <nwfilardo@gmail.com>
8 years ago
Gabe Rodriguez 2d418381bb mwlwifi: Updated to latest source
This commit updates the mwlwifi driver to the latest version provided in the repo.

Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
8 years ago
Felix Fietkau a894a535ff mac80211: add fixes for dealing with unexpected BlockAck frames
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 372d0fea29 ath9k: add a bunch of powersave handling fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 1e72d1bf16 mac80211: add a powersave handling fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Ted Hess 4f40f22fb3 Add Issue submission template (redirect to bugs.lede-project.org)
Signed-off-by: Ted Hess <thess@kitschensync.net>
8 years ago
Felix Fietkau 00a1056c3f openssl: re-enable ARM assembly
The original reason for disabling it seems to have been fixed
Related discussion: https://github.com/lede-project/source/pull/307

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau d3730c9aca imx6: disable EOF markers on UBI
The boot loader does not recognize them and might mess up the volume

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau a84a74f618 scripts/ubinize-image.sh: add support for adding custom partitions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau f29774bee3 glibc: re-enable parallel builds
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 4badb8a023 glibc: switch to 2.24 by default and remove old versions, fixes security issues
2.24 fixes the following CVEs compared to 2.23:
- CVE-2016-3075
- CVE-2016-3706
- CVE-2016-1234
- CVE-2016-4429
- CVE-2016-5417

CVEs fixed in 2.23:
- CVE-2015-8776
- CVE-2015-8777
- CVE-2015-8778
- CVE-2015-8779
- CVE-2014-9761
- CVE-2015-7547

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 8e0cb8f582 ebtables: fix build with glibc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 18c7d1c626 dante: remove -D_GNU_SOURCE to fix build errors with current glibc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Dirk Neukirchen bf604f3503 glibc: add 2.24
since eglibc is deprecated just use glibc as name

- fix build errors w. stack-protector (observed for x86_64):
libresolv_pic.a(gethnamaddr.os): In function `addrsort':
gethnamaddr.c:(.text+0x425): undefined reference to `__stack_chk_guard'

by additionally setting libc_cv_ssp_strong=no
like previously libc_cv_ssp=no was set

- fix compile errors on 2.24 x86 introduced by
upstream changesets "Optimize i386 syscall inlining"

errors are like:
- https://sourceware.org/ml/libc-alpha/2015-10/msg00745.html
and trying to fix with the whats suggested at:
https://patchwork.openembedded.org/patch/118909/
leads to other error:
gcc6: elf/librtld.os: In function `__mmap':
(.text+0x131a9): undefined reference to `__libc_do_syscall'
or:
gcc5: elf/dl-load.os
{standard input}: Assembler messages:
{standard input}:5129: Error: symbol `__x86.get_pc_thunk.cx' is already defined

instead of testing other flags/effects (-fno-omit-frame-pointer)
just use -O2 (like buildroot does) instead of -Os

boot+pings tested on:
qemu malta (le+be) (gcc5+bin2.25.1)
qemu aarch64 (gcc5+bin2.25.1)
qemu x86_64 (gcc6+bin2.26)
qemu x86 generic (gcc6+bin2.26)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
8 years ago
Felix Fietkau 98206cb9c6 iperf: add -lm to fix build with newer glibc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau b0dcb6bfed iperf: drop PKG_BUILD_DIR override
No longer necessary since the removal of build variants

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 056ce2474d x86: enable fpu for all subtargets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Josua Mayer fa0c45c397 mvebu: add fpu to features
This triggers HAS_FPU=y, and unsets CONFIG_SOFT_FLOAT.
Considering all mvebu boards have an fpu, this is the desirable behaviour.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago
Felix Fietkau 86e27f135b mvebu: enable ARM crypto acceleration
Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years ago