d02a05b mt7603: update firmware to version 20160107100755
4d4cd05 Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values"
170f334 mt76x2: remove MAC address limitation for multi-vif setups
3563b8f mt76x2: clean up MAC/BSSID address initialization
9de77e1 mt76x2: drop wiphy->addresses
a6a6e25 mt76x2: init: disable APCLI by default
c64633e mt76x2: configure rx filter based on monitor mode setting
ac815fa mt76x2: init: fix rx filter default value during init
e504656 mt7603: configure other-unicast drop based on monitor mode setting
Signed-off-by: Felix Fietkau <nbd@nbd.name>
add no-ssl3-method again as 1.0.2n compiles without the ssl3-method(s)
Fixes CVEs: CVE-2017-3737, CVE-2017-3738
Signed-off-by: Peter Wagner <tripolar@gmx.at>
Different invocations of the dnsmasq init script (e.g. at startup by procd)
will rewrite the dhcp host file which might result into dnsmasq reading an
empty dhcp host file as it is being rewritten by the dnsmasq init script.
Let the dnsmasq init script first write to a temp dhcp host file so it does
not overwrite the contents of the existing dhcp host file.
Reported-by: Hartmut Birr <e9hack@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
wpa_disable_eapol_key_retries can't prevent attacks against the Wireless
Network Management (WNM) Sleep Mode handshake. Currently, hostapd
processes WNM Sleep Mode requests from clients regardless of the setting
wnm_sleep_mode. Backport Jouni Malinen's upstream patch 114f2830 in
order to ignore such requests by clients when wnm_sleep_mode is disabled
(which is the default).
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
[rewrite commit subject (<= 50 characters), bump PKG_RELEASE]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
wpa_disable_eapol_key_retries can't prevent attacks against the
Tunneled Direct-Link Setup (TDLS) handshake. Jouni Malinen suggested
that the existing hostapd option tdls_prohibit can be used to further
complicate this possibility at the AP side. tdls_prohibit=1 makes
hostapd advertise that use of TDLS is not allowed in the BSS.
Note: If an attacker manages to lure both TDLS peers into a fake
AP, hiding the tdls_prohibit advertisement from them, it might be
possible to bypass this protection.
Make this option configurable via UCI, but disabled by default.
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Tiny variant supports a subset of the ip commands; align the ip help
text so it actually reflects which commands are supported in the
tiny variant.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Preserves optionality of libmnl by letting configuration
script follow the HAVE_MNL environment variable.
Signed-off-by: Russell Senior <russell@personaltelco.net>
If all configured dns servers return refused in response to a query in
strict mode; dnsmasq will end up in an infinite loop retransmitting the
dns query resulting into high CPU load.
Problem is fixed by checking for the end of a dns server list iteration
in strict mode.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
11f42a8 mt76x2: add channel argument to eeprom tx power functions
3bd7e76 mt76x2: initialize channel power limits
19fff41 mt76x2: convert between per-chain tx power and combined output
737cf2b mt7603: rename mt7603_mac_reset to mt7603_pse_reset
8026638 mt7603: rename MT_PSE_RESET register
c4dd32a mt7603: remove watchdog reset on interface stop
d99092b mt7603: remove WARN_ON_ONCE for workaround checks
c8807b4 mt7603: simplify PSE reset
d8a5990 mt7603: warn if PSE reset fails
c079960 mt7603: clean up dma debug reads
96817d6 mt7603: make mt7603_mac_watchdog_reset() static
e953c78 mt7603: clear wtbl PS bit for powersave responses
57a2e33 mt7603: set tx-skip flag for powersave clients
c8e5ab1 mt7603: initialize wtbl ps flag on station add
b4034cf mt76x2: remove some harmless WARN_ONs in tx status and rx path
8e17d36 mt7603: remove some harmless WARN_ONs in rx path
Signed-off-by: Felix Fietkau <nbd@nbd.name>
layerscape firmware package names collide with existing package contributions.
Ex: layerscape mc and midnight-commander(mc) are in conflict.
Firmware packages: mc, ppa, rcw and dpl are renamed to ls-mc, ls-ppa, ls-rcw
and ls-dpl respectively.
Signed-off-by: Ted Hess <thess@kitschensync.net>
CVE-2017-8816: NTLM buffer overflow via integer overflow
CVE-2017-8817: FTP wildcard out of bounds read
CVE-2017-8818: SSL out of buffer access
For other bugfixes and changes in 7.57.0 see https://curl.haxx.se/changes.html
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Latencies can be much higher on wifi devices, especially with
aggregation. Tune the network stack setting introduced in the previous
commit to account for that.
This commit reintroduces the previously reverted one with a fix for the
crash issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Due to improper localization of helper variables, "config host" entries
without a given mac address may inherit the mac address of a preceeding,
leading to invalid generated netive configuration.
Fix the issue by marking the "macs" and "tags" helper variables in
dhcp_host_add() local, avoiding the need for explicitely resetting them
with each invocation.
Reported-by: Russell Senior <russell@personaltelco.net>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This reverts commit 2dc485250d.
This patch needs some additional checks in order to avoid overwriting
unrelated fields for request sockets.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
== Changes ==
* compat: support timespec64 on old kernels
* compat: support AVX512BW+VL by lying
* compat: fix typo and ranges
* compat: support 4.15's netlink and barrier changes
* poly1305-avx512: requires AVX512F+VL+BW
Numerous compat fixes which should keep us supporting 3.10-4.15-rc1.
* blake2s: AVX512F+VL implementation
* blake2s: tweak avx512 code
* blake2s: hmac space optimization
Another terrific submission from Samuel Neves: we now have an implementation
of Blake2s using AVX512, which is extremely fast.
* allowedips: optimize
* allowedips: simplify
* chacha20: directly assign constant and initial state
Small performance tweaks.
* tools: fix removing preshared keys
* qemu: use netfilter.org https site
* qemu: take shared lock for untarring
Small bug fixes.
Remove myself from the maintainers list: we have enough and I'm happy to
carry on doing package bumps on ad-hoc basis without the 'official'
title.
Run-tested: ar71xx Archer C7 v2
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
939ad5dd Update manual pages
24d92b97 Add deprecation warning when spdylay support is enabled
4c92ff18 Bump up version number to 1.28.0, LT revision to 29:0:15
280db5c6 Update neverbleed
7fbcb2d0 Merge pull request #1074 from nghttp2/fix-doc
53aeb2c3 Fix doc
ff200bfc clang-format-5.0
fee3151f Switch to clang-format-5.0
99a85159 Update manual pages
2a981a3f Merge pull request #1066 from nghttp2/nghttpx-add-affinity-cookie-secure
0028275d nghttpx: Add affinity-cookie-secure parameter to backend option
ee8bfddf Merge pull request #1063 from nghttp2/error_callback2
194acb1f src: Use nghttp2_error_callback2
43a2a70a Add nghttp2_error_callback2
73344ae9 nghttpx: Use plain hex string format for client serial
c479f612 Merge pull request #1060 from nghttp2/nghttpx-add-client-serial
eca0a302 nghttpx: Add $tls_client_serial log variable
4720c5cb nghttpx: Make client serial available in mruby script
cd55ab28 nghttpx: Add function to get serial number from certificate
d402cfdf Merge pull request #1057 from nghttp2/nghttpx-add-tls-client-issuer-name
22502182 Add tls_client_issuer_name log variable and expose it to mruby
05e1fd5e Update manual pages
943d7923 Add Session Affinity section to nghttpx howto
568ecbfb doc: Add missing port
f5ddd7f4 nghttpx: Make initial_addr_idx_ unsigned
88abbce7 nghttpx: Fix compile error with gcc
16e90365 nghttpx: Fix affinity retry
fa7945c6 nghttpx: Refactor
daca43f0 nghttpx: Fix stalled backend connection on retry
16bc11e6 nghttpx: Remove duplicated util::make_socket_nodelay
6f7e94cd Merge pull request #1047 from PiotrSikora/go_vet
61efa15a integration: Fix issues reported by the `go vet` tool.
8c0ea56b Merge pull request #1036 from nghttp2/nghttpx-affinity-cookie
54905371 nghttpx: Refactor
6010d393 integration: Add tests
be5c39a1 src: Add tests
b8fda680 nghttpx: Cookie based session affinity
e29b9c12 Merge pull request #1045 from nghttp2/nghttpx-sha1-fingerprint
539e2781 nghttpx: Add tls_client_fingerprint_sha1 to mruby and accesslog
7008afd4 nghttpx: Refactor get_x509_fingerprint to accept hash function
77a41756 Merge pull request #1041 from nghttp2/fix-examples-client-server
b15045d6 Merge pull request #1040 from nghttp2/nghttpx-mruby-add-more-tls-vars
03084f75 examples: Make client and server work with libevent-2.1.8
60baca27 nghttpx: Add more TLS related attributes to mruby Env object
86990db2 Merge pull request #1038 from nghttp2/nghttpx-add-more-logging-vars
cb376bcd nghttpx: Add client fingerprint and subject name to accesslog
f2b8edd1 nghttpx: Fix memory leak
c4f8afcf nghttpx: Get TLS info only when it is necessary when writing accesslog
1a1a216d Merge pull request #1037 from nghttp2/nghttpx-mruby-tls-client-vars
9f80a82c nghttpx: Add client fingerprint and subject name to mruby env
c573c80b nghttpx: Pass a pointer to SSL instead of TLSSessionInfo to LogSpec
3cd6817e Fix typos
d4a69658 Add another warning about mruby
8e06fe49 Fix typo
aaeeec8f Fix typos
66d5e246 Bump up version number to 1.28.0-DEV
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
dfb2f6c pkt_sched: make compile again
5ab7026 sch_cake: make compile again
6f28803 codel5: make more checkpatch compliant
bd426aa Fix build error on 4.12
e4a3628 Whitespace tidy up
Signed-off-by: Fushan Wen <qydwhotmail@gmail.com>
Add an ipv6only variant providing server services for RA, stateful and stateless
DHCPv6, prefix delegation and relay support for DHCPv6, NDP and RA.
The full variant called odhcpd supports DHCPv4 server as before.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Bump to latest WireGuard snapshot release:
ed479fa (tag: 0.0.20171122) version: bump snapshot
efd9db0 chacha20poly1305: poly cleans up its own state
5700b61 poly1305-x86_64: unclobber %rbp
314c172 global: switch from timeval to timespec
9e4aa7a poly1305: import MIPS64 primitive from OpenSSL
7a5ce4e chacha20poly1305: import ARM primitives from OpenSSL
abad6ee chacha20poly1305: import x86_64 primitives from OpenSSL
6507a03 chacha20poly1305: add more test vectors, some of which are weird
6f136a3 compat: new kernels have netlink fixes
e4b3875 compat: stable finally backported fix
cc07250 qemu: use unprefixed strip when not cross-compiling
64f1a6d tools: tighten up strtoul parsing
c3a04fe device: uninitialize socket first in destruction
82e6e3b socket: only free socket after successful creation of new
df318d1 compat: fix compilation with PaX
d911cd9 curve25519-neon: compile in thumb mode
d355e57 compat: 3.16.50 got proper rt6_get_cookie
666ee61 qemu: update kernel
2420e18 allowedips: do not write out of bounds
185c324 selftest: allowedips: randomized test mutex update
3f6ed7e wg-quick: document localhost exception and v6 rule
Compile-tested-for: ar71xx
Run-tested-on: ar71xx Archer C7 v2
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
The uboot target is named MarsBoard_A10 and it was not build at all.
This fixes a build problem seen by the build bot.
Fixes: 6a3565985f ("sunxi: Added profile for HAOYU Electronics Marsboard A10")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix the target dependency to make it possible to select this module also
on x86 target and its subtargets.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The firmware directory in the Linux kernel was removed in kernel 4.14,
take the e100 firmware files now from the linux-firmware repository
instead. To do so create the new package e100-firmware. This will also
work with older kernel versions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Adds NFS4 client support:
1. Package kmod-fs-nfs is split into kmod-fs-nfs (nfs.ko) and
kmod-fs-nfs-v3 (nfsv3.ko).
2. A new package kmod-fs-nfs-v4 (nfsv4.ko) is created.
3. Package kmod-fs-nfs-common-v4 is renamed to kmod-fs-nfs-rpcsec
and includes additional module rpcsec_gss_krb5.ko.
CONFIG_NFS_V4 goes into kmod-fs-nfs-v4, CONFIG_NFSD_V4 (NFS4
server) is removed. Missing kernel module oid_registry.ko
needed by auth_rpcgss.ko is added to the package.
A new package kmod-crypto-cts needed by rpcsec_gss_krb5.ko is
also created.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
[add dependency to kmod-crypto-ecb in fs-nfs-common-rpcsec]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The module parameters "nogameport=1" and "nocir=1" are needed,
because this is not supported on recent chips and doesn't
really tell if the system is stable.
As this features will already be removed in linux-4.13 or newer,
this module parameters can be removed in the future.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
make check complains about PKG_MIRROR_HASH of the wireless-regdb package:
WARNING: PKG_MIRROR_HASH does not match wireless-regdb-2017-10-20-4343d359.tar.xz
hash 5f5b669f32ae36cb65b1d99efbbbfd42c2983cda32f6448346e3e54ffaba3889
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
The DEFINE_PCI_DEVICE_TABLE macro was removed with upstream commit
7e9321599011 ("treewide: remove references to the now unnecessary
DEFINE_PCI_DEVICE_TABLE").
Use the pci_device_id struct to fix the acx-mac80211 build failure on
ramips.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Without this change, the instance-specific conf-file is being added to procd_add_jail_mount,
but not used by dnsmasq.
Signed-off-by: Emerson Pinter <dev@pinter.com.br>
Usually this function is called for appending some small files only
(like fs marks) but let's just make it more generic and capable of
handling bigger files easily. Increasing buffer to 1 KiB shouldn't hurt.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
It was there in case of adding some "create" command options that should
be parsed before actually creating the output image. It seems we don't
need any at this point so let's drop this function for now.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
CPE ids helps to tracks CVE in packages.
https://cpe.mitre.org/specification/
Thanks to swalker for CPE to package mapping and
keep tracking CVEs.
Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
My compilation failed because of missing uint.* definitions:
In file included from mtd.h:33:0,
from bootstream.c:35:
BootControlBlocks.h:58:2: error: unknown type name 'uint8_t'
uint8_t m_u8DataSetup;
^
BootControlBlocks.h:59:2: error: unknown type name 'uint8_t'
uint8_t m_u8DataHold;
^
BootControlBlocks.h:60:2: error: unknown type name 'uint8_t'
uint8_t m_u8AddressSetup;
^
BootControlBlocks.h:61:2: error: unknown type name 'uint8_t'
uint8_t m_u8DSAMPLE_TIME;
Adding the header file fixes the problem.
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
[fold changes into 001-compile.patch]
Signed-off-by: Mathias Kresin <dev@kresin.me>
The kernel firmware/ is going away, so pull this firmware
from the linux-firmware git repo instead. No actual changes
to the installed files.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Significantly improves throughput on MT76x2, fixes some stability
issues, adds LED support.
Changes:
266ef38 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature
758376d mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature
e764787 Fix errors found by cppcheck
a6fce8a mt7603: add LED definition registers
f658dd2 mt76x2: add LED register definitions
f6a021d mt76x2: Support using PCI ID as chip ID
c9bdcd8 mt76: add led support using mac80211 led framework
58e9138 mt76x2: init: add ma80211 led callbacks
8ea8da3 mt7603: init: add ma80211 led callbacks
ded88cd mt76x2: Add PCI identifier for MT7602
51a6764 mt7603: remove unnecessary mcu register read function
fbdbf65 debugfs: add support for changing the LED pin
cc02e49 mac80211: move DT led configuration to the "led" child node
e4e7734 mt76x2: limit client WCID entries to 0-127
60172cc mt76x2: clear drop flag for all WCIDs on init
d8140b6 mt76x2: clear per-WCID tx rate lookup register
0ce7923 mt76x2: add helper function for setting drop mask
ccc4baf mt76x2: clear drop mask when sending a PS response
ff60d14 mt76: increase rx ring size for mt76x2
b57ada5 mt76x2: add rx statistics registers
af425de mt76x2: fix LNA gain register annotation
efd7724 mt76x2: sync channel gain value with latest reference driver
4af37bd mt76x2: implement dynamic AGC tuning based on false packet detection count
70f2002 mt76x2: add more gain tuning based on the latest reference driver
8f1c8ab mt76x2: sync tx power related values with reference driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Latencies can be much higher on wifi devices, especially with
aggregation. Tune the network stack setting introduced in the previous
commit to account for that
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The wireless regdb is now loaded via firmware loading, CRDA support and
built-in regdb support have been removed.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
9c13096 ubus: Remove unnecessary memset calls.
6d1ea6c libubus: Fix deletion from context's object AVL tree when removing object
e02813b ubusd: don't free messages in ubus_send_msg() anymore
be146ad ubusd: rename goto label from `error` to `out`
27d712d ubusd_monitor: alloc & free the buffer outside of the loop
5f87f54 ubusd: move global retmsg per client
Signed-off-by: Felix Fietkau <nbd@nbd.name>
These adapters support SR-IOV. Thus the host can assign Virtual Functions
(VFs) to different VMs by the PCI-E Passthrough (e.g. VFIO for KVM), to
gain different advantages (performance, VF to VF communications, host
kernel offload, etc.).
Signed-off-by: Chris Blakely <cpblakely@gmail.com>
Add the parent of the sysupgrade script to the list of pids not getting
killed
Signed-off-by: Mat Trudel <mat@geeky.net>
Signed-off-by: John Crispin <john@phrozen.org>
- Remove obsolete patch chunks regarding fixed_freq
- Instead of patching in custom HT40+/- parameters, use the standard
config syntax as much as possible.
- Use fixed_freq for mesh
- Fix issues with disabling obss scan when using fixed_freq on mesh
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Passing the ctrl iface to wpa_supplicant will automatically cause wpa_supplicant
to send "STOP_AP" messages to the hostapd. This breaks the AP interfaces.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
The beacon_int is currently set explicitly for hostapd and when LEDE uses
iw to join and IBSS/mesh. But it was not done when wpa_supplicant was used
to join an encrypted IBSS or mesh.
This configuration is required when an AP interface is configured together
with an mesh interface. The beacon_int= line must therefore be re-added to
the wpa_supplicant config. The value is retrieved from the the global
variable.
Fixes: 1a16cb9c67 ("mac80211, hostapd: always explicitly set beacon interval")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [rebase]
The wpa_supplicant code for IBSS allows to set the mcast rate. It is
recommended to increase this value from 1 or 6 Mbit/s to something higher
when using a mesh protocol on top which uses the multicast packet loss as
indicator for the link quality.
This setting was unfortunately not applied for mesh mode. But it would be
beneficial when wpa_supplicant would behave similar to IBSS mode and set
this argument during mesh join like authsae already does. At least it is
helpful for companies/projects which are currently switching to 802.11s
(without mesh_fwding and with mesh_ttl set to 1) as replacement for IBSS
because newer drivers seem to support 802.11s but not IBSS anymore.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Tested-by: Simon Wunderlich <simon.wunderlich@openmesh.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh]
There is no need to allocate buffer as big as the whole image in order
to calculate CRC32. It's enough to use small buffer and just read file
content block by block.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
This requires changing this helper to accept initial/current CRC32
value as argument but it allows dropping duplicated (complex?) code
calculating the CRC32.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Remove multicast routing firewall rules when the igmpproxy is stopped by
triggering a firewall config change.
Keeping the firewall open from the wan for igmp and udp multicast is not
desired when the igmpproxy service is inactive.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
When a library is using fortify-packages GCC will complain about
"error: format not a string literal, argument types not checked".
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
don't set no-ssl3-method when CONFIG_OPENSSL_WITH_SSL3 di disabled otherwise the compile breaks with this error:
../libssl.so: undefined reference to `SSLv3_client_method'
Fixes CVE: CVE-2017-3735, CVE-2017-3736
Signed-off-by: Peter Wagner <tripolar@gmx.at>
Check if the compiler defines __linux__, instead of assuming that the
host OS is the same as the target OS.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The QorIQ FRDM-LS1012A Board is an ultra-low-cost
development platform for QorIQ LS1012A Series Network
Processors built on ARM Cortex-A53 processor.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
This patch is to add PPA (The Primary Protected Application)
package and also enable it for all layerscape devices.
LSDK github provides ppa source code git tree, but it
only could be compiled with 64-bit toolchain. For 32-bit
devices, there was no method to use it.
https://github.com/qoriq-open-source/ppa-generic
This patch is to directly use a private ppa binary tree for
both 32-bit and 64-bit devices.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
This patch is to use ppfe git tree on LSDK github
instead of private git tree, and support the latest
ppfe on ls1012ardb.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
restool is a user space application providing the
ability to dynamically create and manage Layerscape
DPAA2 containers and objects from Linux.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
This patch is to add data path layout files for the
second generation Data Path Acceleration Architecture.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
This patch is to add package support for Management
Complex Firmware for the second generation Data Path
Acceleration Architecture.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Shell function return code only has range [0, 255]. Other values will
be truncated, e.g. return 65536 will have the same effect as return 0
While at it, drop other "return $rc" where rc will almost always take
value 0 and whose value current callers actually do not check
Fixes FS#988
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
When we run "opkg install" on a package that installs an uci-defaults
script, functions.sh will fail to evaluate that script in its
default_postinst function.
This happens because there is no "./" present and it searches for the
file in paths specified by the PATH variable. This would work on bash,
but it will not work on ash and some other shells like sh, zsh. This
applys to the ". filename" directive used in this case.
This patch will make the path relative to the /etc/uci-defaults
directory.
Fixes: FS#1021
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Due to limitations in the symvers treatment and the mei drivers
exporting the same funtions, modpost might use the wrong mei driver
to link against.
Work around this by renaming them all to the same name, making it
always the "right" module name even if the wrong file was used.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Apearently we need to ensure mwlwifi loads before mwifiex on
the WRT3200ACM, else mwifiex will claim the wifi.
Fix this by reverting to AutoLoad, but keep the removal of
mac80211 line.
This partially reverts commit 471d5dc6e3.
Fixes: 471d5dc6e3 ("mwlwifi: switch to AutoProbe")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Let the generic postinstall script invoke "kmodloader" when the just
installed package contains any /etc/module.d/ entries.
This allows us to skip the explicit "insert_module()" calls in the
package postinstall.
Due to the removed insert_module calls we do not need to assemble a
complete list of modules per package anymore, which allows for vast
simplification of the package generation code.
While we're at it, also support specifying default parameters for
modules using either the MODPARAM or MODPARAM.modulename variables
in KernelPackage.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Update to latest Git in order to fix potential memory corruption and invalid
memory access when handling query strings in conjunction with active basic
authentication.
a235636 2017-11-04 file: fix query string handling
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
commit fbde9ac718 set an incorrect sha256sum which doesn't match the
file http://sources.lede-project.org/netifd-2017-10-31-0f96606b.tar.xz
or a locally packaged checkout (which resulted in a file identical with
the one referenced by the URL above).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
By default, hostapd assumes r1_key_holder equal to bssid. If LEDE
configures the same static r1 key holder ID on two different APs (BSSes) the
RRB exchanges fails behind them.
Signed-off-by: Yury Shvedov <yshvedov@wimarksystems.com>
- H3 @ 1.3 GHz
- 1GiB DDR3
- 10/100Mbps Ethernet
- Realtek RTL8189ETV wifi
- 4 USB 2.0
Difference to the "Orange Pi Plus" is the lack of Gbit ethernet
and lack of onboard flash.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC.
http://linux-sunxi.org/MarsBoard_A10
Signed-off-by: Kayo Phoenix <kayo@illumium.org>
[Forward-ported to new target layout:]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Defining it will let the build tool download the tarball file from
a buildbot server, avoiding a clone of the source repo.
Signed-off-by: Arjun AK <lede@arjunak.com>
7a49632 logd: use uloop instead of ustream_fd for syslog
69d6542 logd: only create pipe in stream mode
df30c8c logread: terminate after EOF
bdcacad logd: implement oneshot mode for stream log read
4a10d4e logread: use oneshot mode without -f, wait for logd to close
ea3d7fa logd: enforce line length limit for ubus based log messages as well
960a29d logread: remove leftover debug code
a081904 logread: fix line buffer size
2c0d9cf logd: move stripping of newlines to log_add()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Newer devices tend to only support the newer version of the pin
verification command, so also try that one.
Fixes PIN issues with modems like the Sierra Wireless MC7455
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Without this change, when a user disables seccomp support in .config,
procd does not get recompiled unless the package is cleaned manually.
It is because when -D option is missing from cmake command line, cmake
uses cached value from the previous run where seccomp was enabled.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
If we enable -fstack-protector while building libunwind, function
__stack_chk_fail_local will be referred to for i386 and powerpc32
arches. This will cause link failure because the default gcc build
specs says no link_ssp if -nostdlib is given.
The error message:
OpenWrt-libtool: link: ccache_cc -shared -fPIC -DPIC .libs/os-linux.o mi/.libs/init.o mi/.libs/flush_cache.o mi/.libs/mempool.o mi/.libs/strerror.o x86/.libs/is_fpreg.o x86/.libs/regname.o x86/.libs/Los-linux.o mi/.libs/backtrace.o mi/.libs/dyn-cancel.o mi/.libs/dyn-info-list.o mi/.libs/dyn-register.o mi/.libs/Ldyn-extract.o mi/.libs/Lfind_dynamic_proc_info.o mi/.libs/Lget_accessors.o mi/.libs/Lget_proc_info_by_ip.o mi/.libs/Lget_proc_name.o mi/.libs/Lput_dynamic_unwind_info.o mi/.libs/Ldestroy_addr_space.o mi/.libs/Lget_reg.o mi/.libs/Lset_reg.o mi/.libs/Lget_fpreg.o mi/.libs/Lset_fpreg.o mi/.libs/Lset_caching_policy.o x86/.libs/Lcreate_addr_space.o x86/.libs/Lget_save_loc.o x86/.libs/Lglobal.o x86/.libs/Linit.o x86/.libs/Linit_local.o x86/.libs/Linit_remote.o x86/.libs/Lget_proc_info.o x86/.libs/Lregs.o x86/.libs/Lresume.o x86/.libs/Lstep.o x86/.libs/getcontext-linux.o -Wl,--whole-archive ./.libs/libunwind-dwarf-local.a ./.libs/libunwind-elf32.a -Wl,--no-whole-archive -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/target-i386_i486_musl-1.1.16/usr/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/target-i386_i486_musl-1.1.16/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/toolchain-i386_i486_gcc-5.4.0_musl-1.1.16/usr/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/toolchain-i386_i486_gcc-5.4.0_musl-1.1.16/lib -lc -lgcc -Os -march=i486 -fstack-protector -Wl,-z -Wl,now -Wl,-z -Wl,relro -nostartfiles -nostdlib -Wl,-soname -Wl,libunwind.so.8 -o .libs/libunwind.so.8.0.1
.libs/os-linux.o: In function `_Ux86_get_elf_image':
os-linux.c:(.text+0x588): undefined reference to `__stack_chk_fail_local'
x86/.libs/Lregs.o: In function `_ULx86_access_fpreg':
Lregs.c:(.text+0x25b): undefined reference to `__stack_chk_fail_local'
x86/.libs/Lresume.o: In function `_ULx86_resume':
Lresume.c:(.text+0xdc): undefined reference to `__stack_chk_fail_local'
collect2: error: ld returned 1 exit status
Makefile:2249: recipe for target 'libunwind.la' failed
The snippet from gcc -dumpspecs
%{!nostdlib:%{!nodefaultlibs:%(link_ssp) %(link_gcc_c_sequence)}}
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Update wireguard to latest snapshot:
9fc5daf version: bump snapshot
748ca6b compat: unbreak unloading on kernels 4.6 through 4.9
7be9894 timers: switch to kees' new timer_list functions
6be9a66 wg-quick: save all hooks on save
752e7af version: bump snapshot
2cd9642 wg-quick: fsync the temporary file before renaming
b139499 wg-quick: allow for saving existing interface
582c201 contrib: add reresolve-dns
8e04be1 tools: correct type for CTRL_ATTR_FAMILY_ID
c138276 wg-quick: allow for the hatchet, but not by default
d03f2a0 global: use fewer BUG_ONs
6d681ce timers: guard entire setting in block
4bf32ca curve25519: only enable int128 if compiler support is sound
86e06a3 device: expand scope of destruct lock
e3661ab global: get rid of useless forward declarations
bedc77a device: only take reference if netns is different
7c07e22 wg-quick: remember to rewind DNS settings on failure
2352ec0 wg-quick: allow specifiying multiple hooks
573cb19 qemu: test using four cores
e09ec4d global: style nits
4d3deae qemu: work around ccache bugs
7491cd4 global: infuriating kernel iterator style
78e079c peer: store total number of peers instead of iterating
d4e2752 peer: get rid of peer_for_each magic
6cf12d1 compat: be sure to include header before testing
3ea08d8 qemu: allow for cross compilation
d467551 crypto/avx: make sure we can actually use ymm registers
c786c46 blake2: include headers for macros
328e386 global: accept decent check_patch.pl suggestions
a473592 compat: fix up stat calculation for udp tunnel
9d930f5 stats: more robust accounting
311ca62 selftest: initialize mutex in routingtable selftest
8a9a6d3 netns: use time-based test instead of quantity-based
e480068 netns: use read built-in instead of ncat hack for dmesg
Compile-tested-for: ar71xx
Run-tested-on: ar71xx Archer C7 v2
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Unset the default LED gpio pin if the same gpio pin is used by a button
defined via platform button. It prevents the change of the GPIO value
on wireless up/down or wireless traffic.
Fixes: FS#1129
Signed-off-by: Mathias Kresin <dev@kresin.me>
Upgrade uboot-kirkwood to upstream release 2017.09
Catch up with upstream and move configuration options from
simple defines to Kconfig, as otherwise dependencies would
not be resolved and code would not compile.
Tested-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Commit 2e496876c6 fixed the generation of the depends line for external
kernel modules which makes it possible for the build system to
automatically detect this missing dependency.
This fixes the packaging of kmod-ltq-atm for the ar9, xway and
xway-legacy subtarget.
Fixes: FS#1124
Signed-off-by: Mathias Kresin <dev@kresin.me>
Unmodified dns and domain variables could be needed in user script (/etc/udhcpc.user).
Signed-off-by: Tero Jänkä <tero.janka@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cleanup)
Switch from git to xz release tarball as there's no good reason to keep
using git when release tarballs are provided.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
OpenSSL is built with the generic linux settings for most targets,
including aarch64. These generic settings are designed for 32-bit CPU and
provide no assembler optmization: this is widely suboptimal for aarch64.
This patch simply switches to the aarch64 settings that are already
available in OpenSSL.
Here is the output of "openssl speed" before the optimization, with
"(...)" representing build flags that didn't change:
OpenSSL 1.0.2l 25 May 2017
options:bn(64,32) rc4(ptr,char) des(idx,cisc,2,int) aes(partial) blowfish(ptr)
compiler: aarch64-openwrt-linux-musl-gcc (...)
And after this patch, OpenSSL uses 64 bit mode and assembler optimizations:
OpenSSL 1.0.2l 25 May 2017
options:bn(64,64) rc4(ptr,char) des(idx,cisc,2,int) aes(partial) blowfish(ptr)
compiler: aarch64-openwrt-linux-musl-gcc (...) -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM
Here are some benchmarks on a pine64+ running latest LEDE master r5142-20d363aed3:
before# openssl speed sha aes blowfish
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
sha1 3918.89k 9982.43k 19148.03k 24933.03k 27325.78k
sha256 4604.51k 10240.64k 17472.51k 21355.18k 22801.07k
sha512 3662.19k 14539.41k 21443.16k 29544.11k 33177.60k
blowfish cbc 16266.63k 16940.86k 17176.92k 17237.33k 17252.35k
aes-128 cbc 19712.95k 21447.40k 22091.09k 22258.35k 22304.09k
aes-192 cbc 17680.12k 19064.47k 19572.14k 19703.13k 19737.26k
aes-256 cbc 15986.67k 17132.48k 17537.28k 17657.17k 17689.26k
after# openssl speed sha aes blowfish
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
sha1 6770.87k 26172.80k 86878.38k 205649.58k 345978.20k
sha256 20913.93k 74663.85k 184658.18k 290891.09k 351032.66k
sha512 7633.10k 30110.14k 50083.24k 71883.43k 82485.25k
blowfish cbc 16224.93k 16933.55k 17173.76k 17234.94k 17252.35k
aes-128 cbc 19425.74k 21193.31k 22065.74k 22304.77k 22380.54k
aes-192 cbc 17452.29k 18883.84k 19536.90k 19741.70k 19800.06k
aes-256 cbc 15815.89k 17003.01k 17530.03k 17695.40k 17746.60k
For some reason AES and blowfish do not benefit, but SHA performance
improves between 1.7x and 15x. SHA256 clearly benefits the most from the
optimization (4.5x on small blocks, 15x on large blocks!).
When using EVP (with "openssl speed -evp <algo>"):
# Before, EVP mode
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
sha1 3824.46k 10049.66k 19170.56k 24947.03k 27325.78k
sha256 3368.33k 8511.15k 16061.44k 20772.52k 22721.88k
sha512 2845.23k 11381.57k 19467.69k 28512.26k 33008.30k
bf-cbc 15146.74k 16623.83k 17092.01k 17211.39k 17249.62k
aes-128-cbc 17873.03k 20870.61k 21933.65k 22216.36k 22301.35k
aes-192-cbc 16184.18k 18607.15k 19447.13k 19670.02k 19737.26k
aes-256-cbc 14774.06k 16757.25k 17457.58k 17639.42k 17686.53k
# After, EVP mode
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
sha1 7056.97k 27142.10k 89515.86k 209155.41k 347419.99k
sha256 7745.70k 29750.06k 95341.48k 211001.69k 332376.75k
sha512 4550.47k 18086.06k 39997.10k 65880.75k 81431.21k
bf-cbc 15129.20k 16619.03k 17090.56k 17212.76k 17246.89k
aes-128-cbc 99619.74k 269032.34k 450214.23k 567353.00k 613933.06k
aes-192-cbc 93180.74k 231017.79k 361766.66k 433671.51k 461731.16k
aes-256-cbc 89343.23k 209858.58k 310160.04k 362234.88k 380878.85k
Blowfish does not seem to have assembler optimization at all, and SHA
still benefits (between 1.6x and 14.5x) but is generally slower than in
non-EVP mode.
However, AES performance is improved between 5.5x and 27.5x, which is
really impressive! For aes-128-cbc on large blocks, a core i7-6600U
@2.60GHz is only twice as fast...
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Newer kernels treat differing signatures an error, not just a warning,
so fix the signatures to match.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Minimum supported kernel is 3.18, so we don't need to test for anything
older. In addition, the API hasn't changed since then, so we don't need
to check for any kernel version at all. This helps to keeps the amount
of changes more managable.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Refresh patches
Remove 320-curl-confopts.m4-fix-disable-threaded-resolver.patch as
integrated upstream
See https://curl.haxx.se/changes.html for the bugfixes in 7.56.0 and
7.56.1
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Changes in v1.27.0 :
build: Fixed accidental compiler flags concatenation for MSVC (Patch from LazyHamster) (GH-1029)
build: Reduce libxml2 version requirement to 2.6.26 (Patch from Mike Lothian) (GH-1020)
asio: Support for Windows / MinGW (Patch from Daniel Evers) (GH-1027)
h2load: Print out h2 header fields with --verbose option (GH-1015)
nghttpx: Send non-final response to HTTP/1.1 or HTTP/2 client only (GH-1016)
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Commit 2e496876c6 fixed the generation of the depends line for external
kernel modules which makes it possible for the build system to
automatically detect this missing dependency. This fixes the build bot
build of the lantiq/aes target.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The build system already defines KERNEL_CROSS which defaults to TARGET_CROSS.
Make use of this variable for kernel makefiles.
Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reoder the build to build the glue module first and pass the glue module's
Module.symvers to the wl driver builds.
This allows modpost to properly store a wl_glue dependency in the driver.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
We already have a DEPENDS on mac80211, which should be enough to ensure
headers are available before build.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
This reverts commit e7373e489d.
Support of "-s" depends on the CONFIG_DEBUG_SYSLOG compile time flag which
is not enabled for all build variants.
Revert the change for now until we can properly examine the size impact of
CONFIG_DEBUG_SYSLOG.
Fixes FS#1117.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The init script generated something like "DEVICE=/dev/sda" when it should
have been generating "DEVICE /dev/sda". mdadm errors on this. Patch by jow.
Also changed the default sendmail path to /usr/sbin/sendmail. No package
in LEDE provides /sbin/sendmail. msmtp provides /usr/sbin/sendmail so use
that.
Also add a patch to fix file paths for mdadm runtime files. mdadm currently
errors on them since /run is missing. Once /run is added to stock LEDE, this
patch can be removed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The package kmod-ipt-debug builds the module xt_TRACE, which allows
users to use '-j TRACE' as target in the chain PREROUTING of the table
raw in iptables.
The kernel compilation flag NETFILTER_XT_TARGET_TRACE is also enabled so
that this feature which is implemented deep inside the linux IP stack
(for example in sk_buff) is compiled.
But a strace of iptables -t raw -I PREROUTING -p icmp -j TRACE reveals
that an attempt is made to read /usr/lib/iptables/libxt_TRACE.so, which
fails as this dynamic library is not present on the system.
I created the package iptables-mod-trace which takes care of that, and
target TRACE now works!
https://dev.openwrt.org/ticket/16694https://dev.openwrt.org/ticket/19661
Signed-off-by: Martin Wetterwald <martin.wetterwald@corp.ovh.com>
[Jo-Philipp Wich: also remove trace extension from builtin extension list
and depend on kmod-ipt-raw since its required for rules]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Backport two fixes for the fix of CVE-2017-13080, preventing side channel
attacks and making it work for TKIP.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Backport HANDSHAKE and TRAINING notification from ltq-vdsl-app. It
unifies the dsl led blinking pattern accross all subtargets and allows
to get the current line status from the dsl led.
Signed-off-by: Mathias Kresin <dev@kresin.me>
The lantiq ATM driver is load for all subtargets on demand now. There
is not need to handle the xrx200 ATM driver in a special way any
longer.
Signed-off-by: Mathias Kresin <dev@kresin.me>
This change makes it possible to configure the wan/dsl ppp interface
settings independantly from the used TC-Layer (ATM/PTM).
By using dsl0 as interface name as for the xrx200 we can get rid of a
few conditionals which were introduced because of the different default
TC-Layer in xway and xrx200.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Due a compiler bug on ARM targets
( https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64516 )
unaligned access was disabled on all targets other than i386 and
x86_64 with commit 061319ec3d .
A fix has been added to lzo-2.09 so it is not necessary to disable
unaligned access within the Makefile anymore.
Signed-off-by: Stefan Oberhumer <stefan@obssys.com>
This backports the upstream commit fixing stale references to
CONFIG_SUNXI_GMAC which have been later replaced by CONFIG_SUN7I_GMAC.
This fixes the designware MAC pinmuxing on e.g: Lamobo R1.
Refresh patches while we are at it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This driver supports the Bosch Sensortec BMP180/BMP280 pressure and
temperature sensors. It also supports the BME280 sensors with an
additional humidity channel.
Tested I2C and SPI modes with a BME280 sensor on a Raspberry Pi Zero W.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The previous commit did not adjust PKG_RELEASE, therefore the
hostapd/wpad/wpa_supplicant packages containing the AP-side workaround
for KRACK do not appear as opkg update.
Bump the PKG_RELEASE to signify upgrades to downstream users.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This is a simple version bump. Changes:
* noise: handshake constants can be read-only after init
* noise: no need to take the RCU lock if we're not dereferencing
* send: improve dead packet control flow
* receive: improve control flow
* socket: eliminate dead code
* device: our use of queues means this check is worthless
* device: no need to take lock for integer comparison
* blake2s: modernize API and have faster _final
* compat: support READ_ONCE
* compat: just make ro_after_init read_mostly
Assorted cleanups to the module, including nice things like marking our
precomputations as const.
* Makefile: even prettier output
* Makefile: do not clean before cloc
* selftest: better test index for rate limiter
* netns: disable accept_dad for all interfaces
Fixes in our testing and build infrastructure. Now works on the 4.14 rc
series.
* qemu: add build-only target
* qemu: work on ubuntu toolchain
* qemu: add more debugging options to main makefile
* qemu: simplify shutdown
* qemu: open /dev/console if we're started early
* qemu: phase out bitbanging
* qemu: always create directory before untarring
* qemu: newer packages
* qemu: put hvc directive into configuration
This is the beginning of working out a cross building test suite, so we do
several tricks to be less platform independent.
* tools: encoding: be more paranoid
* tools: retry resolution except when fatal
* tools: don't insist on having a private key
* tools: add pass example to wg-quick man page
* tools: style
* tools: newline after warning
* tools: account for padding being in zero attribute
Several important tools fixes, one of which suppresses a needless warning.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Commit 2127425434 introduced an AP-side
workaround for key reinstallation attacks. This option can be used to
mitigate KRACK on the station side, in case those stations cannot be
updated. Since many devices are out there will not receive an update
anytime soon (if at all), it makes sense to include this workaround.
Unfortunately this can cause interoperability issues and reduced
robustness of key negotiation, so disable the workaround by default, and
add an option to allow the user to enable it if he deems necessary.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The previous CVE bugfix commit did not adjust PKG_RELEASE, therefore the
fixed hostapd/wpad/wpa_supplicant packages do not appear as opkg update.
Bump the PKG_RELEASE to signify upgrades to downstream users.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
This fixes a compile problem recently introduced by me.
Fixes: f40fd43ab2 ("ppp: fix compile warning")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move wireguard from openwrt/packages to base a package.
This follows the pattern of kmod-cake and openvpn. Cake is a fast-moving
experimental kernel module that many find essential and useful. The
other is a VPN client. Both are inside of core. When you combine the two
characteristics, you get WireGuard. Generally speaking, because of the
extremely lightweight nature and "stateless" configuration of WireGuard,
many view it as a core and essential utility, initiated at boot time
and immediately configured by netifd, much like the use of things like
GRE tunnels.
WireGuard has a backwards and forwards compatible Netlink API, which
means the userspace tools should work with both newer and older kernels
as things change. There should be no versioning requirements, therefore,
between kernel bumps and userspace package bumps.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Felix Fietkau <nbd@nbd.name>
This change makes it possible to configure the wan/dsl ppp interface
settings independantly from the used TC-Layer (ATM/PTM).
Now you can move a device from an ADSL/ATM port to an VDSL/PTM port
without any configuration changes for example.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[use the dsl0 interface name for the default netdev trigger in 01_led,
add ip dependency]
Signed-off-by: Mathias Kresin <dev@kresin.me>
This fixes a build problem with many targets.
Fixes 618ed77a17 ("mac80211: add ath6kl kernel modules")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
MACsec/IEEE 802.1AE is useful to secure communication to and
from endpoints at Layer 2.
Starting with 4.6, the linux kernel provides a universal
macsec driver for authentication and encryption of traffic
in a LAN, typically with GCM-AES-128, and optional replay
protection.
http://standards.ieee.org/getieee802/download/802.1AE-2006.pdf
Note:
LEDE can utilize MACsec with a static connectivity association
key (static PSK) with the ip-full package installed.
<http://man7.org/linux/man-pages/man8/ip-macsec.8.html>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Zoltan HERPAI
Felix Fietkau
Peter Wagner
Hans Dedecker
Rafał Miłecki
Daniel Golle
Rosen Penev
Timo Sigurdsson
Russell Senior
Ted Hess
Roman Yeryomin
Yousong Zhou
Borja Salazar
Jo-Philipp Wich
Kevin Darbyshire-Bryant
Stijn Tintel
Daniel Engberg
Fushan Wen
Hauke Mehrtens
Marcin Jurkowski
Martin Schiller
Christian Lamparter
Mathias Kresin
Leon M. George
John Crispin
Emerson Pinter
Alexander Couzens
Luis Araneda
Simon Wunderlich
Bjørn Mork
Jianhui Zhao
Chris Blakely
Zhai Zhaoxuan
Mat Trudel
Antonio Quartulli
Sven Eckelmann
Sven Eckelmann
Piotr Dymacz
Jaroslav Safka
Pierre Lebleu
Yangbo Lu
Marko Ratkaj
Jonas Gorski
Yury Shvedov
Denis Osvald
Marek Vasut
Ralph Sennhauser
Kayo Phoenix
Arjun AK
Philip Prindeville
Koen Vandeputte
Michal Sojka
Edmunt Pienkowsky
Paul Wassi
Tero Jänkä
Baptiste Jonglez
Karl Vogel
Matt Mets
Martin Wetterwald
Henryk Heisig
Stefan Oberhumer
Florian Fainelli
Jason A. Donenfeld